Measurement and Geometric Quantities Practice Quiz (107 questions)

All questions and answers

1. In the number 58,307, which feature explains why the digit 8 has a value of 8,000?

Its position in the tens place
Its position in the thousands place
Its identity as the digit eight
Its position in the hundreds place

Its position in the thousands place

Explanation

In decimal positional notation, a digit’s value depends on its position, so 8 in the thousands place represents 8,000. The digit’s identity alone does not give its place value; the hundreds and tens places represent different values.

2. For the number 125,436, what is the number of complete hundreds it contains?

1,254 hundreds
12,543 hundreds
125 hundreds
4 hundreds

1,254 hundreds

Explanation

The number of complete hundreds is found by dividing 125,436 by 100 and counting the whole groups: 1,254. The hundreds digit is 4, while 125 counts thousands groups and 12,543 counts complete tens.

3. A student compares 7.406 and 7.45. Which number is greater?

7.45
7.406
They are equal
The comparison cannot be determined

7.45

Explanation

The integer parts and tenths digits match, so compare hundredths: 7.45 has 5 hundredths, while 7.406 has 0 hundredths. The digits farther right do not reverse that difference; writing a trailing zero makes the comparison clear: 7.450 > 7.406.

4. Using the decimal multiplication rule, what is 1.2×0.351.2 \times 0.35?

4.2
0.042
0.42
1.55

0.42

Explanation

Multiply as whole numbers: 12 × 35 = 420. The factors have three decimal places altogether, so the product is 0.420, or 0.42; 0.042 misplaces the decimal, 4.2 uses too few places, and 1.55 comes from addition.

5. A school has 84 tickets to divide equally among 7 classes. Which plan follows the recommended problem-solving process?

Calculate 84 + 7, then state the tickets per class
Understand the sharing situation, calculate 84 ÷ 7, then state the tickets per class
Calculate 84 ÷ 7 without interpreting or stating the result
State the tickets per class, then calculate 84 ÷ 7

Understand the sharing situation, calculate 84 ÷ 7, then state the tickets per class

Explanation

A word problem is solved by understanding the situation, identifying the required calculation, and then showing the calculation with a sentence explaining the result. Adding the class count confuses the operation, while stating a result before calculating or omitting its interpretation skips a required step.

6. What is the value of 30−8+530 - 8 + 5?

13
17
33
27

27

Explanation

With only addition and subtraction, calculate from left to right: 30 − 8 = 22, then 22 + 5 = 27. The other results come from changing the prescribed order or regrouping the terms.

7. What is the value of 18−2×518 - 2 \times 5 when there are no parentheses?

80
100
28
8

8

Explanation

Multiplication takes priority over subtraction: 2 × 5 = 10, and 18 − 10 = 8. Calculating left to right gives 80, while multiplying a sum or subtracting from the wrong value applies a different operation order.

8. What is the value of 3+22×43 + 2^2 \times 4?

19
100
40
28

19

Explanation

Evaluate the power first: 2² = 4; then multiply 4 × 4 = 16; finally add 3 to get 19. Multiplying before the power or adding first changes the required priority, and treating 2² as 2 × 2 is not the error here—the power equals 4.

9. Which of the following is a relative number?

4.6 units from zero
a variable with no assigned value
−4.6
the symbol −

−4.6

Explanation

A relative number can be positive, negative, or zero, so −4.6 qualifies. “4.6 units from zero” describes a distance, not a signed number; the symbol − alone is not a number; an unassigned variable is not one of the stated examples.

10. A hiker records temperatures of −8°C, −2°C, +1°C, and +6°C. Which list orders them from least to greatest?

−8°C, −2°C, +1°C, +6°C
+1°C, +6°C, −2°C, −8°C
−8°C, −2°C, +6°C, +1°C
−2°C, −8°C, +1°C, +6°C

−8°C, −2°C, +1°C, +6°C

Explanation

Every negative number is less than every positive number; among negatives, the one farther from zero is smaller, while positives increase with their distance from zero. Reversing the negative order confuses distance ordering, placing positives first ignores their signs, and reversing the positive order uses the wrong direction.

