Muscle Tissue and Skeletal Muscle Anatomy Practice Quiz (41 questions)

All questions and answers

1. Which three categories make up the major types of muscle tissue?

Skeletal, cardiac, and smooth muscle
Skeletal, cardiac, and connective muscle
Skeletal, smooth, and voluntary muscle
Cardiac, smooth, and elastic muscle

Skeletal, cardiac, and smooth muscle

Explanation

The three muscle tissue types are skeletal, cardiac, and smooth. “Connective” is a different tissue category, “voluntary” describes control, and “elastic” is a muscle characteristic.

2. A person consciously contracts a powerful, rapidly acting muscle attached to a bone; it tires easily and has striated fibers. Which muscle type is being used?

Skeletal muscle
Smooth muscle
Cardiac muscle
Hollow-organ muscle

Skeletal muscle

Explanation

Skeletal muscle is consciously controlled, striated, attached to bones and skin, and can contract rapidly and powerfully while tiring easily. Cardiac muscle is involuntary and heart-specific, while smooth muscle is nonstriated and occurs in hollow-organ walls; “hollow-organ muscle” is not a separate tissue type.

3. A biopsy from the heart wall shows striated tissue that is not under conscious control. Which muscle type does it identify?

Skeletal muscle
Hollow-organ muscle
Smooth muscle
Cardiac muscle

Cardiac muscle

Explanation

Cardiac muscle occurs in the heart, forms most of its walls, is striated, and is involuntary. Skeletal muscle is voluntary, smooth muscle is nonstriated, and “hollow-organ muscle” is not a distinct muscle tissue type.

4. A muscle sample from the wall of a urinary bladder contracts without conscious control and lacks visible striations. Which tissue type best fits these findings?

Striated muscle
Cardiac muscle
Smooth muscle
Skeletal muscle

Smooth muscle

Explanation

Smooth muscle is involuntary, nonstriated, and found in walls of hollow organs such as the urinary bladder. Cardiac muscle is striated and heart-specific, while skeletal muscle is voluntary; “striated muscle” contradicts the sample’s lack of striations.

5. A muscle cell uses energy from ATP to produce directed force. Which description best captures this contribution of muscle tissue?

Converts directed mechanical energy into ATP’s chemical energy
Converts stimuli into chemical energy without producing force
Converts ATP’s chemical energy into directed mechanical energy
Converts mechanical energy into heat without producing force

Converts ATP’s chemical energy into directed mechanical energy

Explanation

Muscle tissue can convert chemical energy from ATP into directed mechanical energy capable of exerting force. Reversing the conversion direction, treating stimulus detection as the energy conversion, or omitting force does not match this function.

6. A muscle responds when it receives a stimulus, but the observation does not test whether it shortens. Which characteristic is demonstrated?

Elasticity
Extensibility
Contractility
Excitability

Excitability

Explanation

Excitability is the ability to receive and respond to stimuli. Contractility concerns forceful shortening, extensibility concerns being stretched, and elasticity concerns recoiling to resting length.

7. After stimulation, a muscle produces force by shortening. Which characteristic does this demonstrate?

Extensibility
Elasticity
Contractility
Excitability

Contractility

Explanation

Contractility is the ability to shorten forcibly when stimulated. Excitability is stimulus response, extensibility is stretchability, and elasticity is recoil to resting length.

8. A muscle action both holds a body position and prevents a joint from shifting; as the muscle contracts, what additional listed function can it perform?

Recoil to resting length
Stretch under tension
Generate heat
Receive stimuli

Generate heat

Explanation

Muscles help maintain posture and body position, stabilize joints, and generate heat as they contract. Receiving stimuli, stretching, and recoiling are muscle characteristics rather than the additional function asked about.

9. A dissected skeletal muscle includes muscle tissue, connective-tissue sheaths, bone attachments, and associated nerves and blood vessels. How should the muscle be classified?

