Diode Applications and Analysis Practice Quiz (9 questions)

All questions and answers

1. A circuit must convert a lower AC input voltage into a higher DC output voltage. Which diode application is designed for this purpose?

A voltage-multiplier circuit
A full-wave rectifier
A Zener-diode voltage regulator
A voltage-spike suppressor

A voltage-multiplier circuit

Explanation

A voltage multiplier uses diodes and capacitors to produce a higher DC voltage from a lower AC input. A rectifier converts AC to DC, a Zener regulator controls voltage, and spike suppression protects against transient high voltages.

2. A circuit is exposed to sudden high-voltage spikes that could damage its components. Which diode application addresses this risk?

Voltage-spike suppression
Zener-diode voltage regulation
Half-wave rectification
Reverse-current protection

Voltage-spike suppression

Explanation

Voltage-spike suppression protects a circuit from sudden high-voltage spikes. Zener regulation concerns voltage control, reverse-current protection addresses current direction, and half-wave rectification converts AC.

3. A circuit has a supply voltage of 12 V12\,\text{V} and a series resistance of 2 kΩ2\,\text{k}\Omega. What are the load-line intercepts on the current and voltage axes?

6 mA6\,\text{mA} and 12 V12\,\text{V}
24 mA24\,\text{mA} and 12 V12\,\text{V}
6 mA6\,\text{mA} and 6 V6\,\text{V}
0.17 mA0.17\,\text{mA} and 12 V12\,\text{V}

$$6\,\text{mA}$$ and $$12\,\text{V}$$

Explanation

At VD=0V_D=0, the current intercept is ID=E/R=12 V/2 kΩ=6 mAI_D=E/R=12\,\text{V}/2\,\text{k}\Omega=6\,\text{mA}; at ID=0I_D=0, the voltage intercept is VD=E=12 VV_D=E=12\,\text{V}. The other values result from multiplying instead of dividing, substituting a different voltage intercept, or inverting the ratio.

4. On a diode's characteristic graph, the load line crosses the diode curve at a point labeled Q. Which values does this point identify for the circuit?

The diode threshold voltage and series resistance
The supply voltage and resistor current
The maximum diode current and zero diode voltage
The diode's operating current and voltage

The diode's operating current and voltage

Explanation

The Q-point is the intersection of the load line and diode characteristic curve, identifying the operating values IDQI_{DQ} and VDQV_{DQ}. The maximum-current intercept, threshold voltage alone, and supply voltage do not together define that intersection.

5. What does the DC resistance at a diode’s Q-point represent?

The slope of the circuit’s load line at zero diode voltage
The threshold voltage required to turn the diode on
The ratio of the diode’s Q-point voltage to its Q-point current
The ratio of the source voltage to the resistor current

The ratio of the diode’s Q-point voltage to its Q-point current

Explanation

The Q-point DC resistance is calculated by dividing the diode voltage at the operating point by its current there. The load-line slope describes the surrounding network, not the diode’s Q-point resistance.

6. In the approximate diode model, how is a conducting diode represented in a series-circuit analysis?

As a DC voltage source equal to its threshold voltage
As an open circuit with the full supply across it
As a resistor equal to the other series resistance
As a short circuit with zero forward voltage

As a DC voltage source equal to its threshold voltage

Explanation

The approximate model represents an ON diode by a DC voltage equal to its threshold value. An open circuit is the equivalent used for an OFF diode, not a conducting one.

7. In a series circuit containing a short circuit and an open circuit, what role does the open circuit play in determining the total current?

It bypasses the other components, allowing current through the short.
It acts as a load that sets the current according to its resistance.
It breaks the series path, making the total current zero.
It reduces the source voltage while maintaining a small current.

It breaks the series path, making the total current zero.

Explanation

An open circuit interrupts the single current path, so even a short circuit elsewhere in series cannot provide a complete path for current. A short circuit by itself can provide a low-resistance path, but it cannot overcome the break caused by the open circuit.

8. Which set of applications includes rectification, clipping, clamping, and Zener voltage regulation as established uses of diodes?

Threshold modeling and equivalent-circuit analysis
Signal conditioning and power conversion circuits
Load-line construction and Q-point measurement
Series-resistance calculation and current limiting

Signal conditioning and power conversion circuits

Explanation

Diodes are used in half- and full-wave rectifiers, clippers, clampers, and Zener-diode voltage regulators. Load-line construction and Q-point measurement describe circuit analysis methods, not the application set asked about.

9. How do the load line and the diode characteristic curve differ in what determines their shape?

The resistor determines both curves, while the source voltage and selected diode affect only their intersection.
The selected diode determines the load line, while the circuit network determines its characteristic curve.
The circuit network determines the load line, while the selected diode determines its characteristic curve.
The source voltage determines both curves, while the resistor and diode affect only their intersection.

The circuit network determines the load line, while the selected diode determines its characteristic curve.

Explanation

The load line is set by the circuit network, whereas the diode characteristic curve depends on the chosen device. The selected diode therefore does not determine the load line; the network does.

Study with flashcards

Lock in the answers with 10 flashcards on Diode Applications and Analysis.

What does a load line plot for a given circuit?

All possible combinations of diode current and diode voltage.

What is the load-line current intercept when VD=0V_D=0?

ID=E/RI_D=E/R.

What does a voltage multiplier use to produce higher DC voltage from lower AC voltage?

Diodes and capacitors.

See the flashcards →

Read the study guide

Go over the full study guide for Diode Applications and Analysis.

Read the study guide →

Related classes

Make your own practice quizzes

Upload your class notes and Revizly writes a practice quiz with explained answers in about a minute.

Quiz maker