Differential Calculus and Extrema Practice Quiz (31 questions)

All questions and answers

1. At a glacier depth of 2 feet and time 30 days, which expression gives the modeled temperature?

T0+T1e−2ωsin⁡(30λ−2μ)T_0+T_1e^{-2\omega}\sin(30\lambda-2\mu)
T0+T1sin⁡(30λ−2μ)T_0+T_1\sin(30\lambda-2\mu)
T0+T1e−2ωsin⁡(30λ)T_0+T_1e^{-2\omega}\sin(30\lambda)
T0+T1e−2ωsin⁡(2λ−30μ)T_0+T_1e^{-2\omega}\sin(2\lambda-30\mu)

$$T_0+T_1e^{-2\omega}\sin(30\lambda-2\mu)$$

Explanation

The model attenuates the oscillation by e−ωxe^{-\omega x} and uses the phase λt−μx\lambda t-\mu x; substituting x=2x=2 and t=30t=30 gives the stated expression. Omitting the exponential removes depth attenuation, swapping the variables changes the phase, and dropping μx\mu x ignores the depth-dependent phase shift.

2. For one mole of an ideal gas with temperature TT and volume VV, which expression gives pressure as a function of those variables?

P=RVTP=\frac{RV}{T}
P=RTVP=RTV
P=TVP=\frac{T}{V}
P=RTVP=\frac{RT}{V}

$$P=\frac{RT}{V}$$

Explanation

For one mole of ideal gas, pressure is given by P=RTVP=\frac{RT}{V}, with RR the ideal-gas constant. Swapping temperature and volume inverts their roles, multiplying by volume changes the relationship, and omitting RR drops the required constant.

3. A model assigns a velocity vector to every point in a region of space. What kind of field does it define?

A scalar field
A scalar function
A vector field
A constant vector

A vector field

Explanation

A vector field assigns a vector in R3\mathbb{R}^3 to each point in its domain. A scalar field assigns real numbers, a constant vector is a single vector rather than a pointwise assignment, and a scalar function of vectors reverses the roles of input and output.

4. A researcher studies the gradient–curl–divergence sequence on the interior of a cube. What conclusion about exactness is appropriate?

The sequence is exact because the domain has no holes
The sequence fails to be exact because the domain is bounded
The sequence is exact only if its boundary is removed
Exactness cannot be inferred unless the domain is all of space

The sequence is exact because the domain has no holes

Explanation

The interior of a cube is an example of an open set without holes, where the operator sequence is exact. Boundedness does not create a hole, and exactness is a stronger domain property than the fact that successive compositions vanish.

5. A researcher uses the glacier model for a one-year oscillation, with time measured in days. Which value should be assigned to the temporal frequency parameter λ\lambda?

365365
2π365\frac{2\pi}{365}
ω\omega
1365\frac{1}{365}

$$\frac{2\pi}{365}$$

Explanation

A one-year cycle has period 365 days, so its angular frequency is λ=2π365\lambda=\frac{2\pi}{365}. The value 1365\frac{1}{365} omits the angular factor, 365 is the period rather than the frequency, and ω\omega is a different model parameter.

6. A scalar function is defined on a region, and a vector field at every point equals the gradient of that function. How is the vector field classified?

A field derived from a scalar potential
A field specified by its divergence
A field derived from a vector curl
A field derived from a vector potential

A field derived from a scalar potential

Explanation

A vector field is derived from a scalar potential when it equals the gradient of a scalar field. A vector potential instead gives a field through its curl, while divergence alone does not define this classification.

7. An engineer compares feasible tension-frequency settings to select the machine's optimal operating point. What criterion should guide the selection?

Choose the admissible setting that maximizes the yield function
Optimize each input separately without comparing their resulting yields
Choose the admissible setting with the lowest tension
Choose the admissible setting that minimizes the yield function

Choose the admissible setting that maximizes the yield function

Explanation

The optimal operating point is found by maximizing the yield function over admissible tension and frequency values. Minimizing yield reverses the objective, separate input choices may not maximize the combined function, and lowest tension is not the stated optimization criterion.