A single muscle fiber with several nuclei
An organ composed of different tissues
A tendon connecting muscle to bone
A bundle composed of muscle fibers

An organ composed of different tissues

Explanation

A skeletal muscle is an organ because it includes different tissues as well as nerve and blood supply, connective-tissue sheaths, and attachments. “Muscle tissue alone” omits the organ’s other components; “fascicle” and “tendon” name more limited structures, and a muscle fiber is a cell.

10. A connective-tissue layer is identified as dense and irregular and encloses an entire skeletal muscle. Which sheath is it?

Epimysium
Perimysium
Endomysium
Tendon

Epimysium

Explanation

The epimysium is dense irregular connective tissue surrounding the entire muscle. Perimysium surrounds fascicles, endomysium surrounds individual fibers, and a tendon is an attachment structure.

11. In a muscle specimen, a fibrous connective-tissue sheath encloses a bundle containing several muscle fibers. Which sheath is being observed?

Perimysium
Tendon
Endomysium
Epimysium

Perimysium

Explanation

Perimysium surrounds a fascicle, a group of muscle fibers. Epimysium encloses the entire muscle, endomysium surrounds an individual fiber, and a tendon connects muscle to bone.

12. A muscle spans a joint and attaches at two places: one attachment is on the less movable bone, and the other is on the bone that moves during contraction. What are these attachments, respectively?

Epimysium, then perimysium
Origin, then insertion
Tendon, then endomysium
Insertion, then origin

Origin, then insertion

Explanation

The origin attaches to the immovable or less movable bone, while the insertion attaches to the movable bone. Reversing those terms swaps their roles; epimysium and perimysium are sheaths, while endomysium surrounds a fiber.

13. A researcher identifies the plasma membrane surrounding a skeletal muscle fiber. What is this membrane called?

Sarcoplasm
Glycosome
Sarcolemma
Endomysium

Sarcolemma

Explanation

The sarcolemma is the plasma membrane of a muscle fiber. Sarcoplasm is its cytoplasm, endomysium is connective tissue surrounding the fiber, and glycosomes store glycogen.

14. Which description characterizes a skeletal muscle fiber as a cell?

A short rounded cell with multiple nuclei
A branched cell with multiple nuclei
A long cylindrical cell with multiple nuclei
A long cylindrical cell with one nucleus

A long cylindrical cell with multiple nuclei

Explanation

Skeletal muscle fibers are long, cylindrical cells containing multiple nuclei. A fascicle is a group of fibers, and the single-nucleus and branched-cell descriptions do not match the stated features of a skeletal muscle fiber.

15. A muscle fiber is examined under a microscope and found to contain many densely packed, rodlike structures that occupy about 80% of its volume. What are these structures?

Sarcoplasm
Sarcoplasmic reticulum
Myofibrils
T tubules

Myofibrils

Explanation

Myofibrils are densely packed, rodlike elements that can number in the thousands in one muscle fiber and account for about 80% of its volume. T tubules and sarcoplasmic reticulum are other fiber structures, while sarcoplasm is the cell’s cytoplasm.

16. A student identifies the repeating dark and light bands along a myofibril. Which labels should the student assign to the dark and light regions, respectively?

I band and A band
I band and Z disc
M line and A band
A band and I band

A band and I band

Explanation

The repeating dark regions are A bands, and the lighter regions are I bands. Reversing those labels is the documented confusion; the Z disc and M line are distinct sarcomere landmarks.

17. A researcher marks two successive Z discs along a myofibril. What functional segment lies between the marks?

One A band, including the full I bands on both sides
One I band, including the Z disc and half an A band at each end
One sarcomere, including an A band and half an I band at each end
One myofibril, including a series of Z discs and A bands

One sarcomere, including an A band and half an I band at each end

Explanation

A sarcomere is the smallest functional unit of a myofibril and runs from one Z disc to the next, containing an A band and half of an I band at each end. An A band or I band alone does not define the full Z-disc-to-Z-disc unit.

