β Must-know
Further detail
The solar radiation spectrum is close to that of a black body with a temperature of 5600 K.
The electromagnetic spectrum includes:
Very high frequency radiation is used in nuclear magnetic resonance, while ultra high frequency radiation is used in electron paramagnetic resonance.
β Must-know
π Electromagnetic radiation has wave-like and particle-like properties, a concept called wave-particle duality.
π Formula - The speed of light, wavelength, and frequency are related by , where the speed of light in vacuum is 300,000 km/s.
π Formula - Photon energy is given by the PlanckβEinstein relation , where h is Planckβs constant and Ξ½ is frequency.
Further detail
An electromagnetic wave consists of electric and magnetic fields that are perpendicular to each other, oscillate in phase, and propagate in the direction of the wave vector.
Interference is the superposition of two waves that produces a new wave pattern, which may be constructive or destructive.
Electromagnetic radiation may be described using frequency, energy, wavelength, or inverse wavelength (wavenumber).
When an excited electron returns to the lowest energy level, it can emit a photon.
Waves explain interference; photons explain absorption and emission.
β Must-know
π Singlet states have antiparallel spins and are diamagnetic, whereas the triplet state has parallel spins and interacts with an external magnetic field.
π Transitions between electronic states of the same spin multiplicity are allowed, while transitions between states of different spin multiplicity are formally forbidden but may occur through spin-orbit coupling.
The BornβOppenheimer approximation separates a moleculeβs quantum-mechanical wavefunction into electronic and nuclear components, with the nuclear component including vibrational and rotational motion. - Born and Oppenheimer
Absorption of a photon of appropriate energy promotes a valence electron from the ground state to a vibrational level in the excited singlet manifold.
After absorption, vibrational relaxation and internal conversion bring the excited molecule to the lowest vibrational level of S1, designated S1,0, in about one picosecond.
Further detail
In the first step of the BornβOppenheimer approximation, the electronic SchrΓΆdinger equation is solved for the electronic wavefunction with the nuclei fixed in an equilibrium configuration. - Born and Oppenheimer
Light absorption occurs in about one femtosecond, so the much heavier nuclei remain effectively fixed during the transition.
At room temperature, the lowest vibrational level S0,0 is populated because the energy difference to the next vibrational level is much larger than kBT.
Absorption and emission bands in the condensed phase are broad, whereas sharp transitions are observed for atoms or molecules in the gaseous phase.
β Must-know
π The FranckβCondon principle states that the most intense vibronic transition connects a vibrational state to the state vertically above it in the other electronic state.
Further detail
For intense, strongly allowed transitions, the oscillator strength is approximately 1.
The transition dipole couples the wavefunctions of the ground and excited electronic states, and the oscillator strength is proportional to the transition energy times the squared magnitude of the transition dipole.
The transition dipole can be factored into electronic and nuclear contributions, with the nuclear-coordinate overlap called the FranckβCondon vibrational overlap.
For fluorescence, the transitions S1,0βS0,1 and S1,0βS0,2 have larger FranckβCondon factors than S1,0βS0,0.
β Must-know
From the lowest vibrational level of S1, a molecule can emit fluorescence to S0, decay non-radiatively to S0 by internal conversion, or undergo intersystem crossing to the lowest triplet state.
Fluorescence originates from the zeroth vibrational level of the first excited state, S1,0, irrespective of which electronic energy level was initially excited.
A molecule in the triplet state can remain there from microseconds to seconds because the singletβtriplet and tripletβsinglet transitions are spin-forbidden.
Further detail
Fluorescence lasts approximately 1β100 nanoseconds, with emission on the nanosecond timescale.
Fluorescence fine structure reports vibrations in the ground state, whereas absorption vibronic bands provide information about vibrations in higher excited electronic states.
Solvent interactions can increase the Stokes shift.
Long-lived phosphorescence lasting milliseconds to seconds can be observed in rigid or deoxygenated solutions.
