Study guide: Statistics for Management

Course Outline

  1. Displays for Qualitative Data
  2. Displays for Quantitative Data
  3. Distribution Shape and Unusual Features
  4. Measures of Central Tendency
  5. Measures of Variability
  6. Comparing Spread with the Mean
  7. Chebyshev and Empirical Rules
  8. Z-Scores and Percentiles
  9. Quartiles and Interquartile Range
  10. Outliers and Box Plots
  11. Choosing Centre and Spread Measures

1. Displays for Qualitative Data

Key Concepts & Definitions

  • Table of counts: Lists each category and the number of observations in it, obtained by tallying responses; it may show counts, percentages, or both.

β˜… Must-know

  • A bar graph displays qualitative categories with equal-width vertical bars whose heights show frequency or percentage, using a zero point for the percentage scale.

Further detail

  • A pie chart shows how a total quantity is divided among categories, with sector angles proportional to category percentages; a 10% share corresponds to 36Β°.

πŸ“Œ A Pareto diagram is a bar graph whose categories are ordered by descending height from left to right.

2. Displays for Quantitative Data

Key Concepts & Definitions

  • Histogram: Groups quantitative values into equal-width class intervals, or bins, and places a vertical bar over each interval with height equal to its frequency or relative frequency; bars have no gaps unless a class has zero frequency.

β˜… Must-know

  • Quantitative data are summarized with tables or displays because large data sets are difficult to understand without summaries; bar charts and pie charts are better suited to categorical variables.

  • A stem-and-leaf display separates each observation into a stem and a leaf, lists stems in order, and places each leaf in its stem's row to the right of a bar.

Further detail

  • For the values 21, 24, 24, 26, 27, 27, 30, 32, 38, and 41, the stem-and-leaf display is 2 | 1 4 4 6 7 7; 3 | 0 2 8; 4 | 1.

  • For teenage smoking rates in 36 European countries, the histogram bins [10–20), [20–30), [30–40), and [40–50) have frequencies 6, 15, 12, and 3, respectively.

πŸ“Œ Histogram bins must have equal widths, but their width and starting point can be adjusted to improve visualization; changing the bins can change the apparent distribution.

3. Distribution Shape and Unusual Features

Key Concepts & Definitions

  • Right-skewed distribution: Has a mean greater than its median.
  • Left-skewed distribution: Has a mean below its median.
  • Symmetric distribution: Has equal mean and median.
  • Outlier: A data value significantly above or below the other values.
  • Gap: Occurs when a number of adjacent bins contain no data.
  • Cluster: A small group of data values located far from the others and may indicate a distinct group that should be analyzed separately.

β˜… Must-know

  • The teenage smoking rates in the 36 European-country example are typically in the 20s or 30s, range from 10% to 43%, and have an approximately bell-shaped distribution.

Further detail

πŸ“Œ When a distribution contains unusual features such as outliers, gaps, or clusters, use the median rather than the mean.

4. Measures of Central Tendency

Key Concepts & Definitions

  • Mean: A common measure of central tendency and the balance point of the data, calculated by dividing the sum of the observations by their number.
  • Median: The median is the middle value in an ordered data set; for an even number of observations, it is the average of the two middle values, and its position is (n+1)/2.
  • Mode: The value that occurs most often; a data set may have no mode or several modes, and the mode can be used for quantitative or qualitative data.

Essential Points

πŸ“ Formula - The sample mean is xΛ‰=βˆ‘i=1nxin\bar{x}=\frac{\sum_{i=1}^{n}x_i}{n}, while the population mean is ΞΌ=βˆ‘i=1NxiN\mu=\frac{\sum_{i=1}^{N}x_i}{N}.

  • For teenage smoking rates in 36 European countries, the mean rate is approximately 27.973%, or about 28%.

  • For an odd number of observations, the median is the single middle value in the ordered sequence.

  • For teenage smoking rates in the European-country example, the median is 29%, the average of the 18th and 19th ordered values.

Memory Hook

Mean as a balance point; median as the middle value, resistant to extremes.

5. Measures of Variability

Key Concepts & Definitions

  • Range: Measures dispersion as the difference between the largest and smallest observations and ignores how the data are distributed.
  • Variance: A common measure of dispersion that considers how data are distributed around the mean.
  • Standard deviation: A common measure of dispersion that describes variation about the mean; a larger standard deviation indicates more spread-out data.

Essential Points

πŸ“ Formula - The range is R=xlargestβˆ’xsmallestR=x_{\text{largest}}-x_{\text{smallest}}.

  • For teenage smoking rates in the European-country example, the range is 43βˆ’10=33 percentage points.

πŸ“ Formula - The sample variance is s2=βˆ‘i=1n(xiβˆ’xΛ‰)2nβˆ’1s^2=\frac{\sum_{i=1}^{n}(x_i-\bar{x})^2}{n-1}, while the population variance is Οƒ2=βˆ‘i=1N(xiβˆ’ΞΌ)2N\sigma^2=\frac{\sum_{i=1}^{N}(x_i-\mu)^2}{N}.

πŸ“ Formula - The sample standard deviation is the square root of the sample variance, s=s2s=\sqrt{s^2}.

  • For teenage smoking rates in the European-country example, the sample standard deviation is 9.173.

6. Comparing Spread with the Mean

Key Concepts & Definitions

  • Coefficient of Variation: The coefficient of variation compares the standard deviation with the mean to assess the relative size of the spread.

