Thermochemistry and Calorimetry Practice Quiz (12 questions)

All questions and answers

1. A student supplies energy to break a particular chemical bond, then considers formation of that same bond in another process. Which energy description is correct?

Breaking absorbs energy; forming releases an equal amount
Breaking absorbs energy; forming releases a different amount
Breaking releases energy; forming absorbs an equal amount
Both breaking and forming release energy

Breaking absorbs energy; forming releases an equal amount

Explanation

Bond enthalpy is the energy required to break a bond, and forming that same bond releases energy of equal magnitude with the opposite sign. The claim that breaking releases energy reverses the sign, and the claim of a different magnitude misses the equal-magnitude relationship.

2. On a reaction energy diagram, the reactants and products lie at different energy levels, and the curve rises to a peak between them. Which vertical difference represents the reaction enthalpy change?

The difference between product and reactant energy levels
The difference between the peak and reactant energy levels
The full rise from reactants to the peak and back to products
The difference between the peak and product energy levels

The difference between product and reactant energy levels

Explanation

Reaction enthalpy is the vertical energy difference between the reactant and product levels. The reactant-to-peak and product-to-peak distances describe activation barriers, not the enthalpy change.

3. A hot metal sample and cooler water are placed in a perfectly insulated calorimeter. If the metal loses 420 J of heat, how much heat does the water gain?

A negative 420 J
420 J
0 J
Less than 420 J

420 J

Explanation

In a perfectly insulated calorimeter, heat lost by one part equals heat gained by another, so the water gains 420 J. Zero heat transfer confuses insulation with no exchange within the system; heat loss by the water reverses the direction; a smaller amount violates energy conservation.

4. A 25.0 g sample with a specific heat of 0.80 J/(g °C)0.80\ \text{J/(g °C)} warms from 20.0 °C to 30.0 °C. How much heat does it absorb?

−200 J
200 J
8.0 J
400 J

200 J

Explanation

Use q=mcΔTq = mc\Delta T with ΔT=30.0−20.0=10.0 ∘C\Delta T = 30.0 - 20.0 = 10.0\ ^\circ\text{C}: q=25.0×0.80×10.0=200 Jq = 25.0 \times 0.80 \times 10.0 = 200\ \text{J} absorbed. Using the initial temperature gives 400 J, omitting mass gives 8.0 J, and a negative value assigns the wrong sign to warming.

5. Liquid ammonia boils at constant pressure. Which molecular change occurs as it vaporizes?

Nitrogen and hydrogen atoms form different molecules.
Hydrogen bonds between NH₃ molecules are overcome.
N–H covalent bonds within NH₃ molecules are broken.
The molecules gain enough speed to raise the temperature.

Hydrogen bonds between NH₃ molecules are overcome.

Explanation

Boiling separates ammonia molecules by overcoming intermolecular hydrogen bonds; it does not break the N–H covalent bonds within each molecule. Breaking N–H bonds confuses intermolecular and covalent bonds, a temperature rise mischaracterizes energy use during boiling, and forming different molecules describes a chemical change.

6. A pure substance is boiling at constant pressure while heat is steadily supplied. What happens to its temperature and potential energy during this phase change?

Temperature increases while potential energy remains constant.
Both temperature and potential energy remain constant.
Both temperature and potential energy increase.
Temperature remains constant while potential energy increases.

Temperature remains constant while potential energy increases.

Explanation

During a phase change at constant pressure, added heat changes the substance's potential energy while its temperature remains constant. A rising temperature applies the behavior of heating within a single phase, unchanged potential energy overlooks the energy used to change phase, and no change in either quantity ignores the supplied heat.

7. When calcium chloride dissolves in water, the solution warms. Which energy relationship explains this temperature increase?

Hydration requires more energy than lattice separation requires
Lattice separation releases more energy than hydration releases
Breaking water-molecule bonds releases more energy than hydration
Hydration releases more energy than lattice separation requires

Hydration releases more energy than lattice separation requires

Explanation

The solution warms because hydration releases energy, and that energy exceeds the energy needed to separate the ionic lattice. Saying lattice separation releases energy reverses its role; saying hydration requires more energy predicts cooling; breaking water-molecule bonds confuses hydration with covalent bond breaking.