11. A diver is at −9 meters and then changes position by +4 meters. What is the diver’s new position?

−5 meters
+13 meters
−13 meters
+5 meters

−5 meters

Explanation

The signs differ, so subtract the smaller distance from the larger and keep the sign of the number with the greater distance: 9−4=59-4=5, with a negative sign. Adding the distances gives −13, reversing the sign gives +5, and combining the smaller distance’s sign with the result gives +13.

12. A machine multiplies a reading of −3 by a reading of +5. What is the product?

−15
+15
+8
−8

−15

Explanation

Opposite-sign factors produce a negative product, and their distances from zero are multiplied: 3×5=153\times5=15, so the result is −15. A positive sign confuses opposite signs with matching signs; −8 and +8 arise from adding the distances rather than multiplying them.

13. In the fraction 79\frac{7}{9}, which number is the denominator?

7
1
9
2

9

Explanation

In a fraction ab\frac{a}{b}, the denominator is the lower number, so the denominator of 79\frac{7}{9} is 9. The 7 is the numerator; 1 treats the bar as a value; 2 is the difference between the terms, not the denominator.

14. A recipe uses two thirds of 18 cups of flour. How many cups does it use?

27 cups
6 cups
16 cups
12 cups

12 cups

Explanation

“Two thirds of 18” means multiply: 23×18=12\frac{2}{3}\times18=12 cups. Dividing 18 by 23\frac{2}{3} gives 27, subtracting 2 gives 16, and taking one third rather than two thirds gives 6.

15. A student multiplies both the numerator and denominator of 58\frac{5}{8} by 3. What is the resulting quotient’s value compared with the original?

It becomes one third of 58\frac{5}{8}
It becomes three times 58\frac{5}{8}
It remains equal to 58\frac{5}{8}
It becomes 524\frac{5}{24}

It remains equal to $$\frac{5}{8}$$

Explanation

Multiplying the numerator and denominator by the same nonzero number preserves a quotient’s value: 5×38×3=1524=58\frac{5\times3}{8\times3}=\frac{15}{24}=\frac{5}{8}. Tripling the value mistakes scaling both terms for scaling only the numerator; one third and 524\frac{5}{24} reflect an incorrect change to the quotient.

16. A student is asked for the multiplicative inverse of −6. Which answer gives the inverse rather than the opposite?

−16-\frac{1}{6}
16\frac{1}{6}
−6
6

$$-\frac{1}{6}$$

Explanation

The inverse of a nonzero number is the number that gives a product of 1 with it, so the inverse of −6 is −16-\frac{1}{6}. The opposite is 6, the original number is −6, and 16\frac{1}{6} has the wrong sign and does not yield a product of 1 with −6.

17. Which expression gives the square of −6-6 according to the definition of squaring a number?

−(−6)-(-6)
(−6)×(−6)(-6)\times(-6)
2×(−6)2\times(-6)
(−6)−(−6)(-6)-(-6)

$$(-6)\times(-6)$$

Explanation

Squaring a number means multiplying it by itself. Doubling, taking its opposite, and subtracting it from itself are different operations.

18. A student compares the squares of −8-8 and 88. What should the student conclude?

The square of −8-8 is −64-64, while the square of 88 is 6464.
Both squares equal 6464.
The square of −8-8 is 6464, while the square of 88 is −64-64.
Both squares equal 88.

Both squares equal $$64$$.

Explanation

A number and its opposite have the same square, and every square is nonnegative. A negative square confuses the sign of the input with the sign of its square; 88 confuses squaring with taking an absolute value; reversing which square is negative also contradicts nonnegativity.

19. A student is asked for the square root of 4949 and also to solve x2=49x^2=49. Which pair of answers is correct?

The square root is 4949; the equation solutions are 77 and −7-7.
The square root is −7-7; the equation solutions are 77 and −7-7.
The square root is 77; the equation solutions are 77 and −7-7.
The square root is 77; the equation solution is 77.

The square root is $$7$$; the equation solutions are $$7$$ and $$-7$$.

