Energy, Systems and Efficiency Practice Quiz (11 questions)

All questions and answers

1. A set of components interacts to carry out a particular process. What term describes this collection?

An output
A system
A process
An input

A system

Explanation

A system is a collection of interacting or interdependent components that work together for a specific function or process. An input enters a system, a process is an action within it, and an output is a result.

2. A student distinguishes the capacity to make a change from the transfer that occurs when a force moves an object. Which pairing correctly identifies these ideas?

Work is the ability to do energy; energy is the transfer of work
Energy and work both describe the transfer of energy
Energy and work both describe the ability to cause change
Energy is the ability to do work; work is the transfer of energy

Energy is the ability to do work; work is the transfer of energy

Explanation

Energy is the ability to do work, whereas work is the transfer of energy. Reversing the definitions or treating both as capacity or both as transfer erases the distinction.

3. A cart is moving across a level track while a spring nearby remains compressed. Which form of energy does the moving cart have because it is in motion?

Thermal energy
Gravitational potential energy
Kinetic energy
Potential energy

Kinetic energy

Explanation

Kinetic energy is the energy of motion, so the moving cart has kinetic energy. Potential energy refers to stored energy, gravitational potential energy depends on position, and thermal energy is associated with particle motion.

4. A ball is held above the ground and then released to fall. As it descends, what happens to its gravitational potential energy?

It is converted into kinetic energy
It remains stored as potential energy
It is converted into gravitational potential energy
It is converted into thermal energy

It is converted into kinetic energy

Explanation

As an object falls, its stored gravitational potential energy becomes energy of motion, or kinetic energy. The other choices reverse the conversion, substitute thermal energy, or ignore the change during the fall.

5. Which example represents potential energy because energy is stored through an object's position or configuration?

Energy transferred while pushing a box
Heat produced by vibrating particles
Energy stored in a stretched spring
Energy carried by a rolling ball

Energy stored in a stretched spring

Explanation

Potential energy is stored energy associated with position or configuration, as in a spring. A rolling ball has kinetic energy, vibrating particles have thermal energy, and pushing a box describes energy transfer through work.

6. A 4.0 kg object moves at 3.0 m/s3.0\,\text{m/s}. What is its kinetic energy?

36 J36\,\text{J}
18 J18\,\text{J}
9 J9\,\text{J}
6 J6\,\text{J}

$$18\,\text{J}$$

Explanation

Using Ek=12mv2E_k = \frac{1}{2}mv^2 gives 12×4.0×3.02=18 J\frac{1}{2} \times 4.0 \times 3.0^2 = 18\,\text{J}. 36 J36\,\text{J} omits the one-half factor; the other values reflect errors in using the squared velocity or the given quantities.

7. A worker pushes a crate east, and the crate moves east in the direction of the applied force. What describes the energy transfer in this situation?

Work is done because the crate possesses energy
No work is done unless the crate gains gravitational potential energy
Work is done as energy is transferred to the crate
No work is done because a force must act without contact

Work is done as energy is transferred to the crate

Explanation

Work transfers energy when a force moves an object in the force's direction. Possessing energy is not itself work, a particular energy form is not required, and contact is not required for every force.

8. A sliding block slows as it rubs against a rough surface. Which energy change explains this slowdown?

The block's kinetic energy is converted into gravitational potential energy
The block's kinetic energy is converted into heat energy
The block's heat energy is converted into kinetic energy
The block's kinetic energy is converted into chemical potential energy

The block's kinetic energy is converted into heat energy

Explanation

Friction converts an object's kinetic energy into heat energy, so the block slows down. Reversing that conversion or naming gravitational or chemical potential energy misidentifies the effect of friction.

9. A scientist describes the microscopic motion of particles in a warm object. Which form of energy is this?

Gravitational potential energy
Thermal energy
Kinetic energy of the object's bulk motion
Chemical potential energy

Thermal energy

Explanation

Thermal energy is the kinetic energy of particles. Bulk kinetic energy refers to an object's motion, gravitational potential energy depends on position, and chemical potential energy is stored in fuel or bonds.

10. A 2.0 kg object is raised by 3.0 m. Using g=9.8 m/s2g = 9.8\,\text{m/s}^2, what gravitational potential energy does it gain?

8.82 J8.82\,\text{J}
176.4 J176.4\,\text{J}
58.8 J58.8\,\text{J}
6.0 J6.0\,\text{J}

$$58.8\,\text{J}$$

Explanation

Use Eg=mgΔhE_g = mg\Delta h: 2.0×9.8×3.0=58.8 J2.0 \times 9.8 \times 3.0 = 58.8\,\text{J}. The value 6.0 J6.0\,\text{J} omits gravity, while the other values result from applying an incorrect calculation.

11. Two objects are at the same height and move at the same speed. Object A has greater mass than Object B. Which comparison follows from how mass affects these energies?

Object A has equal potential but greater kinetic energy
The objects have equal potential and kinetic energy
Object A has greater potential and kinetic energy
Object A has greater potential but equal kinetic energy

Object A has greater potential and kinetic energy

Explanation

Both potential energy and kinetic energy increase with mass, so the more massive object has more of each when height and speed are equal. The alternatives incorrectly omit mass's effect on one or both energy forms.

Study with flashcards

Lock in the answers with 25 flashcards on Energy, Systems and Efficiency.

What is potential energy?

Stored energy associated with an object's position.

Which kinds of energy are examples of potential energy in the lesson?

Chemical, gravitational, and mechanical energy.

What is kinetic energy?

The energy of motion.

See the flashcards →

Read the study guide

Go over the full study guide for Energy, Systems and Efficiency.

Read the study guide →

Related classes

Make your own practice quizzes

Upload your class notes and Revizly writes a practice quiz with explained answers in about a minute.

Quiz maker