★ Must-know
Rotary motion follows a circular path and is measured in revolutions per minute (rpm).
Linear motion travels in one direction along a straight line, and speed is measured by dividing distance travelled by time taken.
Further detail
Oscillating motion moves back and forth along a circular path and is measured in oscillations per minute (opm).
Reciprocating motion moves back and forth in a straight line and is measured in oscillations per minute (opm).
Rotary follows a circle; linear follows a straight line.
★ Must-know
A cam changes rotary motion into reciprocating motion.
In a simple gear train, the smaller gear rotates faster than the larger gear, and the gears rotate in opposite directions.
A lever can reduce the distance moved while increasing the force exerted, or increase the distance moved while reducing the force exerted.
Further detail
📌 In a gear train, the driver gear is the input and the driven gear is the output.
A belt transmits power from one pulley to another and can be used for power transmission over long distances.
A car jack uses a lever to lift a heavy object, but the person must move the lever much farther than the car is lifted.
The driver supplies the input; the driven gear or pulley receives it as output.
★ Must-know
The three subsystems are:
Circuit input examples include:
Output examples include:
Further detail
Input → Process → Output
★ Must-know
Hardwoods include oak, birch and beech, and are durable, hard-wearing, dense and strong in small sections, with an attractive grain.
Manufactured boards include MDF, chipboard and plywood; they are made in large boards without faults or knots and are cheaper to cut than solid wood, while MDF can be finished with paint or veneer.
Thermosetting polymer examples are:
Ferrous metals contain iron, are magnetic and generally rust, and are resistant to wear; stainless steel is an exception to rusting.
Further detail
Softwoods include pine, spruce and cedar, and they are easy to work or machine and have an attractive grain.
Thermoplastics such as acrylic and PVC can be moulded easily, come in a range of colours and withstand wear and tear.
PLA is a biopolymer that can be moulded easily, is tough and strong, and biodegrades.
Non-ferrous metals such as aluminium and copper are lightweight, have a good strength-to-weight ratio, resist corrosion and are easy to clean.
Examples of paper and board are:
Cotton is cool and lightweight to wear, while wool is warm and crease-resistant; both can be dyed, mould to shape and are soft and comfortable.
Synthetic textiles such as polyester, nylon and Lycra are strong, durable, lightweight, available in a range of colours, easy to clean, comfortable and mould to shape, but are not inherently waterproof.
★ Must-know
The six Rs are:
Fair Trade supports:
Further detail
Rethinking materials and processes can support more sustainable and ethical design decisions.
Refusing harmful materials can improve sustainability; the course example contrasts microplastic pollution from plastic straws with switching to paper or card straws.
Reusing materials already in circulation avoids extracting new raw materials, and products can also be reused for another purpose, such as using old bean tins as plant pots.
Recycling breaks materials down to make new products, but some products are difficult to separate and recycle, so materials can end up in landfill.
Reducing product size or the distance materials travel, called product miles, can reduce CO₂ emissions.
Making a product repairable lets users fix it when it breaks, avoiding the need to buy a replacement and reducing material use.
Designers may want consumers to buy new products because this makes companies more money, but the course describes this as a poor moral decision for sustainability.
★ Must-know
📌 A circular economy, or cradle to cradle, uses recycled sources or recycles a product at the end of use instead of sending it to landfill.
📌 A linear economy, or cradle to grave, takes materials, makes a product and disposes of it in landfill at the end of use.
Further detail
Cradle to cradle returns materials to use; cradle to grave ends in disposal.
★ Must-know
AI can help industry predict sales and trends, target personalised advertisements, and analyse machine-sensor data to predict maintenance needs before parts break.
Industrial robots can work without breaks, performing tasks faster and more accurately than humans, including moving large amounts of warehouse stock.
Home CAD and CAM enable people to design and manufacture high-specification products for sale without a supplier middleman, while Kickstarter can raise funds for manufacturing an idea.
Additive manufacture can 3D-print materials including polymers, metals, carbon fibre, and biomaterials such as cells, enabling rapid manufacture, consistent results, and quick modifications.