In solution, collisions transfer energy from a triplet-state aromatic molecule to triplet-ground-state O2, generating reactive singlet oxygen that can oxidize and destroy the aromatic molecule.
An absorption spectrum is measured by selecting monochromatic light from a broad source, splitting it into beams through a sample cuvette and a solvent-only reference cuvette, measuring transmitted intensities across wavelengths, and determining absorbance from the sample and reference intensities.
According to the LambertβBeer law, absorbance at wavelength Ξ» depends on the extinction coefficient Ξ΅(Ξ»), concentration c, and cuvette path length d; the example path length is 1 cm.
A fluorescence spectrum is measured by exciting the sample with monochromatic light and collecting fluorescence at right angles to the excitation beam, then measuring intensity across emission wavelengths with a monochromator.
Fluorescence is nanosecond emission from S1; phosphorescence is long-lived emission from the triplet state.
β Must-know
π Formula - The fluorescence quantum yield equals the radiative-transition rate divided by the sum of radiative and non-radiative transition rates: .
Further detail
Any molecular mechanism that non-radiatively depopulates the excited state reduces the fluorescence quantum yield.
The fluorescence lifetime is the time required for fluorescence intensity to fall to 1/e, or 1/2.71, of its initial value.
A Ξ΄-pulse is an excitation light pulse of infinitesimally small duration, such as 1 femtosecond (10β»ΒΉβ΅ second).
Because the instrumental response time can be comparable to the fluorescence lifetime, measured fluorescence decays are convolutions of the ideal decay with the prompt, or instrumental response, function.
Radiative and non-radiative transitions depopulate M* β fluorescence decays.
β Must-know
Linearly polarized excitation selectively excites molecules whose transition moments align with the polarization, creating an anisotropic initial orientation distribution called photoselection.
After excitation, Brownian rotational motion progressively erases the initial orientational order of the excited molecules.
Further detail
For spherical, freely rotating fluorophores, anisotropy decays exponentially with rotational correlation time r, and rβ equals 2/5 for randomly distributed molecular systems.
Rotational correlation time is related to the radius of a rotating sphere, the Boltzmann factor kBT, and the solvent viscosity Ξ·.
β Must-know
Electrostatic dipoleβdipole interactions between a fluorophore and surrounding solvent molecules lower the potential energies of the energy levels involved in absorption and fluorescence.
In Onsager's solvation model, the ground-state fluorophore dipole moment ΞΌg arranges surrounding solvent dipoles to minimize the system's potential energy, producing a reaction field Rg.
Further detail
After excitation changes the fluorophore dipole moment to ΞΌe in about 10β»ΒΉβ΅ s, the solvent has not yet rearranged, so the reaction field initially remains as it was before excitation.
Solvent relaxation usually takes 10β»ΒΉΒ²β10β»ΒΉβ° s, after which solvent molecules reach a new arrangement around the excited fluorophore.
For badan, the excited-state dipole moment ΞΌe is much larger than the ground-state dipole moment ΞΌg, and increasing solvent-molecule dipole moment produces a stronger red shift.
Ground-state arrangement β excitation before solvent rearrangement β solvent relaxation.
β Must-know
π Static quenching occurs when quencher Q forms a nonfluorescent ground-state complex with fluorophore M, whereas dynamic quenching occurs when Q collides with excited fluorophore M* and changes excited-state decay.
π For dynamic quenching, the steady-state intensity ratio F0/F equals the fluorescence lifetime ratio Ο0/Οq, where Ο0 and Οq are the lifetimes without and with quencher, respectively.
Further detail
In static quenching, the non-radiative rate constant kβ²nr is much larger than the radiative rate constant kr, nearly eliminating emission.
Dynamic quenching yields the SternβVolmer constant KSV, which equals the unquenched fluorescence lifetime multiplied by the diffusion-controlled quenching rate constant kq and has dimension Mβ»ΒΉ.
Dynamic quenching agents include:
The SternβVolmer constant for dynamic quenching is KSV = Ο0kq, where Ο0 is the lifetime without quencher and kq is the diffusion-controlled quenching rate constant.
