★ Must-know
The thoracic limb connects to the trunk through the shoulder girdle and comprises the shoulder girdle, arm, forearm, elbow, wrist, and hand.
The shoulder girdle is formed by the clavicle and scapula, together with the sternum and rib cage, and orients the upper limb in space.
The humerus forms the arm skeleton, the radius and ulna form the forearm skeleton, and the carpal bones, metacarpals, and phalanges form the hand skeleton.
Further detail
★ Must-know
Further detail
To orient the clavicle, place the subclavian groove inferiorly, the flattened end laterally, and the concave edge of that end anteriorly.
The clavicle has a body and two ends: a medial sternal end and a lateral acromial end.
The sternal end has a large triangular articular facet for the sternum and first costal cartilage, while the acromial end has an elongated facet for the scapular acromion.
Because the clavicle lies superficially beneath the skin, fractures can endanger vessels and nerves, and acromioclavicular dislocations can occur.
Picture an italic S bridging the sternum medially to the scapula laterally.
★ Must-know
The dorsal scapular spine divides the convex posterior face into a supraspinous fossa above and an infraspinous fossa below, and continues laterally as the acromion, which articulates with the clavicle.
The cranial border has a scapular notch converted by the superior transverse scapular ligament into a foramen for the suprascapular nerve.
The lateral scapular angle contains the glenoid cavity, coracoid process, and neck; the glenoid cavity faces outward and forward and articulates with the humeral head.
Further detail
Orient the scapula with its excavated surface anteriorly, its shorter edge cranially, and its thickest edge bearing the articular surface laterally.
The scapula is described by:
The scapular spine gives attachment to the trapezius and deltoid, the supraspinous fossa to the supraspinatus, and the infraspinous fossa to the infraspinatus and teres muscles.
The coracoid process gives attachment to the coracobrachialis and short head of biceps at its apex, pectoralis minor medially, and coracoacromial and coracohumeral ligaments laterally.
Scapular fractures are rare and usually involve the neck or pillar, while suprascapular nerve compression by the superior transverse scapular ligament can paralyze the supraspinatus and infraspinatus.
The excavated costal face is anterior; the spine divides the convex dorsal face.
★ Must-know
The proximal humerus has a surgical neck and three projections: the articular humeral head and the non-articular major and minor tubercles.
The major tubercle lies lateral to the humeral head and receives the infraspinatus, supraspinatus, and teres minor muscles, whereas the minor tubercle lies anteriorly and medially and receives the subscapularis.
The distal humeral epiphysis is flattened from front to back and comprises the articular humeral condyle between two non-articular projections, the medial and lateral epicondyles.
📌 The laterally situated capitulum articulates with the fossa of the radial head and is surmounted by the radial fossa, whereas the medially situated trochlea articulates with the trochlear incisure of the ulna.
Further detail
The deltoid tuberosity on the middle of the anterolateral shaft receives the deltoid, while the brachialis attaches below it.
The humeral head is directed medially, superiorly, and posteriorly, represents one third of a sphere with a 30 mm radius, and forms a 130° angle with the diaphyseal axis.
The humeral head articulates with the scapular glenoid cavity and is separated from the major and minor tubercles by the anatomical neck.
The intertubercular groove separates the two humeral tubercles, and the transverse ligament converts it into an osteofibrous tunnel for the long head of the biceps brachii.
The humeral surgical neck separates the proximal epiphysis from the shaft and is fragile and prone to fracture.
The humeral condyle consists of:
The medial cheek of the humeral trochlea is wider and more prominent than its lateral cheek, and the cheeks are separated by a groove.
The trochlea is surmounted by the coronoid fossa anteriorly and the olecranon fossa posteriorly, while the capitulotrochlear zone articulates with the medial border of the radial articular fossa.
The capitulum is lateral and meets the radius; the trochlea is medial and meets the ulna.
★ Must-know
The radius and ulna are the two mobile long bones of the forearm, joined by proximal and distal radioulnar joints and the interosseous membrane; their relative rolling movement is pronosupination.
The radial head has a fovea articulating with the humeral capitulum, a bevelled medial border corresponding to the capitulotrochlear area, and an articular circumference articulating with the ulnar radial notch; the annular ligament surrounds and maintains it.