8. For F(x,y,z)=(yz,xz,xy)\mathbf{F}(x,y,z)=(yz,xz,xy), which expression gives rot⁡F\operatorname{rot}\mathbf{F}?

(yz,xz,xy)(yz,xz,xy)
(x−y,y−z,z−x)(x-y,y-z,z-x)
x+y+zx+y+z
(0,0,0)(0,0,0)

$$(0,0,0)$$

Explanation

The curl components are (∂Fz∂y−∂Fy∂z,∂Fx∂z−∂Fz∂x,∂Fy∂x−∂Fx∂y)\left(\frac{\partial F_z}{\partial y}-\frac{\partial F_y}{\partial z},\frac{\partial F_x}{\partial z}-\frac{\partial F_z}{\partial x},\frac{\partial F_y}{\partial x}-\frac{\partial F_x}{\partial y}\right). For this field, each pair of derivatives is equal, so the result is zero; x+y+zx+y+z confuses curl with divergence, the nonzero tuple reflects derivative or sign errors, and the original field is not obtained by applying curl.

9. A function has value 12 at a point, and every value within a small neighborhood is at least 12, although values elsewhere in its domain can be smaller. What kind of minimum does the point represent?

A global maximum
A local maximum
A global minimum
A local minimum

A local minimum

Explanation

A local minimum compares the function’s value with values in a neighborhood, so the smaller values elsewhere do not rule it out. A global minimum requires comparison throughout the domain; a maximum reverses the inequality.

10. Suppose ff and gg are of class CkC^k on suitable domains, and gg is nowhere zero. Which regularity conclusion applies to f/gf/g on its domain?

It is guaranteed to be continuous but not of class CkC^k
It remains of class CkC^k
It remains of class CkC^k only where ff is nonzero
It is guaranteed to be of class Ck+1C^{k+1}

It remains of class $$C^k$$

Explanation

Quotients of class CkC^k functions remain class CkC^k where the denominator is nowhere zero. The nonzero condition concerns the denominator, not the numerator, and the rule does not guarantee an extra derivative.

11. To approximate the torus altitude near a critical point to second order, which information is used to construct the Taylor polynomial?

The altitude value and gradient at that point
The altitude value and Hessian at that point
The gradient and Hessian at that point
The altitude value and third derivatives at that point

The altitude value and Hessian at that point

Explanation

The second-order Taylor polynomial at a critical point is formed from the function value and its Hessian there. The gradient alone does not supply the second-order terms, and third derivatives belong to higher-order approximations.

12. For f(x,y)=x2+3yf(x,y)=x^2+3y, which limit gives the partial derivative with respect to yy at (1,2)(1,2)?

lim⁡h→0f(1,2)−f(1,2+h)h\lim_{h\to 0}\frac{f(1,2)-f(1,2+h)}{h}
lim⁡h→0f(1+h,2)−f(1,2)h\lim_{h\to 0}\frac{f(1+h,2)-f(1,2)}{h}
lim⁡(h,k)→(0,0)f(1+h,2+k)−f(1,2)h+k\lim_{(h,k)\to(0,0)}\frac{f(1+h,2+k)-f(1,2)}{h+k}
lim⁡h→0f(1,2+h)−f(1,2)h\lim_{h\to 0}\frac{f(1,2+h)-f(1,2)}{h}

$$\lim_{h\to 0}\frac{f(1,2+h)-f(1,2)}{h}$$

Explanation

The partial derivative with respect to yy varies the second input while holding the first fixed, as in the first limit. Varying xx targets the other partial, a two-variable increment is not the stated partial-derivative quotient, and reversing the numerator changes the sign.

13. Near a measured operating point, a model depends on variables xx and yy, whose small changes are Δx\Delta x and Δy\Delta y. Which expression gives the differential estimate of the function's change?