Static quenching forms a ground-state complex; dynamic quenching requires a collision with M*.
β Must-know
Further detail
The FΓΆrster distance depends on the orientation factor ΞΊΒ², donor fluorescence quantum yield Ξ¦0, Avogadroβs number NA, refractive index n, and spectral-overlap integral J.
The spectral-overlap integral J measures overlap between the normalized donor fluorescence spectrum and the acceptor absorption spectrum scaled to its maximum molar extinction coefficient.
The orientation factor ΞΊΒ² lies between 0 and 4, and is indeterminate when three-dimensional spatial information about the system is unavailable.
FRET efficiency depends only on the actual donorβacceptor distance R and the critical distance R0.
Donor-lifetime measurements quantify FRET without the concentration dependence that affects fluorescence-intensity measurements.
A donor lifetime decrease from 2.5 to 2.0 ns corresponds to a FRET efficiency of 0.2 (20%) and a CFPβYFP distance of 6.3 nm.
FRET is used to monitor interactions and conformational changes in biological macromolecules and to sense biologically important molecules.
Picture donor and acceptor as two dipoles facing across a short gap, with transfer fading sharply as the gap widens.
β Must-know
π Fluorescence lifetimes can be measured by either the pulse method or the phase-modulation method.
Further detail
The measured fluorescence decay is the convolution of the real decay with the instrument response function.
Fluorescence-intensity curves and lifetimes are often determined by nonlinear least-squares fitting.
A biexponential fluorescence-decay model can describe a fluorophore present in two environments, each with its own lifetime and amplitude.
Mode-locked lasers with microchannel-plate photomultipliers can provide a 30 ps instrument-response width and resolve decay times of 10β20 ps.
In phase modulation, sinusoidally modulated excitation produces fluorescence that is delayed in phase and partially demodulated, and the phase difference and modulation ratio are measured.
Phase-modulation measurements can determine picosecond lifetimes at modulation frequencies of 2β10 GHz and lifetimes of 1β10 ns at 2β200 MHz.
Pulse method counts arrival times; phase modulation measures delay and loss of modulation.
β Must-know
π Formula - Photon energy is related to frequency and wavelength by .
Further detail
π A reaction product can be unfavorable thermodynamically but favorable photochemically, or favorable by both thermodynamics and photochemistry.
Heating at 100Β°C supplies 3.1 kJ/mol to the system, whereas irradiation at 550 nm supplies 217 kJ/mol.
After subsequent storage in darkness for 20 s, the photochromic spiropyran sequence shows merocyanine.
Heating favors thermodynamic outcomes; irradiation can favor photochemical outcomes.
β Must-know
π Formula - The photosynthetic machinery is summarized by .
Further detail
β Must-know
π Light absorption requires the photon energy to match the energy difference between the two states and the transition dipole moment to be nonzero.
π Under Kasha's rule, photophysical and photochemical processes start from the lowest excited singlet state, S1 (vβ² = 0).
π Formula - The excited singlet-state lifetime is , and the excited triplet-state lifetime is .
π Formula - The comparative method calculates the sample fluorescence quantum yield as .
Further detail
π Electronic transitions occur without a change in nuclear positions under the FranckβCondon principle.
Absorption takes about 10β»ΒΉβ΅ s, vibrational relaxation 10β»ΒΉΒ²β10β»ΒΉβ° s, fluorescence 10β»ΒΉβ°β10β»β· s, internal conversion 10β»ΒΉΒΉβ10β»βΉ s, intersystem crossing 10β»ΒΉβ°β10β»βΈ s, and phosphorescence 10β»βΆβ0.1 s.
The singlet-to-triplet transition is forbidden but can become slightly allowed through singletβtriplet mixing induced by spinβorbit coupling.
The source states that spinβorbit coupling is proportional to the fourth power of the atomic number, .
π In the optically diluted method, the excitation-wavelength optical density must satisfy to avoid self-quenching.