Pouteau-Colles fractures affect the distal radius and commonly occur after a fall onto the palm with the wrist extended.
Further detail
The radial shaft has three surfaces: the anterior surface bears the nutrient foramen and gives insertion to flexor pollicis longus proximally and pronator quadratus distally; the lateral surface gives insertion to supinator and pronator teres; and the posterior surface gives insertion to abductor pollicis longus and extensor pollicis brevis.
The radial neck is encircled from front to back by the deep branch of the radial nerve and gives insertion to the supinator, while the anteromedial radial tuberosity gives insertion to biceps brachii.
📌 The radial styloid process descends lower than the ulnar styloid process, and the radial head and radial styloid process are palpable landmarks.
The radius forms the lateral forearm; the ulna forms the medial forearm.
★ Must-know
Further detail
The ulna is oriented with its largest epiphysis above, its hooked articular surface anteriorly, and its small articular facet laterally.
The ulna’s anterior shaft surface contains the nutrient foramen and gives insertion to flexor digitorum profundus superiorly and pronator quadratus inferiorly; its medial surface also gives insertion to flexor digitorum profundus.
The posterior ulnar surface has an upper triangular area for anconeus and a vertical ridge dividing it into a lateral zone for abductor pollicis longus, extensor pollicis brevis, extensor pollicis longus, and extensor indicis, and a medial zone for extensor carpi ulnaris.
The olecranon is a posterior vertical process whose upper face gives insertion to triceps brachii, anterior face forms the upper articular part of the trochlear incisure, posterior surface is subcutaneous, and medial and lateral surfaces attach to elbow collateral ligaments.
The coronoid process is a horizontal anterior process whose anterior surface gives insertion to brachialis, medial surface attaches to the ulnar collateral ligament, and lateral surface bears the radial incisure for the radial articular circumference; the supinator fossa lies below it.
The distal ulnar head articulates laterally with the ulnar notch of the radius and attaches to the articular disc, as does the ulnar styloid process, which descends less than the radial styloid process.
Olecranon fractures are common, coronoid process fractures may occur with elbow dislocations, and the olecranon, ulnar head, and ulnar styloid process are palpable landmarks.
The ulna’s anterior or medial edge gives insertion to flexor digitorum profundus above and pronator quadratus below; its posterior edge attaches to the medial antebrachial intermuscular septum, extensor carpi ulnaris, and flexor carpi ulnaris; its interosseous border attaches to the interosseous membrane.
★ Must-know
The hand skeleton consists of carpal bones forming the wrist, metacarpals forming the palm, and phalanges forming the fingers; its palmar face is the palm and its dorsal face is the back of the hand.
The carpus comprises eight short bones arranged in two rows and is concave anteriorly, forming a carpal groove that the flexor retinaculum converts into the carpal tunnel.
There are five metacarpals; the third is the longest and defines the axis of the hand, and each has a base, triangular body, and head.
The thumb has two phalanges, whereas each other finger has three: proximal P1, middle P2, and distal P3.
Further detail
The carpal groove is bounded laterally by the scaphoid and trapezium tubercles and medially by the pisiform and hamulus of the hamate.
The scaphoid and trapezium contribute to the thumb column, and the capitate is the largest carpal bone and the axis of the wrist.
The metacarpal bases articulate with the distal carpal row and with one another, except that the first metacarpal is independent, while their heads articulate with the proximal phalanges.
A left wrist and hand X-ray can determine a child’s bone age from ossification of the carpal bones and long-bone epiphyses; scaphoid fractures are serious because poor vascularisation makes healing long and difficult, and fifth-metacarpal fractures are common.
Take a 11-question practice quiz on Forearm and Hand Skeleton, with every answer explained.
1. Which statements accurately describe how the thoracic limb connects to the trunk and how the shoulder girdle is organized?
2. A clinician is identifying the bones and movements of a patient’s upper limb; which statements are accurate?
Memorize the key concepts of Forearm and Hand Skeleton with 10 flashcards.
What connects the thoracic limb to the trunk?
The shoulder girdle.
What orients the upper limb in space?
The shoulder girdle.
What bony connection does the clavicle provide between the rib cage and thoracic limb?
The only bony link between them.
Upload your class notes and Revizly writes a study guide, a quiz and flashcards in about a minute.
Study guide maker