Δf≈(∂f∂x∂f∂y)(Δx+Δy)\Delta f\approx\left(\frac{\partial f}{\partial x}\frac{\partial f}{\partial y}\right)(\Delta x+\Delta y)
Δf≈∂2f∂x2Δx+∂2f∂y2Δy\Delta f\approx\frac{\partial^2 f}{\partial x^2}\Delta x+\frac{\partial^2 f}{\partial y^2}\Delta y
Δf≈∂f∂xΔx\Delta f\approx\frac{\partial f}{\partial x}\Delta x
Δf≈∂f∂xΔx+∂f∂yΔy\Delta f\approx\frac{\partial f}{\partial x}\Delta x+\frac{\partial f}{\partial y}\Delta y

$$\Delta f\approx\frac{\partial f}{\partial x}\Delta x+\frac{\partial f}{\partial y}\Delta y$$

Explanation

The differential estimates the change by adding each first-order partial derivative multiplied by its corresponding variable change. Second derivatives are not used in this first-order estimate, and omitting the yy term or multiplying the partials together fails to account correctly for both contributions.

14. Starting with the first partial derivative with respect to y, which operation produces the mixed second-order partial derivative with respect to x and y?

Differentiate that first partial derivative with respect to y
Differentiate that first partial derivative with respect to x
Differentiate the function once with respect to both variables simultaneously
Differentiate the first partial derivative with respect to x twice

Differentiate that first partial derivative with respect to x

Explanation

A second-order partial derivative is obtained by differentiating a first-order partial derivative again; here the second differentiation is with respect to x. Differentiating with respect to y again gives a pure y-derivative, while differentiating twice with respect to x starts from the x-partial.

15. A vector field is given by F(x,y,z)=(x2,3y,−2z)\mathbf{F}(x,y,z)=(x^2,3y,-2z). What is its divergence?

x2+3y−2zx^2+3y-2z
2x+3−22x+3-2
(0,0,0)(0,0,0)
2x+12x+1

$$2x+3-2$$

Explanation

Divergence sums the derivative of each component with respect to its matching coordinate: ∂x2∂x+∂(3y)∂y+∂(−2z)∂z=2x+3−2\frac{\partial x^2}{\partial x}+\frac{\partial (3y)}{\partial y}+\frac{\partial (-2z)}{\partial z}=2x+3-2. The component sum skips differentiation, 2x+12x+1 omits the contribution from −2z-2z, and the zero vector is a curl-shaped response rather than a scalar divergence.

16. A function has continuous second-order partial derivatives on an open region. At a point in that region, what relationship must hold between its two mixed second-order partial derivatives?

They equal the two pure second derivatives there
They are equal only if all orders of derivatives are continuous
They are negatives of each other at that point
They are equal at that point

They are equal at that point

Explanation

For a function of class C2C^2 on an open set, the mixed second-order partial derivatives are equal, making the Hessian symmetric. Negating them is a sign error, pure derivatives are different entries, and continuity of every order is not required.

17. For a torus with major radius R=7R=7 and minor radius r=2r=2, what altitude does the model assign to a point with φ=π/6\varphi=\pi/6 and ς=π/2\varsigma=\pi/2?

72\frac{7}{2}
112\frac{11}{2}
52\frac{5}{2}
92\frac{9}{2}

$$\frac{9}{2}$$

Explanation

Substitution gives z=7sin⁡(π/6)+2sin⁡(π/6)sin⁡(π/2)=72+1=92z=7\sin(\pi/6)+2\sin(\pi/6)\sin(\pi/2)=\frac{7}{2}+1=\frac{9}{2}. The value 72\frac{7}{2} omits the minor-radius term, while the other values result from changing the trigonometric factor or its sign.

18. A cabin builder checks which surfaces count toward a wood allowance of 90 m290\,\mathrm{m}^2. Which accounting matches the stated surface-area constraint?