The fluorescence quantum yield of perylene in cyclohexane at 436 nm is 0.94.
Listed fluorescence quantum-yield standards are:
A. M. Brouwerβs 2011 article in Pure & Applied Chemistry, volume 83, page 2213, is cited as a common reference for emission quantum-yield calculations. - Pure & Appl. Chem.
Ground and excited states differ in geometry, energy, and redox ease.
β Must-know
Further detail
π Formula - For first-order excited-state decay, the population satisfies .
π Formula - The logarithm of fluorescence intensity decreases linearly with time according to , so the slope has magnitude .
π Formula - The fluorescence quantum yield and lifetime determine the fluorescence rate constant through .
β Must-know
π Formula - For dynamic quenching, the SternβVolmer relation is , where is the quenching rate constant and is quencher concentration.
Further detail
π Formula - The quenching rate constant is compared with the diffusion rate constant, estimated by the Debye approximation , with solvent viscosity ; the cited typical value is approximately 5 Γ 10ΒΉβ° Mβ»ΒΉ sβ»ΒΉ.
π If , transfer is rate-limiting; if , diffusion is rate-limiting; and if , transfer does not require the species to approach one another to interact.
π Formula - The free-energy change for photoinduced electron transfer is estimated by the RehmβWeller relation . - D. Rehm, A.Weller, Isr. J. Chem., 1970
P* reacts with Q β emission lifetime and/or quantum yield decreases
β Must-know
π Non-radiative energy transfer occurs before donor emission and requires physical interaction between donor and acceptor; both donor fluorescence quantum yield and lifetime decrease.
Further detail
π Formula - The Dexter energy-transfer rate depends exponentially on donorβacceptor distance according to , where is their separation and is an attenuation factor.
π Formula - FΓΆrster transfer rate varies with donorβacceptor separation as , where is the critical transfer distance and is the donor lifetime without acceptor.
π Formula - The FΓΆrster transfer efficiency is .
π Formula - Transfer efficiency can be obtained from donor measurements as , where the superscript 0 denotes donor measurements without acceptor.
For CFP and YFP, a donor lifetime decrease from 2.5 ns to 2.0 ns corresponds to a transfer efficiency of 0.2 (20%) and a CFPβYFP distance of 6.3 nm.
For triplet excited states, energy transfer occurs mainly by the short-range Dexter mechanism.
The cited distance dependencies are for FΓΆrster transfer and for Dexter transfer; both mechanisms may occur simultaneously. - M. Ward, Coord. Chem. Rev., 2010
Radiative transfer carries a photon; non-radiative transfer requires donorβacceptor interaction
| Feature | Radiative | Non-radiative |
|---|---|---|
| Mechanism | Acceptor captures donor-emitted photons | Donor and acceptor interact before donor emission |
| Distance | Can occur over long distances | Requires physical interaction; FΓΆrster can be long-range |
| Donor emission | Quantum yield decreases; lifetime unchanged | Quantum yield and lifetime decrease |
| Feature | FΓΆrster | Dexter |
|---|---|---|
| Interaction | Dipoleβdipole coupling | Synchronized electron exchange |
| Distance dependence | Proportional to 1/rβΆ | Exponential, e^(βΞ²r) |
| Range | Long-range | Short-range |
Take a 11-question practice quiz on Fluorescence and Energy Transfer, with every answer explained.
1. Across what wavelength range does solar radiation reaching Earth extend?
2. A researcher classifies light at 550 nm by its spectral band. Which classification applies?
Memorize the key concepts of Fluorescence and Energy Transfer with 10 flashcards.
What wavelength range does solar radiation reaching Earth span?
100 nm to 10βΆ nm.
What concept describes electromagnetic radiationβs wave-like and particle-like properties?
Wave-particle duality.
What is a black body?
An idealized object that absorbs all incident electromagnetic radiation and emits a temperature-dependent spectrum.
Upload your class notes and Revizly writes a study guide, a quiz and flashcards in about a minute.
Study guide maker