Statistics for Management Practice Quiz (26 questions)

All questions and answers

1. A survey records respondents’ preferred commute method. Which summary directly reports the number of responses in each method category?

A bar graph showing category heights
A numerical summary giving the median commute
A table listing each category and its tally
A table listing percentages without category counts

A table listing each category and its tally

Explanation

A table of counts lists each category and the number of observations obtained by tallying responses; it may include counts, percentages, or both. A bar graph is a display, a median summarizes quantitative values, and percentages alone are not category counts.

2. A report uses a vertical bar graph to compare percentages across four favorite music genres. Which design follows the conventions for a qualitative-data bar graph?

Unequal-width bars with heights showing percentages from a zero baseline
Equal-width bars with heights showing percentages from a nonzero baseline
Equal-width bars with heights showing percentages from a zero baseline
Equal-width bars separated by interval gaps to show quantitative values

Equal-width bars with heights showing percentages from a zero baseline

Explanation

A qualitative bar graph uses equal-width vertical bars whose heights represent frequency or percentage, and its percentage scale starts at zero. Unequal widths misrepresent the convention, a nonzero baseline violates the percentage-scale rule, and interval gaps confuse categorical bars with quantitative intervals.

3. A manager must summarize a large set of measured delivery times. Which approach best fits the data type and the purpose of making the data easier to understand?

Convert the measurements to category labels before any summary
Use a bar chart or pie chart because the measurements are numerical
Leave the measurements unsummarized because a large set is self-explanatory
Use a table or quantitative-data display to summarize the measurements

Use a table or quantitative-data display to summarize the measurements

Explanation

Large quantitative data sets are difficult to understand without summaries, so a table or suitable quantitative display is appropriate. Bar charts and pie charts are better suited to categorical variables; leaving the data unsummarized or converting values to categories is not the stated general approach.

4. A dataset contains 34, 31, 37, and 42. In a stem-and-leaf display using the tens digit as the stem, how should these observations be arranged?

4 | 2; 3 | 1 4 7
3 | 1 4 7; 4 | 2
3 | 7 4 1; 4 | 2
1 | 3 4 7; 2 | 4

3 | 1 4 7; 4 | 2

Explanation

Each value is split into a tens stem and a ones leaf; stems are listed in order and leaves go to the right of the bar in the corresponding row. Using ones as stems changes the place-value split, reversing stem order violates the arrangement, and unsorted leaves do not follow the display procedure.

5. A researcher groups measured test scores into equal-width intervals, and every adjacent interval has a positive frequency. What should the histogram bars look like?

Separated bars whose widths vary with the interval frequencies
Separated equal-width bars with heights showing frequency or relative frequency
Adjacent equal-width bars with heights showing frequency or relative frequency
Adjacent bars whose widths vary with the interval frequencies

Adjacent equal-width bars with heights showing frequency or relative frequency

Explanation

A histogram uses equal-width class intervals, with bar height representing frequency or relative frequency; adjacent bars touch unless a class has zero frequency. Separated bars apply the categorical-bar convention, while variable widths misrepresent equal-width bins and gaps are not justified when every class has observations.

6. In a survey of teenage smoking rates across 36 European countries, which description best summarizes the distribution?

Rates are typically in the 20s or 30s, span 10% to 43%, and are approximately bell-shaped.
Rates are typically in the 10s or 40s, span 20% to 30%, and are approximately bell-shaped.
Rates are typically in the 10s or 40s, span 10% to 43%, and are strongly left-skewed.
Rates are typically in the 20s or 30s, span 20% to 30%, and are strongly right-skewed.

Rates are typically in the 20s or 30s, span 10% to 43%, and are approximately bell-shaped.

Explanation

The country rates are typically in the 20s or 30s, range from 10% to 43%, and have an approximately bell-shaped distribution. The other descriptions confuse typical rates with extremes, narrow the range, or replace the stated shape with skewness.

7. A histogram of a new data set appears symmetric, with no visible skew. Which relationship between its mean and median should you expect?

The mean is greater than the median.
The mean and median are equal.
The median is twice the mean.
The mean is less than the median.

The mean and median are equal.

Explanation

For a symmetric distribution, the mean and median are equal. The greater-than relationship describes right skew, the less-than relationship describes left skew, and symmetry does not imply a doubled median.

8. A company has employee salaries of $30,000, $32,000, $34,000, and $104,000. Which value is the mean salary, the balance point calculated using every salary?

$33,000
$32,000
$50,000
$200,000

$50,000

Explanation

The mean uses every observation: the salaries sum to $200,000, and dividing by 4 gives $50,000. $33,000 is the median, $32,000 omits the high salary's effect, and $200,000 is the sum rather than the mean.

9. A student's ordered quiz scores are 12, 15, 18, 22, 27, and 40. What is the median score?

22.33
18
22
20

20

Explanation

With six observations, the median is the average of the two middle scores: (18+22)/2=20(18+22)/2=20. Choosing 18 or 22 uses just one middle value, while 22.33 is the mean of all six scores.