Include the ground-floor rectangle and exclude the cuboid-roof interface
Include both the ground-floor rectangle and the cuboid-roof interface
Exclude both the ground-floor rectangle and the cuboid-roof interface
Exclude the ground-floor rectangle and include the cuboid-roof interface

Include the ground-floor rectangle and exclude the cuboid-roof interface

Explanation

The available wood area includes the ground-floor rectangle but excludes the rectangle between the cuboid and roof. Excluding the floor or counting the internal interface changes which surfaces contribute to the specified allowance.

19. A function has continuous second-order partial derivatives on an open neighborhood of a point. What relationship must hold between its two mixed second-order partial derivatives at that point?

The mixed partial derivatives are negatives of each other.
The mixed partial derivatives are continuous, but may differ.
The mixed partial derivatives equal the pure second derivatives.
The mixed partial derivatives are equal.

The mixed partial derivatives are equal.

Explanation

For a function of class C2C^2 on an open set, the mixed second-order partial derivatives are equal, making the Hessian symmetric. Continuity alone without the stated second-order regularity, opposite signs, and equality with pure derivatives do not express this rule.

20. A class C2C^2 function has a critical point where r=3r=3 and rt−s2=2rt-s^2=2. How does the second-derivative test classify the point?

A local minimum
A saddle point
A local maximum
No classification from this test

A local minimum

Explanation

A positive value of rt−s2rt-s^2 together with r>0r>0 identifies a local minimum at a critical point. A maximum requires r<0r<0, and a saddle requires the determinant expression to be negative.

21. A calculation uses the nabla notation for a vector field F\mathbf{F}. Which expression represents its divergence?

∇f\nabla f
∇×F\nabla\times\mathbf{F}
F×∇\mathbf{F}\times\nabla
∇⋅F\nabla\cdot\mathbf{F}

$$\nabla\cdot\mathbf{F}$$

Explanation

The nabla dot product with a vector field denotes divergence and produces a scalar field. The cross product denotes curl, ∇f\nabla f is the gradient of a scalar field, and reversing the cross-product order changes the operation's sign.

22. For a machine operating at tension U=2U=2 and frequency ω=3\omega=3, which expression gives its yield under the stated model?

1+31+22−2(3)+2(3)\frac{1+3}{1+2^2}-2(3)+2(3)
1+31+2−2(3)+32\frac{1+3}{1+2}-2(3)+3^2
1+31+22−2(3)+32\frac{1+3}{1+2^2}-2(3)+3^2
1+31+22+2(3)+32\frac{1+3}{1+2^2}+2(3)+3^2

$$\frac{1+3}{1+2^2}-2(3)+3^2$$

Explanation

Substitution into R(U,ω)=1+ω1+U2−Uω+ω2R(U,\omega)=\frac{1+\omega}{1+U^2}-U\omega+\omega^2 gives 1+31+22−2(3)+32\frac{1+3}{1+2^2}-2(3)+3^2. The alternatives respectively alter the denominator, reverse the interaction term's sign, or replace ω2\omega^2 with UωU\omega.

23. At a point of a differentiable function of two variables, the differential is zero. What condition does this impose on the first-order partial derivatives there?

Both first-order partial derivatives are zero
Both second-order pure partial derivatives are zero
The function value and both first-order partial derivatives are zero
At least one of the first-order partial derivatives is zero

Both first-order partial derivatives are zero

Explanation

A zero differential is equivalent to a zero gradient, which means both first-order partial derivatives vanish. It places no requirement on the function’s value or on its second-order derivatives.

24. A function has continuous first-order partial derivatives throughout a neighborhood of a point. Which conclusion follows at that point?

The function has a local maximum or minimum
The function is differentiable
The function has continuous second-order partial derivatives
The function has zero first-order partial derivatives

The function is differentiable

Explanation

A function of class C1C^1 at a point is differentiable there. Continuous first-order partial derivatives do not by themselves imply second-order smoothness, an extremum, or vanishing partial derivatives.

25. Which quantity is an example of a scalar field rather than a vector field?

Electric field at each point
Magnetic field at each point
Velocity at each point
Fluid density at each point

Fluid density at each point

Explanation

Fluid density assigns a numerical value to each point, making it a scalar field. Velocity, electric field, and magnetic field assign vectors.

