Design and Technology Fundamentals Practice Quiz (14 questions)

All questions and answers

1. A student is working in a design workshop. What is the purpose of health and safety rules?

To keep people safe in the workshop
To review what went well in a design
To identify materials for a product
To list what a product must include

To keep people safe in the workshop

Explanation

Health and safety refers to rules intended to keep people safe in the workshop. Product specifications describe requirements, evaluation reviews work, and research can identify materials.

2. After completing research and writing a specification, a student is ready to begin rough drawings of different possible solutions. What stage should come next?

Prototype
Initial ideas
Development
Final design

Initial ideas

Explanation

The process moves from the specification to initial ideas, which are rough drawings of different possibilities. Development improves ideas, a prototype tests an idea, and the final design is the improved choice for making.

3. A panel is produced by gluing wood fibres or small pieces together; which material category describes it?

Hardwood
Pine
Layered timber
Manufactured board

Manufactured board

Explanation

Manufactured board is made from pieces or fibres of wood glued together, with MDF and plywood as examples. Hardwood is wood from deciduous trees, pine is a softwood species, and a layered description does not capture the broader category definition.

4. A school compares wind power with coal as energy sources for manufacturing. Which classification fits them, respectively?

Non-renewable, then non-renewable
Renewable, then non-renewable
Non-renewable, then renewable
Renewable, then renewable

Renewable, then non-renewable

Explanation

Renewable resources can grow back, while non-renewable resources will run out; wind is listed as renewable and coal as non-renewable. Reversing the categories misclassifies each, and energy use does not make both resources renewable or non-renewable.

5. Before using a workshop machine, a student identifies what could go wrong and plans how to prevent it. What process are they carrying out?

A design evaluation
A safety rule
A risk assessment
A hazard check

A risk assessment

Explanation

A risk assessment considers what might go wrong and how to prevent it. Identifying a dangerous thing is hazard identification, while a safety rule is a precaution and evaluation reviews completed work.

6. A student is planning a desk organiser and records that it must hold six pens and fit inside a particular drawer. What part of the design process is this record?

A prototype for checking whether the idea works
A specification of required product features
Research about materials and existing products
A design brief identifying the product and its user

A specification of required product features

Explanation

A specification lists what a product must include or be able to do, such as holding six pens and fitting a drawer. A brief introduces the design need and user, research gathers information, and a prototype tests an idea.

7. A designer is choosing between two sketches: one shows a flat object with height and width, while the other also represents its depth. How should the sketches be classified?

The first is 3D and the second is 2D
The first is orthographic and the second is perspective
The first is perspective and the second is isometric
The first is 2D and the second is 3D

The first is 2D and the second is 3D

Explanation

A 2D drawing shows height and width, while a 3D drawing shows height, width, and depth. Reversing the labels confuses these dimensional distinctions; perspective and orthographic describe other drawing characteristics.

8. A student is removing small amounts of wood to form a joint. Which tool combination should the student use?

A vice and a steel rule
A coping saw and a chisel
A chisel and a wooden mallet
A tenon saw and a wooden mallet

A chisel and a wooden mallet

Explanation

A chisel removes wood for joints, and a wooden mallet is used with a chisel. A saw is for cutting, a vice holds wood still, and a steel rule measures.

9. A woodworker needs to make a straight cut in a wooden strip. Which saw is suited to this task?

A tenon saw
A coping saw
A chisel
A steel rule

A tenon saw

Explanation

A tenon saw is used for straight cuts in wood; a coping saw is for curves and shapes, a steel rule measures, and a chisel removes wood for joints.

10. A designer creates a product model on a computer, then uses workshop machinery to make it. Which terms describe these two stages, in order?

CAM, then sustainability
CAM, then CAD
CAD, then CAM
CAD, then sustainability

CAD, then CAM

Explanation

CAD is designing on a computer, whereas CAM uses machines to make a design. Reversing the terms confuses their roles; sustainability concerns making products without harming the planet.

11. A school needs a student to design a storage item for younger pupils. Which project statement would be a design brief?

A short statement describing what to design and who it is for
A list of features the finished product must include
Information gathered about materials and existing products
The improved design selected for making

A short statement describing what to design and who it is for

Explanation

A design brief briefly states what needs to be designed and who the intended user is. A feature list is a specification, gathered information is research, and the selected outcome is the final design.

12. A design team changes its product-making approach to avoid harming the planet. Which goal are they pursuing?

Renewability
Recycling
Workshop safety
Sustainability

Sustainability

Explanation

Sustainability means making products without harming the planet. Recycling and using renewable resources can be related approaches, but neither alone is the full definition; workshop safety concerns people in the workplace.

13. A furniture maker wants wood from an evergreen tree that is cheaper and grows faster than hardwood. Which material category fits these requirements?

Hardwood
Deciduous timber
Softwood
Manufactured board

Softwood

Explanation

Softwood comes from evergreen trees and is cheaper and faster-growing, whereas hardwood comes from deciduous trees and is strong and expensive. Hardwood reverses those traits, and manufactured board is made by gluing pieces or fibres together.

14. A workshop drawing presents separate top, front, and side views of an object. What type of drawing is it?

An orthographic drawing
A perspective drawing
An isometric drawing
A 2D drawing

An orthographic drawing

Explanation

An orthographic drawing shows top, front, and side views. Isometric drawings represent 3D form with sides at 30° angles, perspective drawings show objects getting smaller in the distance, and 2D drawings show height and width.

Study with flashcards

Lock in the answers with 44 flashcards on Design and Technology Fundamentals.

What does a design brief explain?

What needs to be designed and who it is for.

Who is a design brief intended to identify?

The person the design is for.

What does a product specification list?

What a product must include or be able to do.

See the flashcards →

Read the study guide

Go over the full study guide for Design and Technology Fundamentals.

Read the study guide →

Related classes

Make your own practice quizzes

Upload your class notes and Revizly writes a practice quiz with explained answers in about a minute.

Quiz maker