Emerging Technologies and Sustainable Design Practice Quiz (32 questions)

All questions and answers

1. A small robot travels 18 metres along a straight corridor in 6 seconds. How should its motion and speed be described?

Linear motion at 3 metres per second
Rotary motion at 3 revolutions per minute
Reciprocating motion at 3 oscillations per minute
Linear motion at 108 metres per second

Linear motion at 3 metres per second

Explanation

Linear motion travels in one direction along a straight line, and speed is distance divided by time: 18 ÷ 6 = 3 metres per second. Rotary motion follows a circle, while reciprocating motion moves back and forth in a straight line.

2. A component must be made from a polymer that can be moulded into shape but will not reshape if heated later. Which category should the designer choose?

A thermosetting polymer such as epoxy resin
A thermoplastic such as PVC
A thermoplastic such as acrylic
A non-ferrous metal such as aluminium

A thermosetting polymer such as epoxy resin

Explanation

Thermosetting polymers can be moulded easily but do not reshape when heated. Thermoplastics such as acrylic and PVC can be reshaped when heated, while aluminium is a metal rather than a polymer.

3. A programmable chip in a washing machine reads a water-level sensor and controls a motor. What is the chip’s role?

An input device that starts the system’s events
A sensor that detects the water level
An output device that produces movement
A microcontroller that reads inputs and controls outputs

A microcontroller that reads inputs and controls outputs

Explanation

A microcontroller is programmed for a specific use and reads inputs while controlling outputs. Calling it an input confuses processing with event initiation, while the motor is an output and the water-level sensor is an input.

4. A garden-light circuit uses an LDR to detect falling light levels and begin its programmed response. What role does the LDR play?

An output that produces light for the circuit
A light source that signals the circuit to start
An input that starts the circuit’s events
A processor that decides when the light turns on

An input that starts the circuit’s events

Explanation

An input such as an LDR starts the circuit’s chain of events by detecting a condition. Treating it as an output confuses sensing with producing light; the microcontroller performs processing, and the lamp is the light-producing output.

5. A clothing company selects Fair Trade cotton from developing-country farmers and workers. Which ethical benefit does this sourcing decision support?

Reduced demand for newly extracted raw materials
Fair wages, safe working conditions, and community development
Longer product use through repair and maintenance
Lower transport emissions and shorter material routes

Fair wages, safe working conditions, and community development

Explanation

Fair Trade sourcing supports fair wages, safe working conditions, and community development for farmers and workers in developing countries. Shorter routes concern transport impacts, recycled inputs reduce raw-material extraction, and repairability extends product use.

6. A small alarm needs a component that converts an electrical signal into an audible warning. Which circuit output best fits this task?

A buzzer
An LED
A motor
A microphone

A buzzer

Explanation

A buzzer is an output that produces sound. An LED produces light, a motor produces movement, and a microphone is an input that detects sound.

7. Which sequence lists the five stages used to assess a product life cycle?

Raw material extraction, distribution, manufacturing, use, disposal or recycling
Disposal or recycling, manufacturing, distribution, use, raw material extraction
Raw material extraction, manufacturing, distribution, design, disposal or recycling
Raw material extraction, manufacturing, distribution, use, disposal or recycling

Raw material extraction, manufacturing, distribution, use, disposal or recycling

Explanation

The five stages are raw material extraction, manufacturing, distribution, use, and disposal or recycling. Distribution follows manufacturing, use is a distinct stage, and disposal or recycling comes at the end.

8. A designer wants a metal that contains iron and resists wear, but the product must also avoid rusting. Which material meets the rusting exception?

Copper
Cast iron
Low carbon steel
Stainless steel

Stainless steel

Explanation

Ferrous metals contain iron and generally rust, but stainless steel is specifically an exception to rusting. Low carbon steel and cast iron are listed as ferrous metals, while copper is non-ferrous and does not contain iron.

9. A factory uses machine-sensor data to identify when a component is likely to fail, allowing maintenance before a breakdown. Which use of AI is this?

