★ Must-know
Further detail
The standard enthalpy of formation of C₂H₂(g) is 230 kJ mol⁻¹, and that of C₆H₆(g) is 83 kJ mol⁻¹.
For the combustion of CH₄(g), ΔH°rxn is −889.1 kJ; ΔH°f for H₂O(l) is −285.8 kJ/mol and for CO₂(g) is −393.3 kJ/mol.
The combustion equation C₆H₁₄(g) + 19/2 O₂(g) → 6 CO₂(g) + 7 H₂O(g) has ΔH°rxn ≈ −3887 kJ.
The reaction 2 H₂(g) + O₂(g) → 2 H₂O(g) is evaluated using average bond enthalpies listed as 500 kJ/mol for H–H, O=O, and H–O bonds.
📌 The enthalpy change on a reaction energy diagram is the vertical energy difference between the reactant and product levels, not the distance to the transition state.
Reactants to products show ΔH; the transition state marks the energy barrier.
★ Must-know
📐 Formula - The heat exchanged by a sample is calculated as .
📌 In a perfectly insulated calorimeter, heat lost by one part of the system equals heat gained by another part.
Further detail
In the AgNO₃–NaCl calorimetry example, 50.0 mL of each 0.100 M solution is mixed at 20.0°C; the mixture has mass 100. g, specific heat 4.2 J/(g °C), and final temperature 21.0°C.
In the HCN–NaOH calorimetry example, 100.0 mL of 1.0 M HCN and 100.0 mL of 0.50 M NaOH warm from 21.5°C to 28.5°C; the mixture has specific heat approximately 4.2 J/g°C and density 1 g/mL.
The specific heat capacities are:
In an insulated container, heat lost by the hot material equals heat gained by the cooler material.
★ Must-know
📌 During a phase change at constant pressure, added heat changes the substance's potential energy while its temperature remains constant.
📌 During boiling, energy separates NH₃ molecules by breaking intermolecular hydrogen bonds; it does not break the N–H covalent bonds within the molecules.
Further detail
For water, the heats of fusion and solidification are 334 J/g and −334 J/g, and the heats of vaporization and condensation are 2257 J/g and −2257 J/g, respectively.
The specific heat capacities are:
The heat of vaporization of benzene at its boiling point of 80.1 °C is 30.8 kJ/mol.
During a phase change, heat changes potential energy rather than raising temperature.
★ Must-know
📌 When calcium chloride dissolves in water and the temperature rises, hydration energy released by interactions between water molecules and solute ions exceeds the energy required to separate the ionic lattice.
Further detail
The enthalpy of solution of LiBr(s) is −23.26 kJ/mol.
Dissolving 5.0 g of NH₃ClO₄(s) in 100. mL of water lowers the solution temperature by 3.0°C.
Dissolving 1.92 g of KBr(s) in 100 g of water in an insulated vessel lowers the water temperature by 0.766°C.
Hydration releases energy; separating the ionic lattice requires energy.
★ Must-know
Heating a solid through melting and boiling proceeds from solid warming, to melting at constant temperature, to liquid warming, to boiling at constant temperature, and then to gas warming.
The photosynthesis reaction 6 CO₂(g) + 6 H₂O(l) → C₆H₁₂O₆(s) + 6 O₂(g) has ΔH = +2800 kJ/mol and is endothermic, transferring thermal energy from the surroundings to the reaction.
Further detail
The reaction H₂(g) + F₂(g) → 2 HF(g) has an enthalpy change of −540 kJ; because it forms two moles of HF, the heat of formation per mole of HF is half the reaction enthalpy.
The combustion of hydrogen, 2 H₂(g) + O₂(g) → 2 H₂O(g), has ΔH = −483 kJ/molrxn.
For 4 H(g) → 2 H₂(g), ΔH is −869.6 kJ, so forming two H–H bonds releases 869.6 kJ in total.
The nitric-acid and calcium-hydroxide calorimetry exercise uses 80.0 mL of 1.15 M HNO₃ and 70.0 mL of 1.27 M Ca(OH)₂, both initially at 22.0°C, and reaches 58.5°C.
Take a 12-question practice quiz on Thermochemistry and Calorimetry, with every answer explained.
1. A student supplies energy to break a particular chemical bond, then considers formation of that same bond in another process. Which energy description is correct?
2. On a reaction energy diagram, the reactants and products lie at different energy levels, and the curve rises to a peak between them. Which vertical difference represents the reaction enthalpy change?
Memorize the key concepts of Thermochemistry and Calorimetry with 40 flashcards.
How is standard reaction enthalpy calculated from standard formation enthalpies?
Sum the product formation enthalpies and subtract the reactant formation enthalpies, each multiplied by its stoichiometric coefficient.
What energy does bond enthalpy measure?
The energy required to break a chemical bond.
How does forming a bond compare energetically with breaking the same bond?
It releases energy of equal magnitude and opposite sign.
Upload your class notes and Revizly writes a study guide, a quiz and flashcards in about a minute.
Study guide maker