18. In a sarcomere diagram, a thin filament crosses an I band and continues partway into an A band, while a thick filament spans the A band. Which proteins form the thin and thick filaments, respectively?

Actin and titin
Myosin and actin
Tropomyosin and myosin
Actin and myosin

Actin and myosin

Explanation

Actin forms thin filaments that extend across the I band and partway into the A band, while myosin forms thick filaments along the A band. Reversing actin and myosin confuses their filament types and locations.

19. What polypeptide-chain composition is characteristic of a myosin molecule in a thick myofilament?

Two F-actin strands and four light chains
Four heavy chains and two light chains
Two heavy chains and four light chains
Three heavy chains and three light chains

Two heavy chains and four light chains

Explanation

Each myosin molecule contains two heavy and four light polypeptide chains. Four heavy and two light chains reverses the counts, while F-actin strands are components of thin filaments.

20. During contraction, myosin heads on a thick filament bind to thin filaments. What do these attachments form, and how are the heads arranged along the thick filament?

Cross bridges, with heads aligned at one point
Regulatory complexes, with heads aligned at one point
Cross bridges, with heads staggered at different points
Actin strands, with heads staggered at different points

Cross bridges, with heads staggered at different points

Explanation

During contraction, myosin heads bind thick and thin filaments to form cross bridges, and their staggered arrangement places heads at different points along the thick filament. A single aligned row does not reflect this staggered organization.

21. Which combination correctly describes the structure of a thin myofilament?

Two twisted G-actin strands made of linked F-actin, with tropomyosin and troponin
Two twisted myosin strands made of linked heavy chains, with tropomyosin and troponin
Two twisted F-actin strands made of linked G-actin, with tropomyosin and troponin
Two twisted F-actin strands made of linked G-actin, without regulatory proteins

Two twisted F-actin strands made of linked G-actin, with tropomyosin and troponin

Explanation

A thin filament has two twisted F-actin strands, each built from linked globular G-actin subunits, along with tropomyosin and troponin. Myosin chains belong to thick filaments, and leaving out the regulatory proteins or reversing G-actin and F-actin misstates the thin-filament structure.

22. Which structure forms a tubule network around each myofibril and stores and releases calcium ions to regulate intracellular calcium levels?

The T tubule
The cross-bridge system
The sarcoplasmic reticulum
The sarcolemma

The sarcoplasmic reticulum

Explanation

The sarcoplasmic reticulum surrounds each myofibril and regulates intracellular calcium by storing and releasing calcium ions. The sarcolemma is the muscle-fiber membrane, T tubules are sarcolemma extensions, and cross bridges generate force.

23. An electrical signal must reach deep inside a muscle fiber. Which structure, formed as an inward extension of the cell membrane, provides this route?

The sarcolemma
A mitochondrion
The sarcoplasmic reticulum
A T tubule

A T tubule

Explanation

A T tubule is formed by a sarcolemma protrusion deep into the muscle fiber, allowing electrical transmissions to reach its interior. The sarcoplasmic reticulum is a calcium-regulating network, the sarcolemma is the membrane, and mitochondria are not the described signal route.

24. In the sliding-filament model, what does the term “contraction” describe?

Sliding of thin filaments past thick filaments
Shortening of the muscle fiber
Inactivation of cross bridges
Activation of cross bridges to generate force

Activation of cross bridges to generate force

Explanation

Contraction is defined as activation of cross bridges to generate force. Shortening is a possible result of force overcoming opposing forces, sliding describes filament movement, and cross-bridge inactivation ends contraction.

25. During a sarcomere contraction, measurements show that actin and myosin overlap more than before. What happened to the thin and thick filaments themselves?