Explanation

The square root symbol names the unique nonnegative number whose square is the given value, while x2=49x^2=49 has two solutions, 77 and −7-7. Giving both as the square root confuses the definition with the equation; giving one equation solution omits the other; a negative square root violates the nonnegative definition.

20. A student expands 10410^4 as a product. Which expression is correct?

10×10×10×1010\times10\times10\times10
4×104\times10
10×10×10×10×1010\times10\times10\times10\times10
4×4×4×44\times4\times4\times4

$$10\times10\times10\times10$$

Explanation

For a positive integer exponent, 10410^4 is the product of four factors equal to 10. Replacing the base with 4 changes the power, adding a fifth factor miscounts the exponent, and multiplying 4 by 10 treats the exponent as a coefficient.

21. A calculator display shows 10−310^{-3}. Which value does this represent?

13\frac{1}{3}
11000\frac{1}{1000}
−1000-1000
10001000

$$\frac{1}{1000}$$

Explanation

A negative power is the reciprocal of the corresponding positive power, so 10−3=1103=1100010^{-3}=\frac{1}{10^3}=\frac{1}{1000}. Dropping the minus sign gives 1000, treating it as an additive negative gives −1000, and taking the reciprocal of the exponent gives the unrelated value 13\frac{1}{3}.

22. A student simplifies 107103\frac{10^7}{10^3}. Which result follows from the quotient rule for powers with the same base?

102110^{21}
101010^{10}
10410^4
10−410^{-4}

$$10^4$$

Explanation

For division of powers with the same base, subtract the denominator exponent from the numerator exponent: 107−3=10410^{7-3}=10^4. Adding is the multiplication rule, multiplying is the power-of-a-power rule, and reversing the subtraction gives the wrong sign.

23. Which expression is in scientific notation for 0.000720.00072?

72×10−572\times10^{-5}
7.2×1047.2\times10^4
7.2×10−47.2\times10^{-4}
0.72×10−30.72\times10^{-3}

$$7.2\times10^{-4}$$

Explanation

Scientific notation requires a coefficient with magnitude at least 1 and less than 10; moving the decimal in 0.000720.00072 gives 7.2×10−47.2\times10^{-4}. The coefficient 72 and 0.72 fall outside the required range, while the positive exponent gives a number much larger than the original.

24. When dividing 84 by 7, the remainder is zero. What follows about 84 and 7?

84 is not divisible by 7 because no remainder remains
7 is a multiple of 84, and 84 is a divisor of 7
84 is a multiple of 7, and 7 is a divisor of 84
84 is prime because its quotient is 12

84 is a multiple of 7, and 7 is a divisor of 84

Explanation

A zero remainder means the dividend is a multiple of the divisor, so 84 is a multiple of 7 and 7 divides 84. The reversed relationship swaps divisor and dividend, a quotient does not make 84 prime, and zero is precisely the remainder that establishes divisibility.

25. Which divisibility claim is true for the integer 4,572?

It is divisible by 3 because its units digit is 2
It is divisible by 10 because its units digit is 2
It is divisible by 3 because its digit sum is 18
It is not divisible by 3 because its digit sum is not 9

It is divisible by 3 because its digit sum is 18

Explanation

The digit sum is 4+5+7+2=184+5+7+2=18, a multiple of 3, so 4,572 is divisible by 3. Using the units digit for divisibility by 3 confuses that test with tests for 2 or 5; divisibility by 10 requires a units digit of 0, while divisibility by 3 does not require the digit sum to equal 9.

26. Which sequence gives the prime factorization of 90 when repeatedly dividing by the smallest prime divisor?

3×3×103\times3\times10
2×3×3×52\times3\times3\times5
2×3×152\times3\times15
2×3×52\times3\times5

$$2\times3\times3\times5$$

Explanation

Repeated division gives 90÷2=4590\div2=45, 45÷3=1545\div3=15, 15÷3=515\div3=5, and 5 is prime, so the factorization is 2×3×3×52\times3\times3\times5. The alternatives either leave a composite factor or omit a repeated factor.