10. A café records the most frequently ordered drink category as “tea.” Which measure identifies that category, and can it also be used for numerical data?

The mean; it can be used for both qualitative and quantitative data.
The median; it can be used for both qualitative and quantitative data.
The mode; it can be used for quantitative data but not categories.
The mode; it can be used for both qualitative and quantitative data.

The mode; it can be used for both qualitative and quantitative data.

Explanation

The mode is the value or category occurring most often and can describe qualitative as well as quantitative data. The median identifies a middle value, the mean is a balance point, and excluding categories incorrectly limits the mode.

11. Two datasets have the same minimum and maximum values, but one has most observations clustered near the mean while the other is more widely distributed. What can their ranges tell you?

Their ranges are equal, but the ranges do not show how the observations are distributed.
Their ranges identify which dataset has the greater variation about the mean.
Their ranges differ because one dataset is more tightly clustered around the mean.
Their ranges show that the datasets have identical distributions.

Their ranges are equal, but the ranges do not show how the observations are distributed.

Explanation

The range uses only the largest and smallest observations, so equal endpoints give equal ranges even when the distributions differ. A standard deviation reflects variation about the mean; clustering is not captured by the range, and equal ranges do not establish identical distributions.

12. Which feature makes variance a measure of dispersion rather than a measure of central tendency?

It considers how observations are distributed around the mean.
It reports the difference between the largest and smallest observations.
It identifies the value that balances the observations.
It counts how often the most common observation occurs.

It considers how observations are distributed around the mean.

Explanation

Variance describes dispersion by considering how data are distributed around the mean. The largest-minus-smallest difference is the range, the balancing value is the mean, and the most frequent value is the mode.

13. Two groups have the same average score, but Group A has a larger standard deviation than Group B. What does this indicate about their scores?

Group A’s scores are more concentrated around the mean.
Group A’s scores are more spread out around the mean.
Group A’s mean is higher than Group B’s mean.
Group A’s largest-to-smallest difference is necessarily greater.

Group A’s scores are more spread out around the mean.

Explanation

A larger standard deviation indicates more spread-out data, describing variation about the mean. It does not imply a different mean or necessarily a larger range, and it does not indicate greater concentration.

14. A researcher wants to compare the size of the standard deviation with the average value, rather than consider the spread on its own. Which measure should be used?

The variance.
The mean.
The coefficient of variation.
The range.

The coefficient of variation.

Explanation

The coefficient of variation compares the standard deviation with the mean to assess the spread’s relative size. Variance measures dispersion, the mean measures central tendency, and the range is based on the extreme observations.

15. A sample has a standard deviation of 6 and a mean of 24. Using the sample coefficient-of-variation formula, what value should be reported?

0.25
30
4
18

0.25

Explanation

For sample data, the coefficient of variation is the standard deviation divided by the mean: 624=0.25\frac{6}{24}=0.25. The value 4 comes from inverting the ratio, while 18 and 30 result from subtracting or adding the quantities.

16. A data set has a mean of 50 and a standard deviation of 4. Using Chebyshev’s Rule with k=2k=2, what minimum proportion of the data is guaranteed to lie from 42 to 58?

At least 75%
Approximately 95%
At most 75%
At least 88.9%

At least 75%

Explanation

Chebyshev’s Rule guarantees at least 1−1k21-\frac{1}{k^2} of the data within kk standard deviations; for k=2k=2, this is 1−14=341-\frac{1}{4}=\frac{3}{4}, or 75%. The 95% figure comes from the Empirical Rule, 88.9% is the Chebyshev bound for three deviations, and “at most” reverses the guarantee.

17. A distribution is unimodal and symmetric but has a distinctly non-bell-shaped form. Which rule can be used to make a guaranteed statement about the proportion within a chosen number of standard deviations?

Chebyshev’s Rule, because it does not require a bell-shaped distribution
Neither rule, because both require a bell-shaped distribution
The Empirical Rule, because its percentages are guaranteed for any shape
The Empirical Rule, because unimodality and symmetry are sufficient

Chebyshev’s Rule, because it does not require a bell-shaped distribution

Explanation

Chebyshev’s Rule provides a bound without requiring a bell-shaped distribution; the Empirical Rule requires data that are unimodal, symmetric, and bell-shaped. The Empirical Rule conditions are not met here, its percentages are approximate rather than distribution-free guarantees, and a bell-shaped form is not required for Chebyshev’s Rule.

18. A sample has mean xˉ=80\bar{x}=80 and standard deviation s=5s=5. What is the z-score for an observation of x=72x=72?

−1.6-1.6
−0.625-0.625
−8-8
1.61.6

$$-1.6$$

Explanation

For a sample, z=x−xˉsz=\frac{x-\bar{x}}{s}, so z=72−805=−1.6z=\frac{72-80}{5}=-1.6. Reversing the subtraction gives a positive score, omitting division gives the raw difference, and dividing the standard deviation by the difference produces the reciprocal-style error.