Predicting maintenance needs
Targeting personalised advertisements
Analysing post-breakdown failures
Predicting sales trends

Predicting maintenance needs

Explanation

AI can analyse machine-sensor data to predict maintenance needs before parts break. Sales forecasting and personalised advertising are other AI applications, while post-breakdown analysis comes after the preventive prediction described.

10. Two meshing gears form a simple gear train. Gear A is smaller than Gear B; how do their rotation speeds and directions compare?

Gear A rotates faster than Gear B, and they turn in opposite directions
Gear A rotates slower than Gear B, and they turn in opposite directions
Gear A rotates faster than Gear B, and they turn in the same direction
The gears rotate at the same speed, and they turn in opposite directions

Gear A rotates faster than Gear B, and they turn in opposite directions

Explanation

In a simple gear train, the smaller gear rotates faster than the larger one, and the gears turn in opposite directions. The alternatives each reverse the speed relationship, the direction relationship, or both.

11. Why is conventional polymer considered unsustainable in this material choice?

It is made from recycled paper, a finite resource.
It is made from plant starch, a finite resource.
It is made from crude oil, a renewable resource.
It is made from crude oil, a finite resource.

It is made from crude oil, a finite resource.

Explanation

Conventional polymer is made from crude oil, which is finite, making it an unsustainable resource choice. Plant starch is associated with biopolymers, crude oil is not renewable, and recycled paper is not the stated source of conventional polymer.

12. A designer is describing how an electronic system is organised. Which sequence names its three subsystems in order?

Input, output, input
Input, process, output
Process, input, output
Input, output, process

Input, process, output

Explanation

An electronic system is divided into input, process and output subsystems. Putting output before process reverses the system sequence, while the other alternatives misplace or omit a subsystem.

13. A designer chooses MDF for a large, inexpensive board and wants a painted finish. Which material-specific fact supports that finish?

All manufactured boards can be finished with paint or veneer
MDF can be reshaped by heating
MDF is a solid wood with no knots
MDF can be finished with paint or veneer

MDF can be finished with paint or veneer

Explanation

MDF can be finished with paint or veneer, while the material description does not assign that finish to chipboard or plywood. The other alternatives generalise the MDF detail, confuse finishing with heat reshaping, or misclassify MDF.

14. A student lays out the plan, front, and side elevations of an object using third-angle projection. What should the student do to keep the views correctly positioned?

Arrange the elevations around the front view without matching their edges
Place the elevations independently and use 30° axes to connect them
Align the elevations and use faint pencil guidelines to maintain their positions
Center each elevation separately and use equal grid spacing between them

Align the elevations and use faint pencil guidelines to maintain their positions

Explanation

Third-angle projection requires the plan, front, and side elevations to align, and faint pencil guidelines help preserve that alignment. Using 30° axes confuses the layout with isometric projection, while centering or spacing views independently does not ensure alignment.

15. An exam drawing provides square grid paper with dots spaced 5 mm apart, but a student has practiced on 10 mm grids. What should the student check before drawing?

Use the practiced 10 mm spacing and keep the stated drawing scale
Check the drawing scale and confirm the dots are 5 mm apart
Check the view labels and count dots without checking the scale
Treat each dot interval as the drawing scale and ignore its measurement

Check the drawing scale and confirm the dots are 5 mm apart

Explanation

Before producing a technical drawing, check both its scale and the dot spacing, since grids may use different intervals such as 5 mm or 10 mm. Assuming 10 mm ignores the supplied grid, while checking labels or substituting spacing for scale leaves one of the required checks undone.

16. A wheel turns continuously around its axle, and its rotation rate is recorded. Which motion type and unit match this movement?

Oscillating motion, measured in oscillations per minute (opm)
Linear motion, measured by distance divided by time
Reciprocating motion, measured in oscillations per minute (opm)
Rotary motion, measured in revolutions per minute (rpm)

Rotary motion, measured in revolutions per minute (rpm)

Explanation

Continuous motion along a circular path is rotary motion, measured in revolutions per minute. Linear and reciprocating motion follow straight paths, while oscillating motion moves back and forth along a circular path.

17. Which capability helps industrial robots move large amounts of warehouse stock efficiently?

They can move stock accurately only when people direct every action.
They can design products but need frequent breaks to move stock.
They can work without breaks and move stock quickly and accurately.
They can work continuously but move stock more slowly than people.

