Emerging Technologies and Sustainable Design Flashcards (70 cards)

All cards

1Question

What path does rotary motion follow?

Answer

A circular path.

2Question

How is rotary motion measured?

Answer

In revolutions per minute (rpm).

3Question

In what direction and path does linear motion travel?

Answer

In one direction along a straight line.

4Question

How is linear speed calculated?

Answer

Distance travelled divided by time taken.

5Question

What motion does a cam convert rotary motion into?

Answer

Reciprocating motion.

6Question

How does a smaller gear rotate compared with a larger gear in a simple gear train?

Answer

It rotates faster and in the opposite direction.

7Question

What is a linkage used to direct?

Answer

Forces and movement to where they are needed.

8Question

How can a lever trade distance moved for force exerted?

Answer

It can reduce distance moved while increasing force, or the reverse.

9Question

Which three subsystems make up an electronic system?

Answer

Input, process, and output.

10Question

What does an electrical circuit need to start its chain of events?

Answer

An input.

11Question

Which input device detects changes in light?

Answer

A light-dependent resistor (LDR).

12Question

What is a microcontroller?

Answer

A chip that reads inputs and controls outputs, programmed for a specific use.

13Question

What three forms can circuit outputs produce?

Answer

Sound, light, or movement.

14Question

Which circuit output devices produce movement?

Answer

Motors and servos.

15Question

Which woods are classified as hardwoods?

Answer

Oak, birch, and beech.

16Question

Which materials are examples of manufactured boards?

Answer

MDF, chipboard, and plywood.

17Question

What happens to thermosetting polymers when heated?

Answer

They do not reshape.

18Question

What distinguishes ferrous metals by their iron content?

Answer

They contain iron.

19Question

Which six actions make up the sustainability Rs?

Answer

Rethink, Refuse, Reduce, Reuse, Repair, and Recycle.

20Question

What is planned obsolescence?

Answer

Designing a product with a limited expected lifespan before it is discarded or replaced.

21Question

Which five stages are assessed across a product life cycle?

Answer

Raw material extraction, manufacturing, distribution, use, and disposal or recycling.

22Question

What happens to materials or products at the end of use in a circular economy?

Answer

They are recycled or replaced with recycled sources instead of being sent to landfill.

23Question

Where does a linear economy dispose of products at the end of use?

Answer

In landfill.

24Question

What do disruptive technologies unexpectedly displace?

Answer

Established technologies.

25Question

What do economies of scale reduce per product as output increases?

Answer

Manufacturers’ costs.

26Question

What can AI predict using machine-sensor data?

Answer

Maintenance needs before parts break.

27Question

What advantage do industrial robots have over humans when performing tasks?

Answer

They can work without breaks.

28Question

What percentage of Buxton natural mineral water bottles is made from recycled plastic, excluding caps and labels?

Answer

100%.

29Question

Why is conventional crude-oil-derived polymer considered unsustainable?

Answer

Crude oil is a finite resource.

30Question

How long does bamboo take to reach maturity?

Answer

Three to five years.

31Question

What must be aligned in third-angle projection?

Answer

The plan, front, and side elevations.

32Question

At what angles are the axes shown in isometric projection?

Answer

At 30° on either side.

33Question

What should be checked before producing a technical drawing?

Answer

The scale and dot spacing.

34Question

What path does oscillating motion follow?

Answer

Back and forth along a circular path.

35Question

How is oscillating motion measured?

Answer

In oscillations per minute (opm).

36Question

What path does reciprocating motion follow?

Answer

Back and forth in a straight line.

37Question

How is reciprocating motion measured?

Answer

In oscillations per minute (opm).

38Question

What role does the driver gear have in a gear train?

Answer

It is the input gear.

39Question

What role does the driven gear have in a gear train?

Answer

It is the output gear.

40Question

What does a belt transmit between pulleys?

Answer

Power.

41Question

How does a car jack’s lever trade movement distance for lifting a heavy object?

Answer

The person moves the lever much farther than the car rises.

42Question

What does a flowchart help visualise about a microcontroller?

Answer

Its input-based decisions and required outputs.

43Question

Which woods are classified as softwoods?

Answer

Pine, spruce, and cedar.

44Question

Which qualities do thermoplastics have when moulded and in use?

Answer

They mould easily, come in various colours, and withstand wear and tear.

45Question

What kind of polymer is PLA?

Answer

A biopolymer.

46Question

What is an alloy?

Answer

A mixture of two or more metals combined to improve properties.

47Question

What can rethinking materials and processes support in design?

Answer

More sustainable and ethical design decisions.

48Question

What alternative to plastic straws can help avoid microplastic pollution?

Answer

Paper or card straws.

49Question

How does reusing materials already in circulation benefit sustainability?

Answer

It avoids extracting new raw materials.

50Question

What can happen when products are difficult to separate for recycling?

Answer

Their materials can end up in landfill.

51Question

How can reducing product size or product miles affect CO₂ emissions?

Answer

It can reduce CO₂ emissions.

52Question

How does making a product repairable reduce material use?

Answer

It lets users fix it instead of buying a replacement.

53Question

What does life-cycle assessment examine about raw materials?

Answer

Where and how they are extracted.

54Question

What does life-cycle assessment examine about production?

Answer

How the product is manufactured and how much energy production uses.

55Question

What does life-cycle assessment examine about a product’s use and end of life?

Answer

Its distribution, duration of use, repairability, and what happens after use.

56Question

How can manufacturers reduce costs by sourcing components?

Answer

They can buy standard components in bulk.

57Question

What resources do AI servers require continuously to run and cool?

Answer

Large amounts of electricity and water.

58Question

How can continuous robot operation affect costs over time?

Answer

It can lower costs.

59Question

Where are biometric scanners used for authentication?

Answer

Airport check-ins and immigration border control.

60Question

What material did McDonald’s switch to for its straws instead of plastic?

Answer

A more sustainable card material.

61Question

How does Buxton make its bottle caps and labels less wasteful after use?

Answer

It makes them recyclable.

62Question

Why is plant-starch PLA presented as more sustainable than oil-derived polymer?

Answer

It uses plant starch instead of finite oil.

63Question

What distance do product miles measure for materials and products?

Answer

The distance from material source to factory and from factory to consumer.

64Question

What paper is commonly used for third-angle projection?

Answer

Square grid paper marked with dots or lines.

65Question

What does a plan or top view show?

Answer

What is visible when looking down at an object from above.

66Question

How is a side view obtained from the front view?

Answer

By turning 90 degrees from the front view.

67Question

Which view is closest to the viewer?

Answer

The front view.

68Question

What markings can isometric paper have?

Answer

Lines or dots.

69Question

What key limitation applies to synthetic textiles such as polyester, nylon, and Lycra?

Answer

They are not inherently waterproof.

70Question

What distinguishes PlantBottle from PLA biopolymers?

Answer

PlantBottle is made from plant-based PET, not PLA, and is not biodegradable.

Test yourself with the quiz

Answer 32 questions on Emerging Technologies and Sustainable Design.

1. A small robot travels 18 metres along a straight corridor in 6 seconds. How should its motion and speed be described?

2. A component must be made from a polymer that can be moulded into shape but will not reshape if heated later. Which category should the designer choose?

Take the quiz →

Read the study guide

Go over the full study guide for Emerging Technologies and Sustainable Design.

Read the study guide →

Related classes

Make your own flashcards

Upload your class notes and Revizly writes your flashcards in about a minute.

Flashcard maker