The Internet of Things connects devices so they can be controlled over the internet through apps or voice control, including devices such as Alexa, Ring, Philips Hue, Hive, IKEA smart-home products, printers, and gaming devices.
Designers and manufacturers can use 3D printing for quicker, customised manufacture, virtual reality to test products before manufacture and train staff, AI to predict market and customer activity, and robotics to increase manufacturing speed and reduce waste.
Further detail
Economies of scale can be achieved by: producing parts overseas, buying standard components in bulk, manufacturing parts in different places before assembling them in the UK
AI requires large amounts of electricity and water to run and cool servers continuously.
Although robots are expensive initially, fewer errors can reduce waste and their continuous operation can lower costs over time.
Biometrics use fingerprint and facial scanners for authentication at airport check-ins and immigration border control, speeding up and making the process more thorough.
People use biometrics to unlock computers and phones and to access online banking and payment systems.
3D printing can create personalised products from body scans, including trainers and implants.
People can use 3D printing to make replacement parts or whole products and repair products, including by downloading designs from libraries such as Thingiverse.
The polymer often used in 3D printing is PLA, a biodegradable biopolymer.
★ Must-know
Buxton natural mineral water bottles are made from 100% recycled plastic, excluding caps and labels.
Conventional polymer is made from crude oil, a finite resource, and is therefore unsustainable.
Bamboo is a strong, versatile alternative to softwood and reaches maturity in 3 to 5 years, whereas softwood trees such as pine take 20 to 50+ years to grow large enough to harvest.
🔄 Bike Club’s subscription cycle works as follows:
Further detail
McDonald’s rethought its straws and refused plastic, changing to a more sustainable card material.
Buxton makes its bottle caps and labels recyclable after use to reduce waste.
Biopolymers such as PLA are made from plant starch and are biodegradable; they are used in packaging, 3D printing, and some water bottles. PlantBottle, however, is made from plant-based PET, not PLA, and is not biodegradable.
📌 PLA made from plant starch is presented as more sustainable than oil-derived polymer because plant starch is used instead of a finite oil resource.
📌 When timber is needed, it should come from a sustainably managed forest where another tree is planted for every tree cut down.
99.5% of IKEA timber is sourced from FSC forests.
Tesla rethought energy sourcing by refusing finite resources and powering its factory with solar and wind energy.
Nike reduced the cardboard used in delivery boxes by 50% through redesign and refuses raw cardboard, using only recycled cardboard.
Beeswax food wraps can be reused repeatedly instead of single-use foil or cling film, reducing waste.
Fairphone devices allow users to repair parts such as the camera and battery at home without specialist intervention, helping reduce electrical waste.
Unwrapped stores reduce packaging waste by letting customers refill empty containers with products such as cereal, pasta, and shampoo.
★ Must-know
📌 Isometric projection has no horizontal lines and uses axes shown at 30° on either side.
📌 Before producing a technical drawing, check the scale and dot spacing because questions may provide 10 mm or 5 mm grids.
Further detail
Third-angle projection is commonly drawn on square grid paper marked with dots or lines to help keep elevations aligned.
Isometric paper can be printed with lines or dots, and both types are used to draw three-dimensional isometric projections.
📌 Technical drawings should be completed with a pencil and ruler rather than in a freehand sketch style.
Take a 32-question practice quiz on Emerging Technologies and Sustainable Design, with every answer explained.
1. A small robot travels 18 metres along a straight corridor in 6 seconds. How should its motion and speed be described?
2. A component must be made from a polymer that can be moulded into shape but will not reshape if heated later. Which category should the designer choose?
Memorize the key concepts of Emerging Technologies and Sustainable Design with 70 flashcards.
What path does rotary motion follow?
A circular path.
How is rotary motion measured?
In revolutions per minute (rpm).
In what direction and path does linear motion travel?
In one direction along a straight line.
Upload your class notes and Revizly writes a study guide, a quiz and flashcards in about a minute.
Study guide maker