8. A student dissolves 5.0 g of NH₃ClO₄(s) in 100. mL of water. What temperature change should the student observe?

A decrease of 3.0°C
An increase of 0.766°C
An increase of 3.0°C
A decrease of 0.766°C

A decrease of 3.0°C

Explanation

Dissolving this amount of NH₃ClO₄ in 100. mL of water lowers the solution temperature by 3.0°C. An increase reverses the observed direction, while 0.766°C is the temperature drop associated with the separate KBr example.

9. A photosynthesis reaction occurs with ΔH = +2800 kJ/mol. Which direction does thermal energy transfer, and how is the reaction classified?

From the reaction into the surroundings; exothermic
From the surroundings into the reaction; exothermic
From the reaction into the surroundings; endothermic
From the surroundings into the reaction; endothermic

From the surroundings into the reaction; endothermic

Explanation

A positive enthalpy change identifies an endothermic reaction, which takes in thermal energy from the surroundings. Transfer to the surroundings describes heat release, and labeling that transfer endothermic confuses the direction of heat flow with the reaction classification.

10. A sample is heated continuously from solid to gas, passing through both its melting point and boiling point. Which sequence describes its temperature behavior?

Solid warms, melting occurs at constant temperature, liquid warms, boiling occurs at constant temperature, then gas warms
Solid warms, liquid warms, melting occurs at constant temperature, boiling occurs at constant temperature, then gas warms
Solid warms, melting occurs as temperature rises, liquid warms, boiling occurs at constant temperature, then gas warms
Solid warms, melting occurs at constant temperature, liquid warms, gas warms, then boiling occurs at constant temperature

Solid warms, melting occurs at constant temperature, liquid warms, boiling occurs at constant temperature, then gas warms

Explanation

Heating proceeds through solid warming, melting at constant temperature, liquid warming, boiling at constant temperature, and gas warming. Warming the liquid before melting finishes misorders the stages, while temperature rises during a phase change or gas warming before boiling contradicts the sequence.

11. Using the thermochemical equation C6H14(g)+192O2(g)→6CO2(g)+7H2O(g)\mathrm{C_6H_{14}(g) + \frac{19}{2}O_2(g) \rightarrow 6CO_2(g) + 7H_2O(g)} with ΔHrxn∘≈−3887 kJ\Delta H^\circ_{\mathrm{rxn}} \approx -3887\ \mathrm{kJ}, what enthalpy change accompanies combustion of 2.00 mol of hexane?

Approximately +7774 kJ+7774\ \mathrm{kJ}
Approximately −3887 kJ-3887\ \mathrm{kJ}
Approximately −7774 kJ-7774\ \mathrm{kJ}
Approximately −73,853 kJ-73{,}853\ \mathrm{kJ}

Approximately $$-7774\ \mathrm{kJ}$$

Explanation

The equation’s enthalpy applies to combustion of 1 mol of hexane, so 2.00 mol releases 2.00×(−3887)≈−7774 kJ2.00\times(-3887)\approx-7774\ \mathrm{kJ}. The unscaled value omits the amount factor, the positive value reverses the exothermic sign, and the oxygen-coefficient value applies the wrong stoichiometric amount.

12. Equal masses of wood, aluminum, glass, and copper receive the same amount of heat and undergo no phase changes. Which material has the greatest temperature increase?

Aluminum
Glass
Wood
Copper

Copper

Explanation

For equal masses receiving equal heat, temperature rise is inversely related to specific heat; copper has the smallest listed specific heat, 0.092 cal/(g °C), so it warms the most. Glass and aluminum have larger specific heats, while wood has the largest and therefore the smallest temperature increase.

Study with flashcards

Lock in the answers with 40 flashcards on Thermochemistry and Calorimetry.

How is standard reaction enthalpy calculated from standard formation enthalpies?

Sum the product formation enthalpies and subtract the reactant formation enthalpies, each multiplied by its stoichiometric coefficient.

What energy does bond enthalpy measure?

The energy required to break a chemical bond.

How does forming a bond compare energetically with breaking the same bond?

It releases energy of equal magnitude and opposite sign.

See the flashcards →

Read the study guide

Go over the full study guide for Thermochemistry and Calorimetry.

Read the study guide →

Related classes

Make your own practice quizzes

Upload your class notes and Revizly writes a practice quiz with explained answers in about a minute.

Quiz maker