Essential Points

πŸ“ Formula - The coefficient of variation is calculated as sxΛ‰\frac{s}{\bar{x}} for sample data.

  • For teenage smoking in Europe, with standard deviation 9.173 and mean 27.973, the coefficient of variation is 0.328, indicating a relatively moderate spread.

  • The default approximate cutoff for interpreting a coefficient of variation as relatively moderate is 0.4.

7. Chebyshev and Empirical Rules

β˜… Must-know

πŸ“Œ Chebyshev’s Rule states that at least 1βˆ’1k21-\frac{1}{k^2} of the data lie within k standard deviations of the mean, for k greater than 1.

πŸ“Œ The Empirical Rule applies to unimodal, symmetric, bell-shaped data: approximately 68% lie within one standard deviation, 95% within two, and 99.7% within three standard deviations of the mean.

Further detail

  • Chebyshev’s Rule guarantees at least three-quarters of the data within two standard deviations of the mean and at least eight-ninths within three standard deviations.

  • For male students with mean height 171 cm and standard deviation 7 cm, the interval 164–178 cm is one standard deviation from the mean, so approximately 68% fall within it under the Empirical Rule.

Memory Hook

Chebyshev applies without a bell shape; the Empirical Rule requires a unimodal, symmetric distribution.

8. Z-Scores and Percentiles

Key Concepts & Definitions

  • Z-Score: A z-score gives a measurement’s location relative to the data in standard-deviation units and has no unit.
  • Percentile: The pth percentile is a value below which p% of the data fall and above which (100 βˆ’ p)% fall.

β˜… Must-know

πŸ“ Formula - For a sample, the z-score is z=xβˆ’xΛ‰sz=\frac{x-\bar{x}}{s}, and for a population it is z=xβˆ’ΞΌΟƒz=\frac{x-\mu}{\sigma}.

Further detail

  • A z-score closer to zero indicates a more typical, less unusual data value; a negative z-score indicates a value below the mean, and a positive z-score indicates a value above the mean.

  • The median is the 50th percentile.

  • A GMAT score of 560 at the 58th percentile means 58% of test takers scored lower and 42% scored higher.

9. Quartiles and Interquartile Range

Key Concepts & Definitions

  • Quartiles: Quartiles divide ordered data into four quarters: Q1 is the 25th percentile, Q2 is the median, and Q3 is the 75th percentile.
  • Interquartile Range: The interquartile range, also called the midspread, is the difference between the third and first quartiles and measures the spread of the middle 50% of data.

Essential Points

πŸ“ Formula - The interquartile range is IQR=Q3βˆ’Q1IQR=Q_3-Q_1.

  • For the teenage-smoking example, Q1 is 21%, Q3 is 35%, and the IQR is 14 percentage points, so the middle half of countries spans 14 percentage points.

10. Outliers and Box Plots

Key Concepts & Definitions

  • Box Plot: A box plot displays data using the five-number summary, with a box from Q1 to Q3, a median line, and whiskers extending to the most extreme values within the fences.
  • Five-Number Summary: The five-number summary consists of the minimum, first quartile, median, third quartile, and maximum.

β˜… Must-know

πŸ“Œ An observation with an absolute z-score greater than 2 is considered an outlier, and one with an absolute z-score greater than 3 is an extreme outlier.

Further detail

  • The upper fence is Q3+1.5(IQR)Q_3+1.5(IQR) and the lower fence is Q1βˆ’1.5(IQR)Q_1-1.5(IQR).

πŸ“Œ In a box plot, whiskers extend from the box to the most extreme data values within the fences, while values outside the fences are shown separately as outliers.

  • For the wind-speed data, Q1 is 1.15, the median is 2.05, Q3 is 3.05, and IQR is 1.9; the fences are βˆ’1.7 and 5.9, so the whiskers reach 0.2 and 5.8 and the outliers are 6, 6.4, 6.7, and 8.9.

Memory Hook

Build the box, set the fences, extend whiskers, then mark outliers.

11. Choosing Centre and Spread Measures

Essential Points

πŸ“Œ Mean-based measures, including the mean and standard deviation, are sensitive to extreme values, whereas order-based measures, including the median, quartiles, and IQR, are resistant to them.

πŸ“Œ Use the median and IQR instead of the mean and standard deviation when a distribution is not unimodal, is not symmetric, or has outliers, gaps, or clusters.

Synthesis Tables

Sensitivity to Extreme Values

Measure typeExamplesResponse
Mean-basedMean, standard deviationSensitive to extreme values
Order-basedMedian, quartiles, IQRResistant to extreme values

Test yourself

Take a 26-question practice quiz on Statistics for Management, with every answer explained.

1. A survey records respondents’ preferred commute method. Which summary directly reports the number of responses in each method category?

2. A report uses a vertical bar graph to compare percentages across four favorite music genres. Which design follows the conventions for a qualitative-data bar graph?

Take the quiz β†’

Study with flashcards

Memorize the key concepts of Statistics for Management with 80 flashcards.

What does a table of counts list for each category?

The number of observations in it.

How are category counts in a table of counts obtained?

By tallying responses.

What may a table of counts display besides counts?

Percentages.

See the flashcards β†’

Related classes

Make your own study guides

Upload your class notes and Revizly writes a study guide, a quiz and flashcards in about a minute.

Study guide maker