19. A measurement has a z-score of −1.2-1.2. Which description correctly interprets the z-score’s units and location?

It places the measurement below 1.2% of the data
It is 1.2 standard deviations below the mean, with no unit
It is 1.2 standard deviations above the mean, with no unit
It is 1.2 units below the mean, measured in the variable’s units

It is 1.2 standard deviations below the mean, with no unit

Explanation

A z-score locates a measurement in standard-deviation units and has no unit; a negative value indicates a position below the mean. Treating it as raw measurement units ignores standardization, placing it above the mean reverses the sign’s meaning, and a z-score is not a percentile.

20. In a group of test scores, what does the 80th percentile represent?

A value with 80% of the scores below it and 20% above it
A value with 20% of the scores below it and 80% above it
A score that 80% of the group earned exactly
A value with half the scores below it and half above it

A value with 80% of the scores below it and 20% above it

Explanation

The 80th percentile is a value below which 80% of the data fall and above which 20% fall. Reversing those proportions misreads the percentile, interpreting it as an exact-score frequency confuses position with frequency, and an even split describes the median.

21. In an ordered dataset, what does the third quartile, Q3Q_3, represent?

The 75th percentile
The 50th percentile
The 33rd percentile
The 25th percentile

The 75th percentile

Explanation

Quartiles divide ordered data into four quarters, and Q3Q_3 marks the 75th percentile. The 25th percentile is Q1Q_1, the 50th percentile is the median, and dividing data into thirds describes a different partition.

22. For a dataset on teenage smoking, Q1=21%Q_1=21\% and Q3=35%Q_3=35\%. What does the resulting interquartile range tell you?

The middle half spans 14 percentage points
The upper quartile is 14% higher than the lower quartile
The median is 14 percentage points above the lower quartile
The full dataset spans 14 percentage points

The middle half spans 14 percentage points

Explanation

The IQR is the difference between the third and first quartiles: 35−21=1435-21=14 percentage points, describing the spread of the middle 50%. The full range uses the minimum and maximum, while a relative percentage change or median comparison is not what the IQR measures.

23. A measurement has a z-score of −2.6-2.6. How should it be classified under the z-score rule?

Not an outlier because the score is negative
An extreme outlier
An outlier, but not an extreme outlier
An outlier only if the score is positive

An outlier, but not an extreme outlier

Explanation

Classification uses the absolute z-score: ∣−2.6∣=2.6|-2.6|=2.6, which exceeds 2 but not 3. Calling it extreme confuses the threshold of 3 with the outlier threshold, while the sign does not determine whether it qualifies.

24. Which description identifies the main components of a box plot?

A box from the minimum to the maximum, with quartiles shown as whisker endpoints
A box from Q1Q_1 to Q3Q_3, a median line, and whiskers to the most extreme values within the fences
A box from Q1Q_1 to Q3Q_3, with whiskers ending at the fence boundaries
A frequency bar for each value, with the median marked by the tallest bar

A box from $$Q_1$$ to $$Q_3$$, a median line, and whiskers to the most extreme values within the fences

Explanation

A box plot displays the five-number summary with a box spanning Q1Q_1 to Q3Q_3, a median line, and whiskers reaching the most extreme observed values within the fences. A frequency display is a different graph, the box does not span the full range, and whiskers end at eligible data values rather than at the fence boundaries.

25. A single unusually large observation is added to a dataset. Which pair of measures is generally more resistant to the resulting change?

Median and interquartile range
Median and standard deviation
Mean and interquartile range
Mean and standard deviation

Median and interquartile range

Explanation

The median and IQR are based on positions in the ordered data and are resistant to extreme values. Mean and standard deviation are sensitive to extremes; the mixed pairs combine one measure from each group.

26. A distribution of commute times has two distinct clusters and several outliers. Which measures should be used to describe its center and spread?

Median and standard deviation
Mean and standard deviation
Mean and interquartile range
Median and interquartile range

Median and interquartile range

Explanation

For a distribution with clusters or outliers, use the median and IQR rather than the mean and standard deviation. The mean-based pair is sensitive to extremes, while each mixed pair includes one measure from that sensitive group.

Study with flashcards

Lock in the answers with 80 flashcards on Statistics for Management.

What does a table of counts list for each category?

The number of observations in it.

How are category counts in a table of counts obtained?

By tallying responses.

What may a table of counts display besides counts?

Percentages.

See the flashcards →

Read the study guide

Go over the full study guide for Statistics for Management.

Read the study guide →

Related classes

Make your own practice quizzes

Upload your class notes and Revizly writes a practice quiz with explained answers in about a minute.

Quiz maker