Alkene Oxidation and Epoxide Chemistry Practice Quiz (14 questions)

All questions and answers

1. Two alkene samples are oxidized separately: one reacts with triplet oxygen and the other with singlet oxygen in a photosensitized ene-type reaction. Which comparison is correct?

Both triplet- and singlet-oxygen reactions are concerted
Both triplet- and singlet-oxygen reactions are non-concerted
Singlet-oxygen ene-type oxidation is non-concerted, unlike triplet-oxygen autoxidation
Triplet-oxygen autoxidation is non-concerted, unlike the singlet-oxygen ene-type reaction

Triplet-oxygen autoxidation is non-concerted, unlike the singlet-oxygen ene-type reaction

Explanation

Alkene autoxidation with triplet oxygen is non-concerted, whereas the singlet-oxygen ene-type reaction is distinguished from it as a concerted process. Reversing the pathways or assigning the same mechanism to both misses that distinction.

2. A trisubstituted alkene is treated with selenium dioxide. Which site is expected to undergo allylic oxidation?

Both allylic sides to the same extent
The allylic position on the less substituted side
The allylic position on the more substituted side
The more substituted carbon of the double bond

The allylic position on the less substituted side

Explanation

Selenium dioxide oxidizes allylic positions, and for trisubstituted alkenes the oxidation occurs on the less substituted side. Choosing the more substituted side reverses the stated regioselectivity, while the double-bond carbon is not the target described.

3. A chemist needs to oxidize a phenol while choosing a reagent specifically identified for this transformation. Which reagent should be selected?

mCPBA
Selenium dioxide
Fremy's salt
NBS with AIBN

Fremy's salt

Explanation

Fremy's salt is identified as the reagent used to oxidize phenols. mCPBA is listed for sulfur oxidation, selenium dioxide targets allylic positions, and NBS with AIBN is associated with allylic or benzylic oxidation.

4. A sulfur-containing compound is first converted to a sulfoxide, and the chemist wants to continue oxidation to the higher oxidation state. Which outcome and reagent set fit this transformation?

A nitro compound, using H₂O₂, mCPBA, or NaIO₄
A sulfone, using Fremy's salt, NBS, or AIBN
A sulfoxide, using H₂O₂, mCPBA, or NaIO₄
A sulfone, using H₂O₂, mCPBA, or NaIO₄

A sulfone, using H₂O₂, mCPBA, or NaIO₄

Explanation

Sulfur can be oxidized with H₂O₂, mCPBA, or NaIO₄, and a sulfoxide can be further oxidized to a sulfone. Fremy's salt and NBS/AIBN are not the listed sulfur reagents, while a nitro compound is a nitrogen oxidation product.

5. A chemist wants to epoxidize an allylic alcohol asymmetrically using the Sharpless method. Which reagent combination should be selected?

Mn(III)–salen, NaOCl, and CH₂Cl₂
K₂OsO₂(OH)₄, K₃Fe(CN)₆, and a cinchona ligand
NBS, water, and an alkene
Ti(Oi-Pr)₄, TBHP, CH₂Cl₂, and a chiral tartrate ligand

Ti(Oi-Pr)₄, TBHP, CH₂Cl₂, and a chiral tartrate ligand

Explanation

Sharpless asymmetric epoxidation of allylic alcohols uses Ti(Oi-Pr)₄, TBHP or a peracid, CH₂Cl₂, and a chiral tartrate ligand. Mn(III)–salen with NaOCl identifies the Jacobsen method, while the osmium and NBS systems are not Sharpless epoxidation conditions.

6. A reaction plan calls for Jacobsen asymmetric epoxidation of an alkene. Which catalyst and oxidant system fits that method?

Dimethyl dioxirane in place of a metal catalyst
K₂OsO₂(OH)₄ with a cinchona alkaloid ligand
Mn(III)–salen complex with NaOCl in CH₂Cl₂
Ti(Oi-Pr)₄ with TBHP and a chiral tartrate ligand

Mn(III)–salen complex with NaOCl in CH₂Cl₂

Explanation

Jacobsen asymmetric epoxidation uses a Mn(III)–salen complex and NaOCl in CH₂Cl₂. Ti(Oi-Pr)₄ with tartrate is associated with Sharpless epoxidation, and cinchona ligands are used for asymmetric dihydroxylation.

7. A stereospecific epoxidation is performed on an E alkene. What relative stereochemistry should the epoxide have?

A vicinal diol with syn hydroxyl groups
A trans epoxide
A racemic pair with no defined relationship
A cis epoxide

A trans epoxide

Explanation

Alkene epoxidation is stereospecific: an E alkene gives a trans epoxide, whereas a Z alkene gives a cis epoxide. A cis epoxide assigns the Z outcome to the E starting material, while a vicinal diol is a different product class.