26. A contour map shows nested level curves around a point where the gradient is nonzero. Which local geometric relationship should hold between the gradient and the contour through that point?

The gradient points in the direction of greatest decrease
The gradient is tangent to the contour
The gradient is parallel to the contour
The gradient is normal to the contour

The gradient is normal to the contour

Explanation

The gradient points toward maximal increase and is normal to the function's contour lines. A tangent direction follows a level curve, while greatest decrease points opposite the gradient.

27. An analyst is given that the cabin-volume function has a unique global maximum for positive base dimensions. What procedure yields the maximizing cabin dimensions and volume?

Optimize the unconstrained volume, then recover hh from the area constraint
Locate the global maximum of V(x,y)V(x,y), then recover hh from the area constraint
Recover hh from the area constraint, then select base dimensions independently
Locate a stationary point of V(x,y)V(x,y), then treat it as the global maximum

Locate the global maximum of $$V(x,y)$$, then recover $$h$$ from the area constraint

Explanation

Under the stated uniqueness assumption, the maximum of the reduced function V(x,y)V(x,y) determines the base dimensions; the area constraint then gives the corresponding height. Optimizing the unconstrained volume ignores the constraint, and a stationary point alone is not the stipulated global maximum.

28. At a critical point of a class C2C^2 function, the second-derivative quantities are r=−2r= -2 and rt−s2=6rt-s^2=6. Which classification follows?

The test gives no conclusion because the determinant is positive
A saddle point
A local minimum
A local maximum

A local maximum

Explanation

When rt−s2>0rt-s^2>0 and r<0r<0 at a critical point, the second-derivative test gives a local maximum. A local minimum requires r>0r>0, while a saddle requires a negative determinant.

29. A function has first-order partial derivatives at a point, and its linear approximation leaves an error whose ratio to the distance from that point tends to zero. What does this establish?

Continuity of the partial derivatives
Existence of the partial derivatives
Continuity of the function alone
Differentiability at the point

Differentiability at the point

Explanation

Differentiability means the error after subtracting the first-order linear approximation is negligible compared with the distance to the point. Existence of partial derivatives alone does not establish this, while continuous partial derivatives are a sufficient condition rather than the definition.

30. A vector field is formed by taking the curl of another vector field. What results when the divergence is then applied to it?

A generally nonzero scalar field
The zero vector field
The zero scalar field
The original vector field

The zero scalar field

Explanation

The composition of curl followed by divergence is zero, so the resulting scalar field vanishes. Curl of a gradient is a different zero composition, while the original field is not recovered.

31. A point on a torus has angles φ=3π/2\varphi=3\pi/2 and ς=π/2\varsigma=\pi/2. What is the local nature of this altitude critical point?

A degenerate critical point
A local maximum
A saddle point
A local minimum

A local minimum

Explanation

For ς=π/2\varsigma=\pi/2, the point with φ=3π/2\varphi=3\pi/2 is a local minimum. A local maximum occurs for φ=π/2\varphi=\pi/2 at the same ς\varsigma, while the saddle classification applies when ς=3π/2\varsigma=3\pi/2.

Study with flashcards

Lock in the answers with 62 flashcards on Differential Calculus and Extrema.

What limit defines the partial derivative of f with respect to x at (x,y)?

lim⁡h→0f(x+h,y)−f(x,y)h\lim_{h\to 0}\frac{f(x+h,y)-f(x,y)}{h}

What vector is the gradient of f at (x,y)?

(∂f∂x(x,y),∂f∂y(x,y))\left(\frac{\partial f}{\partial x}(x,y),\frac{\partial f}{\partial y}(x,y)\right)

In which direction does the gradient of f point?

The direction of maximal increase of f.

See the flashcards →

Read the study guide

Go over the full study guide for Differential Calculus and Extrema.

Read the study guide →

Related classes

Make your own practice quizzes

Upload your class notes and Revizly writes a practice quiz with explained answers in about a minute.

Quiz maker