Finite Element Method for Engineering PDEs Practice Quiz (11 questions)

All questions and answers

1. Which set consists of fields that engineering PDEs can describe as varying across space and time?

Temperature, displacement, pressure, velocity, and electric potential
Density, conductivity, geometry, mesh size, and boundary shape
Loads, coefficients, materials, geometry, and constitutive laws
Elements, nodes, basis functions, matrices, and boundary conditions

Temperature, displacement, pressure, velocity, and electric potential

Explanation

Engineering PDEs describe spatially and temporally varying fields, including temperature, displacement, pressure, velocity, and electric potential. The other choices substitute material properties, model inputs, or FEM components for field variables.

2. When an engineer applies the finite element method to a continuous physical model, what kind of problem does the method produce?

A continuous differential model with unchanged variables
A finite-dimensional algebraic problem
A physical experiment that directly measures the field
An exact analytical solution in continuous form

A finite-dimensional algebraic problem

Explanation

The finite element method transforms a continuous physical model into a finite-dimensional algebraic problem. An exact analytical solution or a physical experiment is not that transformation, and the continuous model remains the starting point.

3. A second-order PDE has principal-part coefficients A=3A=3, B=2B=2, and C=2C=2. What value of Δ=AC−B2\Delta=AC-B^2 should be used to classify it?

1010
1414
−2-2
22

$$2$$

Explanation

Using Δ=AC−B2\Delta=AC-B^2 gives 3×2−22=6−4=23\times2-2^2=6-4=2. The value 1010 comes from adding rather than subtracting, 1414 omits the square on BB, and −2-2 results from doubling BB before squaring.

4. A model is intended to represent diffusion that smooths temperature differences over time. Which PDE class best matches that behavior?

Parabolic
Wave-type
Elliptic
Hyperbolic

Parabolic

Explanation

Parabolic PDEs model diffusion or smoothing, so this class fits the temperature model. Elliptic equations are associated with equilibrium or global influence, while hyperbolic and wave-type descriptions concern wave propagation.

5. What does the weak formulation of a heat-conduction problem require?

A finite sum of nodal values multiplied by basis functions over the entire domain
The differential equation to hold at every point in the domain together with the boundary conditions
An integral relation against admissible test functions, involving only first derivatives of temperature in the heat-conduction example
A balance of element contributions assembled into a global algebraic system

An integral relation against admissible test functions, involving only first derivatives of temperature in the heat-conduction example

Explanation

A weak formulation expresses the problem through an integral relation tested against admissible functions; for heat conduction, it involves only first derivatives of temperature. The pointwise differential equation with boundary conditions describes the strong formulation instead.

6. For a linear one-dimensional finite element of length hh, what are the derivatives of its two shape functions?

They vary linearly from −1-1 to 11 across the element.
They are constant, with values −h-h and hh.
They are zero at the two element nodes and nonzero in its interior.
They are constant, with values −1h-\frac{1}{h} and 1h\frac{1}{h}.

They are constant, with values $$-\frac{1}{h}$$ and $$\frac{1}{h}$$.

Explanation

Linear shape functions vary linearly with position, so their derivatives are constant and equal to −1h-\frac{1}{h} and 1h\frac{1}{h}. The derivatives are not −h-h and hh; their magnitude is inversely proportional to the element length.

7. What is the role of assembling element contributions that share a node in a finite element model?

To replace the element equations with a separate local solve at each node
To convert prescribed fluxes into values of the primary unknown
To make the global matrix dense so distant nodes interact directly
To combine them into the corresponding entries of the global system matrix and vector

To combine them into the corresponding entries of the global system matrix and vector

Explanation

Assembly accumulates contributions from elements sharing a node into the same global rows and columns, creating the system to be solved. Prescribed fluxes enter naturally through the weak-form boundary integral rather than being converted into primary-unknown values.

8. How do the velocity and pressure approximations in a finite element formulation of incompressible Stokes flow differ?

They use the same approximation space, with compatibility determined by the mesh refinement level.
Pressure uses a separate space, while velocity is determined directly from the incompressibility constraint.
They use separate approximation spaces, with their pairing required to satisfy an inf–sup compatibility condition.
Velocity uses a continuous space, while pressure is prescribed through a Neumann boundary integral.

They use separate approximation spaces, with their pairing required to satisfy an inf–sup compatibility condition.

Explanation

The Stokes method approximates velocity and pressure in separate spaces, and the pair must satisfy the inf–sup condition for stability. Using the same space is not a general requirement and does not by itself ensure a stable mixed formulation.

9. Why can a converged linear solver still produce an incorrect engineering result?

Solver convergence confirms the boundary conditions but does not establish that post-processing is appropriate.
Solver convergence confirms the algebraic solve but does not establish that the model or physics is correct.
Solver convergence confirms the physical model but does not establish that the mesh is sufficiently refined.
Solver convergence confirms the weak form but does not establish that the global system was assembled.

Solver convergence confirms the algebraic solve but does not establish that the model or physics is correct.

Explanation

A converged solver indicates that the algebraic system has been solved, but the result also depends on a sound physical model and appropriate numerical methods. Mesh refinement can help assess numerical accuracy, but solver convergence alone does not establish model validity or overall correctness.

10. An engineer wants to check that an FEM solution approaches the expected accuracy as the mesh is refined. Is this primarily verification or validation?

Validation, because it checks sensitivity to material parameters
Verification, because it tests the numerical solution procedure
Validation, because it tests agreement with physical measurements
Verification, because it compares the model with experimental reality

Verification, because it tests the numerical solution procedure

Explanation

Mesh refinement tests whether the numerical equations are being solved with the expected accuracy, which is verification. Validation instead assesses whether the governing equations represent reality, often through comparison with experiments.

11. Which features commonly make analytical solutions to engineering PDE models difficult to obtain?

Nonlinear laws and coupled physics, but no spatial variation in loads or boundary conditions
Complex geometry, but constant coefficients and uniform conditions across a single material
Complex geometry, multiple materials, nonlinear laws, coupled physics, or non-uniform conditions
Simple geometry, uniform materials, linear laws, uncoupled physics, or uniform conditions

Complex geometry, multiple materials, nonlinear laws, coupled physics, or non-uniform conditions

Explanation

Engineering models often combine complex geometries, multiple materials, nonlinear constitutive laws, coupled physics, and non-uniform loads or boundary conditions, limiting the availability of analytical solutions. The option involving simple, uniform, uncoupled conditions describes a much less challenging setting.

Study with flashcards

Lock in the answers with 10 flashcards on Finite Element Method for Engineering PDEs.

What fields do engineering PDEs describe as they vary in space and time?

Temperature, displacement, pressure, velocity, and electric potential.

How is the discriminant defined for a second-order PDE with principal part Auxx+2Buxy+CuyyAu_{xx}+2Bu_{xy}+Cu_{yy}?

[Delta=AC−B2[Delta=AC-B^2

Which discriminant signs classify elliptic, parabolic, and hyperbolic PDEs?

Elliptic: [Delta>0[Delta>0; parabolic: [Delta=0[Delta=0; hyperbolic: [Delta<0[Delta<0.

See the flashcards →

Read the study guide

Go over the full study guide for Finite Element Method for Engineering PDEs.

Read the study guide →

Related classes

Make your own practice quizzes

Upload your class notes and Revizly writes a practice quiz with explained answers in about a minute.

Quiz maker