1. Two point masses of and are separated by . What is the magnitude of their mutual gravitational force?
$$3G$$
Explanation
Using gives . The value comes from using rather than , omits the separation factor, and uses the sum of the masses.
$$3G$$
Explanation
Using gives . The value comes from using rather than , omits the separation factor, and uses the sum of the masses.
Force per unit test mass
Explanation
The gravitational field is the limiting force per unit test mass, distinguishing it from the force acting on a particular mass. “Force on the chosen test mass” is the force itself, while the source mass and force multiplied by test mass are not the field definition.
It becomes one-quarter as large.
Explanation
For a point mass, , so doubling the distance divides the field by . Halving it reflects an inverse-distance rule, an unchanged field ignores distance dependence, and quadrupling it reverses the square dependence.
$$\frac{2G\lambda}{r}$$
Explanation
An infinite straight wire produces at perpendicular distance . The inverse-square choices apply the wrong distance dependence, while omits the factor of two.
$$\frac{GM}{2R^2}$$
Explanation
Inside a uniform solid sphere, ; substituting gives . The inverse-square value is the exterior field at that radius, zero is the hollow-shell result, and is the surface value.
$$-\frac{3GM}{2R}$$
Explanation
The interior potential is ; at the center, , so . The surface expression applies at , the exterior expression is not valid at the center, and zero field at the center does not mean zero potential.
$$\sqrt{\frac{2GM}{R}}$$
Explanation
Escape speed follows from equating the launch kinetic energy to the energy needed to reach infinity, giving . The expression is the circular-orbit speed, while the other choices alter the required factor or radius dependence.
$$\sqrt{\frac{GM_e}{R}}$$
Explanation
For an object dropped from rest at Earth's surface, the specified energy-conservation result for its maximum speed at the center is . The doubled numerator corresponds to surface escape speed, not this fall-through result.
$$-\frac{GMm}{2r}$$
Explanation
For a circular orbit, total mechanical energy is ; the kinetic energy is equal to its magnitude, and the potential energy is twice that magnitude. The full is the potential energy, while the positive value has the wrong sign for a bound orbit.
$$g\approx g_0\left(1-\frac{2h}{R}\right)$$
Explanation
For height small compared with Earth's radius, expanding to first order gives . The coefficient belongs to the depth approximation, and a positive correction would incorrectly make gravity increase with height.
$$-\frac{GM}{3a}$$
Explanation
Gravitational potential from a point mass is , so substituting gives . The positive value omits the negative sign, the multiplied-distance expression uses the wrong dependence, and the inverse-square expression gives the field’s distance dependence rather than potential.
A factor of $$8$$
Explanation
Since , multiplying the radius by multiplies the period by . The other values result from using a linear, square-root, or cubic dependence instead.
$$\sqrt{\frac{G(m_1+m_2)}{d^3}}$$
Explanation
The two stars have the same angular speed, given by . The mass difference and missing cubic distance alter the relationship, while the final expression is the orbital period, not angular speed.
The heavier star’s radius is much smaller, and the lighter star’s is approximately $$R$$.
Explanation
The center of mass lies much closer to the heavier star, so its orbital radius is much smaller while the lighter star’s radius is approximately the separation . The reversed description swaps their roles, equal radii presume comparable masses, and assigning to both confuses each radius with the separation.
It becomes one-quarter as large.
Explanation
Gravitational force is proportional to the inverse square of separation, so doubling the separation multiplies the force by . The half-size answer uses an inverse-distance rule, the fourfold answer reverses the dependence, and the unchanged answer ignores separation.
The minimum speed needed to just escape Earth’s gravitational field.
Explanation
Escape speed is the minimum surface speed that allows an object to just escape Earth’s gravitational field. Circular-orbit speed describes a bound orbit, while atmospheric-boundary speed and a returning trajectory do not define escape.
It is $$\sqrt{2}$$ times Earth’s escape speed.
Explanation
With surface gravity fixed, , so doubling the radius multiplies escape speed by . The half-speed answer applies the fixed-mass scaling, the equal-speed answer omits the radius dependence, and the doubled-speed answer uses a linear dependence.
Both require the same escape speed.
Explanation
Escape speed is independent of the escaping body’s mass, projection angle, and projection direction, so both projectiles have the same required speed. The heavier-projectile claim confuses speed with mass-dependent escape energy; the direction and angle claims incorrectly make the threshold depend on launch orientation.
At one focus of the ellipse
Explanation
Kepler’s first law places the Sun at one focus of each planetary elliptical orbit. The ellipse’s center is not generally a focus, and placing the planet at a focus or the star outside the ellipse reverses or misplaces the stated relationship.