Both filaments shortened as overlap increased
Thick filaments lengthened while thin filaments stayed the same length
Thin filaments lengthened while thick filaments stayed the same length
Neither filament changed length; they slid past one another

Neither filament changed length; they slid past one another

Explanation

During contraction, thin filaments slide past thick filaments, increasing actin–myosin overlap without changing either filament’s length. The alternatives mistake increased overlap for a change in one or both filament lengths.

26. A myosin head has attached to actin and completed its pivoting pull. Which sequence correctly describes the next two cross-bridge events?

ATP binds and detaches myosin; ATP hydrolysis re-energizes the head
ATP hydrolysis detaches myosin; ATP binding re-energizes the head
ADP binds and detaches myosin; ATP hydrolysis re-energizes the head
ATP binds and re-energizes myosin; hydrolysis detaches the head

ATP binds and detaches myosin; ATP hydrolysis re-energizes the head

Explanation

ATP binding causes myosin to detach from actin, and hydrolysis then returns the head to its high-energy position. The hydrolysis-first choice reverses the steps, the ADP choice assigns detachment to the wrong molecule, and the final choice swaps detachment and re-energizing.

27. In a muscle fiber, ATP remains available, but Ca2+ is no longer bound to troponin. What happens to cross-bridge cycling?

The cycle continues because Ca2+ is required only to begin attachment
The cycle stops because both ATP and troponin-bound Ca2+ are required
The cycle stops because Ca2+ must bind directly to myosin
The cycle continues because ATP alone supplies the required condition

The cycle stops because both ATP and troponin-bound Ca2+ are required

Explanation

Cross-bridge cycling continues only when ATP is available and Ca2+ is bound to troponin, so loss of either condition stops the cycle. ATP alone omits the calcium requirement, direct calcium binding to myosin confuses the binding target, and limiting calcium's role to initial attachment misstates the ongoing requirement.

28. A skeletal muscle fiber receives nerve stimulation and generates an action potential, but the electrical signal does not travel along the sarcolemma and intracellular Ca2+ does not rise. Which conclusion follows?

Contraction requirements are met because nerve stimulation and action-potential generation suffice
Contraction requirements are incomplete because only a second nerve stimulus is needed
Contraction requirements are met because Ca2+ rises without signal propagation
Contraction requirements are incomplete because propagation and a brief Ca2+ rise are also needed

Contraction requirements are incomplete because propagation and a brief Ca2+ rise are also needed

Explanation

Skeletal muscle contraction requires all four events, including action-potential propagation along the sarcolemma and a brief rise in intracellular Ca2+. Treating the first two events as sufficient omits required steps, while a second nerve stimulus or an assumed calcium rise does not address the stated missing events.

29. An investigator distinguishes events at the neuromuscular junction from events that link electrical activity to contraction. Which pair belongs to excitation-contraction coupling?

Nerve stimulation and action-potential generation at the neuromuscular junction
Nerve stimulation and action-potential propagation along the sarcolemma
Action-potential propagation along the sarcolemma and the intracellular Ca2+ rise
Action-potential generation and the intracellular Ca2+ rise

Action-potential propagation along the sarcolemma and the intracellular Ca2+ rise

Explanation

Excitation-contraction coupling comprises action-potential propagation along the sarcolemma and the intracellular Ca2+ rise, linking electrical signals to contraction. Nerve stimulation and action-potential generation occur at the neuromuscular junction; the mixed pairs each combine events from different stages.

30. Which three structures make up the neuromuscular junction?

Axon terminals, synaptic cleft, and junctional folds
Axon terminals, sarcoplasm, and synaptic vesicles
Synaptic vesicles, sarcolemma, and motor neuron branches
Motor neuron cell body, synaptic cleft, and receptors

Axon terminals, synaptic cleft, and junctional folds

Explanation

The neuromuscular junction comprises the axon terminals, the synaptic cleft, and the muscle fiber's junctional folds. Sarcoplasm and synaptic vesicles are related structures, but they are not the three defining components.