They can work without breaks and move stock quickly and accurately.

Explanation

Industrial robots can work without breaks and perform warehouse stock-moving tasks faster and more accurately than humans. Product design is a different task, and the other choices incorrectly add breaks, constant direction, or slower performance.

18. A designer is drawing a three-dimensional object in isometric projection. Which construction approach fits this method?

Use axes at 45° on either side and avoid vertical lines
Use perpendicular axes for the front face and a 30° depth axis
Use axes at 30° on either side and avoid horizontal lines
Use horizontal and vertical axes to define the visible faces

Use axes at 30° on either side and avoid horizontal lines

Explanation

Isometric projection uses axes shown at 30° on either side and has no horizontal lines. Horizontal edges conflict with that rule, perpendicular front-view axes substitute another layout, and 45° axes use the wrong angle.

19. A manufacturer makes a product using recycled materials and collects it after use so its materials can be recycled into new products rather than sent to landfill. Which economy does this describe?

A disposal system ending in landfill
A distribution cycle focused on product delivery
A linear economy, or cradle to grave
A circular economy, or cradle to cradle

A circular economy, or cradle to cradle

Explanation

A circular economy returns materials to use through recycled sources or recycling at the end of a product's use. A linear economy ends with disposal in landfill, while distribution concerns how products are delivered.

20. A lever is redesigned to make its output move a shorter distance. What can happen to the force exerted by the lever?

The force exerted can change only if the input motion becomes rotary
The force exerted can increase
The force exerted must remain unchanged
The force exerted can decrease

The force exerted can increase

Explanation

A lever can reduce the distance moved while increasing the force exerted, illustrating a trade-off between force and distance. The reverse trade-off—greater distance with less force—is also possible; unchanged force misses the stated relationship.

21. Which set correctly names the six Rs of sustainability?

Rethink, Refuse, Reduce, Renew, Repair, and Recycle
Rethink, Refuse, Reduce, Reuse, Recover, and Recycle
Rethink, Reduce, Reuse, Repair, Recycle, and Replace
Rethink, Refuse, Reduce, Reuse, Repair, and Recycle

Rethink, Refuse, Reduce, Reuse, Repair, and Recycle

Explanation

The six Rs are Rethink, Refuse, Reduce, Reuse, Repair, and Recycle. Recover, Renew, and Replace are substitutions or additions that do not belong to this list.

22. A designer needs a strong, versatile material that reaches harvest maturity much sooner than pine. Which material best fits, given its typical maturity period?

Pine, in 20 to 50+ years
Pine, in 3 to 5 years
Bamboo, in 3 to 5 years
Bamboo, in 20 to 50+ years

Bamboo, in 3 to 5 years

Explanation

Bamboo is a strong, versatile alternative to softwood and reaches maturity in 3 to 5 years; pine takes 20 to 50+ years to grow large enough to harvest. The alternatives either swap the periods or assign the slower period to bamboo.

23. A designer intentionally gives a device a limited useful lifespan based on how long users are expected to keep it before replacing it. What is this practice called?

Design for repair
Life-cycle assessment
Planned obsolescence
Material recycling

Planned obsolescence

Explanation

Planned obsolescence means designing a product with a limited lifespan based on its expected period of use before disposal or replacement. Design for repair concerns fixing products, life-cycle assessment evaluates impacts across stages, and recycling processes materials after use.

24. A craftsperson needs a durable, hard-wearing wood with an attractive grain for a product made from small sections. Which material category best fits?

Softwood such as pine
Manufactured board such as MDF
Thermoplastic such as acrylic
Hardwood such as oak

Hardwood such as oak

Explanation

Hardwoods such as oak are durable, hard-wearing, dense and strong in small sections, and have an attractive grain. Softwood is noted for ease of machining, MDF is manufactured board, and acrylic is a polymer.

25. A machine needs a component that guides forces and movement to a required location and can change the direction of motion. Which component fits this role?

A lever
A cam
A belt
A linkage

A linkage

Explanation

A linkage directs forces and movement where they are needed and can often change the direction of motion. A cam converts rotary motion, a belt transmits power between pulleys, and a lever trades force against distance moved.