8. A laboratory protocol specifies AD-mix β for Sharpless asymmetric syn dihydroxylation. Which chiral ligand should be used?

DHQD₂PHAL
A Mn(III)–salen complex
DHQ₂PHAL
A chiral tartrate ligand

DHQD₂PHAL

Explanation

AD-mix β uses DHQD₂PHAL, while DHQ₂PHAL is used in AD-mix α. A tartrate ligand is associated with Sharpless asymmetric epoxidation, and Mn(III)–salen is used in Jacobsen epoxidation.

9. An alkoxide nucleophile is added to an epoxide under ring-opening conditions. What key bond change should occur?

A carbon–oxygen bond in the epoxide ring is broken as the nucleophile attacks
The epoxide rearranges into a carbonyl without nucleophilic attack
The alkene is converted into an epoxide by oxygen transfer
The epoxide is reduced by hydride to form an alcohol

A carbon–oxygen bond in the epoxide ring is broken as the nucleophile attacks

Explanation

Nucleophilic attack opens an epoxide ring by breaking a carbon–oxygen bond as the nucleophile forms a new bond to carbon. Carbonyl rearrangement is promoted by BF₃, hydride causes reductive ring opening, and oxygen transfer to an alkene forms an epoxide rather than opening one.

10. A substituted epoxide is opened once under acidic conditions and once under basic conditions. Which regioselectivity comparison is expected?

Both conditions favor attack at the more substituted site
Both conditions favor attack at the less substituted site
Acidic conditions favor attack at the less substituted site; basic conditions favor the more substituted site
Acidic conditions favor attack at the more substituted site; basic conditions favor the less substituted site

Acidic conditions favor attack at the more substituted site; basic conditions favor the less substituted site

Explanation

Acidic epoxide opening gives the more substituted product, whereas basic opening gives the less substituted product. The reversed pattern swaps the two conditions, and the other choices incorrectly give both conditions the same regioselectivity.

11. A chemist treats an alkene with I₂ and silver benzoate, PhCO₂Ag, under Prevost conditions. What type of dihydroxylation is expected?

Syn dihydroxylation
Oxidative cleavage
Anti dihydroxylation
Epoxidation

Anti dihydroxylation

Explanation

The Prevost reaction uses I₂ and silver benzoate to achieve anti dihydroxylation. Syn dihydroxylation is associated with the Woodward modification in the presence of water; epoxidation and oxidative cleavage are different transformations.

12. During ozonolysis, an alkene first forms an ozonide. Which sequence best describes how this intermediate forms and can proceed before work-up?

A retro-cycloaddition forms it, and 1,3-dipolar cycloaddition may follow
A 1,3-dipolar cycloaddition forms it, and retro-cycloaddition may follow
A nucleophilic substitution forms it, and elimination may follow
A direct oxidative cleavage forms it, and reduction completes the sequence

A 1,3-dipolar cycloaddition forms it, and retro-cycloaddition may follow

Explanation

Ozonide formation proceeds by 1,3-dipolar cycloaddition, and the ozonide can undergo retro-cycloaddition before oxidative or reductive work-up. Direct cleavage misidentifies its formation, while the reversed sequence swaps the two cycloaddition steps.

13. A laboratory uses KMnO₄ to oxidatively cleave an alkyne. What type of products does this cleavage produce?

Epoxides
Aldehydes
Carboxylic acids
Vicinal diols

Carboxylic acids

Explanation

KMnO₄ can oxidatively cleave alkynes to carboxylic acids. Aldehydes are not the stated alkyne cleavage products, and vicinal diols and epoxides result from different alkene oxidation reactions.

14. A reaction protocol calls for catalytic OsO₄ and sodium periodate to oxidize an alkene. Which oxidation is being used?

Lemieux–Johnson oxidation
Prevost reaction
Woodward modification
KMnO₄ oxidative cleavage

Lemieux–Johnson oxidation

Explanation

Lemieux–Johnson oxidation uses catalytic OsO₄ with NaIO₄, which is sodium periodate. Prevost and Woodward reactions use I₂ and silver benzoate, while KMnO₄ cleavage uses a different oxidant.

Study with flashcards

Lock in the answers with 38 flashcards on Alkene Oxidation and Epoxide Chemistry.

How does triplet-oxygen alkene autoxidation differ mechanistically from singlet-oxygen ene-type photooxidation?

It is non-concerted.

Which positions does selenium dioxide oxidize in alkenes?

Allylic positions.

In trisubstituted alkenes, which side is oxidized by selenium dioxide?

The less substituted side.

See the flashcards →

Read the study guide

Go over the full study guide for Alkene Oxidation and Epoxide Chemistry.

Read the study guide →

Related classes

Make your own practice quizzes

Upload your class notes and Revizly writes a practice quiz with explained answers in about a minute.

Quiz maker