31. A motor-neuron axon branches as it enters a muscle. Which arrangement of neuromuscular junctions is expected for its muscle fibers?

Each muscle fiber has several junctions with several motor neurons
Each muscle fiber has one junction with one motor neuron
Each motor neuron connects to one fiber through several junctions
One junction serves all fibers supplied by the branching axon

Each muscle fiber has one junction with one motor neuron

Explanation

Axons branch within a muscle, but each individual muscle fiber has one neuromuscular junction with one motor neuron. The branching pattern does not mean multiple junctions occur on each fiber or that a single junction serves the whole muscle.

32. A nerve impulse reaches a motor-neuron terminal, and acetylcholine binds receptors on a muscle fiber. Which sequence produces the local end plate potential?

Calcium entry triggers ACh release; receptor channels pass Na+ in and K+ out, with greater Na+ influx
Calcium entry triggers ACh release; voltage-gated Na+ channels create the end plate potential before ACh binds
ACh binds receptors; calcium enters the muscle fiber and potassium leaves, producing the end plate potential
ACh release triggers calcium entry; receptor channels pass K+ in and Na+ out, with greater K+ influx

Calcium entry triggers ACh release; receptor channels pass Na+ in and K+ out, with greater Na+ influx

Explanation

The impulse opens voltage-gated calcium channels in the axon terminal, and calcium entry triggers ACh exocytosis. ACh receptor channels then allow Na+ into the muscle and K+ out; the greater Na+ influx causes the local end plate potential.

33. At a muscle fiber's neuromuscular junction, the end plate potential reaches threshold. What event follows to initiate a muscle-fiber action potential?

Acetylcholinesterase opens channels in the synaptic cleft
ACh receptors open and release more acetylcholine
Voltage-gated Ca2+ channels open in the muscle fiber
Voltage-gated Na+ channels open in the sarcolemma

Voltage-gated Na+ channels open in the sarcolemma

Explanation

When the end plate potential reaches threshold, voltage-gated Na+ channels open and initiate an action potential in the sarcolemma. ACh receptor channels act earlier to generate the end plate potential.

34. After acetylcholine has activated receptors at a neuromuscular junction, which combination helps terminate its effects?

ACh remains intact while receptors bind it more strongly
Calcium breaks ACh down, and sodium diffuses away from the junction
Acetylcholine breaks the enzyme down, and receptors diffuse away from the junction
Acetylcholinesterase breaks ACh down, and ACh diffuses away from the junction

Acetylcholinesterase breaks ACh down, and ACh diffuses away from the junction

Explanation

Acetylcholinesterase breaks down acetylcholine in the synaptic cleft, while some ACh also diffuses away; these processes terminate its effects. Receptor binding is part of transmission, not the process that clears the transmitter.

35. A patient has antibodies attacking acetylcholine receptors, leaving too few receptors at neuromuscular junctions. Which condition and disease mechanism does this indicate?

ACh deficiency caused by antibodies attacking acetylcholinesterase
Excessive ACh breakdown caused by antibodies attacking calcium channels
Myasthenia gravis caused by an autoimmune attack on receptors
Myasthenia gravis caused by a shortage of acetylcholine release

Myasthenia gravis caused by an autoimmune attack on receptors

Explanation

Myasthenia gravis involves a shortage of acetylcholine receptors because the person's own antibodies attack them, indicating an autoimmune disease. A shortage of ACh release or an attack on acetylcholinesterase describes a different mechanism.

36. Which sequence gives the three stages of a sarcolemma action potential in order?

End plate potential, calcium release, repolarization
End plate potential, depolarization, repolarization
End plate potential, repolarization, depolarization
Depolarization, end plate potential, repolarization

End plate potential, depolarization, repolarization

Explanation

The action potential proceeds through the end plate potential, depolarization, and repolarization. Putting depolarization first confuses the threshold-triggered stage with the preceding end plate potential, while reversing the last two stages gives the wrong order.