The swept areas are equal
Explanation
Kepler’s second law states that the line from the planet to the Sun sweeps out equal areas in equal times. Equal distances, greater area at larger distances, and equal angular changes are different conditions, not the law’s stated rule.
The planet with the larger semi-major axis has a longer period, with $$T^2$$ proportional to $$a^3$$
Explanation
Kepler’s third law gives , so increasing the semi-major axis increases the orbital period. The inverse relation reverses the trend, the linear relation uses the wrong proportionality, and equal periods ignore the dependence on .
$$\sqrt{\frac{GM}{R_e+h}}$$
Explanation
The orbital radius is measured from Earth’s center, so , and the circular orbital speed is . Using alone omits Earth’s radius, the period formula gives a time rather than a speed, and the last expression reverses the mass and radius dependence.
$$\frac{2\pi r^{3/2}}{\sqrt{GM}}$$
Explanation
For a circular orbit, . Omitting the square root changes the gravitational factor, is orbital speed, and the final expression has the wrong radius power.
Their periods satisfy $$T^2\propto r^3$$
Explanation
For satellites orbiting the same planet, Kepler’s third law gives . The radius-squared relation applies to a different specified mass distribution, while the inverse and linear relationships do not match this law.
$$r_{\min}v_{\max}=r_{\max}v_{\min}$$
Explanation
Conservation of angular momentum at the closest and farthest points gives . Pairing each radius with the speed at the same extreme reverses the required pairing, while equal speeds would disregard the varying orbital speed.
$$\frac{g_0}{4}$$
Explanation
At height , the distance from the planet's center is , so the inverse-square rule gives . The other values result from omitting or misapplying the distance-squared factor.
$$\frac{2g_0}{3}$$
Explanation
For uniform density, acceleration at depth is ; substituting gives . The alternatives reflect using a height rule or mishandling the fraction removed from surface gravity.
At the equator
Explanation
The rotational reduction is proportional to , which is greatest at the equator and vanishes at the poles. Treating the effect as uniform or maximal at the poles ignores this latitude dependence.
$$\frac{A}{\sqrt{x^2+a^2}}$$
Explanation
With potential zero at infinity, integrating the given field yields a potential whose magnitude is . The other expressions preserve the field's power, omit the square root, or give the field rather than potential.
$$\frac{3GM^2}{5R}$$
Explanation
The energy required to disperse a uniform sphere is the magnitude of its gravitational self-energy, . The alternatives omit or replace the sphere-specific factor or give the wrong radius dependence.
$$\frac{M_2}{R_2}=\frac{M}{R}$$
Explanation
Escape speed is , so equal speeds require equal mass-to-radius ratios. The squared-radius ratio belongs to surface gravity, while equal individual masses and radii are not required.
They have the same orbital period.
Explanation
Both stars orbit the common centre of mass with the same period, even though their orbital radii can differ. A longer period for one star confuses radius or mass differences with the shared orbital cycle.
$$2\pi\sqrt{\frac{d^3}{3Gm}}$$
Explanation
For a binary, ; here the separation is and the total mass is . The other expressions omit part of the total mass, use the reciprocal angular-frequency factor, or invert the dependence.
It becomes $$8$$ times as long.
Explanation
Kepler’s third law gives , so multiplying the radius by multiplies the period by . The other choices reflect linear, square-root, or inverse scaling instead.
The field is zero, while the potential is constant and generally nonzero.
Explanation
Inside a uniform spherical shell, the gravitational field vanishes, but the potential is constant and generally nonzero. The zero-potential choice confuses field with potential; the nonzero or varying-field choices do not describe the shell’s interior.
$$\frac{GM}{9R^2}$$
Explanation
Gravitational acceleration at distance is ; substituting gives . The alternatives use an incorrect distance power or place the distance factor in the numerator.
A 24-hour equatorial orbit moving with Earth's rotation
Explanation
A geostationary satellite has a 24-hour period, orbits in the equatorial plane, and moves in Earth's direction of rotation, so it remains at rest relative to Earth. A polar orbit misses the equatorial-plane requirement, a 12-hour orbit has the wrong period, and retrograde motion has the wrong direction.
It increases by a factor of $$2\sqrt{2}$$
Explanation
The orbital-period relation gives , so doubling the radius multiplies the period by . A linear scaling misses the exponent, an inverse-square scaling reverses the effect, and a radius-independent period ignores the relation.
Lock in the answers with 75 flashcards on Gravitation and Gravitational Fields.
What is the force magnitude between point masses and separated by distance ?
.
How is the gravitational field defined using force and limiting test mass?
.
What is the field magnitude produced by a point mass at distance ?
.
Go over the full study guide for Gravitation and Gravitational Fields.
Read the study guide →Upload your class notes and Revizly writes a practice quiz with explained answers in about a minute.
Quiz maker