26. A new online platform causes many shoppers to stop buying from established high-street stores. What kind of technology does this illustrate?

Established technology
Disruptive technology
Automation technology
Incremental technology

Disruptive technology

Explanation

A disruptive technology unexpectedly displaces an established one, as online shopping can displace in-person high-street shopping. Incremental technology suggests gradual improvement, automation concerns task execution, and established technology is the displaced category.

27. A child outgrows a subscription bike, and the company receives it back, refurbishes it, and sends another bike to the child. How does this cycle reduce material use and waste?

The returned bike is replaced with a newly manufactured bike for each child.
The returned bike is refurbished and passed to another customer.
The returned bike is dismantled and its materials discarded.
The customer keeps the outgrown bike and buys another outright.

The returned bike is refurbished and passed to another customer.

Explanation

Bike Club returns, refurbishes, and passes outgrown bikes to subsequent customers, extending their use and reducing material consumption and waste. Disposal wastes the returned bike, while one-time purchase and repeated new manufacture do not describe the reuse cycle.

28. A packaging designer needs a flat pattern for a small box that can be folded and glued. What should the designer include in the net?

The unfolded faces and glue tabs, but with one face omitted
The assembled box on square grid paper, with visible edges
The unfolded faces on square grid paper, without glue tabs
The unfolded faces on square grid paper, with tabs for gluing

The unfolded faces on square grid paper, with tabs for gluing

Explanation

A box net is made by imagining the box opened flat, drawing its faces on square grid paper, and including tabs for gluing. An assembled view is not a net, omitted tabs prevent the intended gluing, and leaving out a face makes the net incomplete.

29. What proportion of the plastic in Buxton natural mineral water bottles comes from recycled sources, excluding caps and labels?

Partly recycled plastic
Virgin plastic
100% recycled plastic
100% recyclable plastic

100% recycled plastic

Explanation

Buxton natural mineral water bottles are made from 100% recycled plastic when caps and labels are excluded. “Partly recycled” understates the stated content, while recyclability describes whether material can be recycled rather than its source.

30. A manufacturer installs faster machinery and produces more units, lowering the manufacturing cost of each unit. Which concept does this demonstrate?

Bulk purchasing
Reduced production capacity
Higher total expenditure
Economies of scale

Economies of scale

Explanation

Economies of scale occur when increased output through faster production and machinery reduces cost per product. Higher total expenditure mistakes total spending for unit cost, bulk purchasing is a related but distinct cost-saving method, and reduced capacity contradicts the situation.

31. A rotating cam pushes a follower so that the follower repeatedly moves back and forth in a straight line. What motion conversion does the cam provide?

Rotary motion into oscillating motion
Linear motion into reciprocating motion
Reciprocating motion into rotary motion
Rotary motion into reciprocating motion

Rotary motion into reciprocating motion

Explanation

A cam changes rotary motion into reciprocating motion, as the rotating cam drives a back-and-forth straight-line output. Reversing the conversion or describing circular output does not match this mechanism.

32. A company extracts raw materials, makes a product, and sends it to landfill when customers are finished with it. Which model best describes this pathway?

A life-cycle assessment of production impacts
A linear economy, or cradle to grave
A circular economy, or cradle to cradle
A product-use cycle ending in repair

A linear economy, or cradle to grave

Explanation

A linear economy, or cradle to grave, takes materials, makes a product, and disposes of it in landfill at the end of use. A circular economy returns materials to use, repair extends use, and life-cycle assessment evaluates impacts rather than describing this take-make-dispose model.

Study with flashcards

Lock in the answers with 70 flashcards on Emerging Technologies and Sustainable Design.

What path does rotary motion follow?

A circular path.

How is rotary motion measured?

In revolutions per minute (rpm).

In what direction and path does linear motion travel?

In one direction along a straight line.

See the flashcards →

Read the study guide

Go over the full study guide for Emerging Technologies and Sustainable Design.

Read the study guide →

Related classes

Make your own practice quizzes

Upload your class notes and Revizly writes a practice quiz with explained answers in about a minute.

Quiz maker