37. At a motor end plate, acetylcholine opens chemically gated channels. Which local ion movement makes the sarcolemma less negative inside?

Sodium leaves more than potassium enters
Potassium leaves more than sodium enters
Sodium enters more than potassium leaves
Potassium enters more than sodium leaves

Sodium enters more than potassium leaves

Explanation

Chemically gated channels allow sodium to enter and some potassium to leave; the greater sodium influx makes the local membrane less negative. Potassium entry reverses its movement, and sodium exit reverses the principal ion movement.

38. An end plate potential reaches threshold in a muscle fiber. What event triggers the action potential and helps it spread to adjacent sarcolemma regions?

Voltage-gated sodium channels close, and potassium influx depolarizes adjacent regions
Voltage-gated sodium channels open, and sodium influx depolarizes adjacent regions
Chemically gated sodium channels open, and sodium influx repolarizes adjacent regions
Voltage-gated potassium channels open, and potassium efflux depolarizes adjacent regions

Voltage-gated sodium channels open, and sodium influx depolarizes adjacent regions

Explanation

Reaching threshold opens voltage-gated sodium channels, causing a large sodium influx; depolarization of neighboring regions propagates the action potential. Potassium efflux is associated with repolarization, while chemically gated channels mediate the earlier end plate potential.

39. What does excitation-contraction coupling link in a muscle fiber?

An action potential along the sarcolemma and myofilament sliding
Myosin detachment from actin and return to the resting state
Calcium storage in the reticulum and restoration of resting voltage
Acetylcholine release at the motor neuron and neurotransmitter breakdown

An action potential along the sarcolemma and myofilament sliding

Explanation

Excitation-contraction coupling is the sequence linking an action potential along the sarcolemma to the sliding of myofilaments. Acetylcholine release is part of neuromuscular transmission, whereas calcium storage and myosin detachment concern relaxation-related events.

40. A muscle action potential reaches the T tubules. Which sequence directly causes calcium to enter the cytosol?

T-tubule voltage-sensitive proteins change shape and open terminal-cistern calcium channels
Troponin changes shape and opens calcium channels in the sarcolemma
T-tubule voltage-sensitive proteins pump calcium into the reticulum
Terminal-cistern proteins change shape and open T-tubule sodium channels

T-tubule voltage-sensitive proteins change shape and open terminal-cistern calcium channels

Explanation

The action potential travels down the T tubules, causing voltage-sensitive proteins to change shape and open calcium-release channels in the SR terminal cisterns. Calcium is released into the cytosol; pumping it into the reticulum is part of the return toward relaxation.

41. Calcium enters a muscle fiber's cytosol during contraction. What happens next to expose myosin-binding sites on actin?

Calcium binds actin, which shifts myosin away from the sites
Calcium binds troponin, which shifts tropomyosin away from the sites
Calcium binds tropomyosin, which shifts troponin over the sites
Calcium binds myosin, which shifts actin away from the sites

Calcium binds troponin, which shifts tropomyosin away from the sites

Explanation

Calcium binding changes troponin's shape, moving tropomyosin's blocking action and exposing myosin-binding sites on actin. Tropomyosin is the blocker, while cross-bridges form after myosin can bind to the exposed sites.

Study with flashcards

Lock in the answers with 91 flashcards on Muscle Tissue and Skeletal Muscle Anatomy.

What are the three types of muscle tissue?

Skeletal, cardiac, and smooth muscle.

Is skeletal muscle voluntary or involuntary?

Voluntary.

How are skeletal muscle fibers described by length?

They are the longest muscle fibers.

See the flashcards →

Read the study guide

Go over the full study guide for Muscle Tissue and Skeletal Muscle Anatomy.

Read the study guide →

Related classes

Make your own practice quizzes

Upload your class notes and Revizly writes a practice quiz with explained answers in about a minute.

Quiz maker