27. Which expression is a literal expression?

4x+7=154x+7=15
4+74+7
4x+74x+7
4+7=114+7=11

$$4x+7$$

Explanation

A literal expression contains a letter, as 4x+74x+7 does. 4+74+7 has no letter, and the other choices are equations rather than expressions; a letter need not be assigned a value for an expression to be literal.

28. Which notation correctly writes m×nm\times n with the multiplication sign omitted?

m+nm+n
mnmn
mm
n−mn-m

$$mn$$

Explanation

In a literal expression, multiplication between letters may be written by placing them together, so m×n=mnm\times n=mn. The plus sign changes the operation, while the other choices do not represent the product of both factors.

29. After removing the parentheses in −(3x−5+2y)-(3x-5+2y), which expression results?

3x+5−2y3x+5-2y
−3x−5+2y-3x-5+2y
−3x+5−2y-3x+5-2y
3x−5+2y3x-5+2y

$$-3x+5-2y$$

Explanation

A minus sign before parentheses reverses the sign of every term: −(3x−5+2y)=−3x+5−2y-(3x-5+2y)=-3x+5-2y. Keeping the internal signs corresponds to a preceding plus, and changing only some signs fails to distribute the minus to every term.

30. What value does 3x−43x-4 have when x=5x=5?

11
5
19
7

11

Explanation

Substitute 5 for xx and calculate: 3×5−4=15−4=113\times5-4=15-4=11. Calculating subtraction before multiplication gives 7; changing subtraction to addition gives 19, and multiplying the constant by 5 misapplies the expression.

31. Which statement defines an equation?

An expression containing an unknown but no equality sign
An equality in which the unknown appears on both sides
An equality between numerical quantities with no unknown
An equality between two quantities that contains one or more unknowns

An equality between two quantities that contains one or more unknowns

Explanation

An equation is an equality between two quantities that contains at least one unknown. An expression need not contain an equality, and a numerical equality has no unknown.

32. A student transforms 3x+8=203x+8=20 by subtracting 8 from both sides. Which equation results while preserving the equality?

3x+8=03x+8=0
3x=283x=28
3x=123x=12
3x+16=203x+16=20

$$3x=12$$

Explanation

Subtracting the same number from each side preserves equality, so subtracting 8 gives 3x=123x=12. The other results come from changing only one side, adding 8, or subtracting the wrong number.

33. A product equation is written as (x−4)(2x+6)=0(x-4)(2x+6)=0. Which condition describes how its solutions can be found?

Set at least one factor equal to zero
Set the sum of the factors equal to zero
Require both factors to equal zero simultaneously
Set both factors equal to one

Set at least one factor equal to zero

Explanation

A product is zero if and only if at least one factor is zero, so the factor equations are x−4=0x-4=0 or 2x+6=02x+6=0. Setting the sum to zero or requiring both factors to vanish does not apply the zero-product rule.

34. A real number xx is required to satisfy x2=−9x^2=-9. How many real solutions does this equation have?

Two real solutions
No real solutions
One real solution, namely three
One real solution, namely zero

No real solutions

Explanation

For x2=ax^2=a with a<0a<0, there is no real solution because a real square cannot be negative. Two real roots apply when the right-hand side is positive, while zero is the solution when it equals zero.

35. In a survey of 25 people, the response “yes” appears 9 times. What is the effectif of “yes”?

16
25
9
925\frac{9}{25}

9

Explanation

The effectif of a value is the number of times it appears, so “yes” has effectif 9. The total sample size is 25, 16 counts the other responses, and 925\frac{9}{25} is a proportion rather than a count.

36. A pie chart represents 20 observations, and one category occurs 5 times. What angle should that category occupy?

270°
5°
45°
90°

90°

Explanation

The category is 520\frac{5}{20} of the total, so its angle is 520×360°=90°\frac{5}{20}\times360°=90°. Using the count as degrees or using 180° as the full-circle total gives the wrong scale.

37. A report must make it easy to see that one category accounts for exactly one-quarter of all observations. Which diagram is better suited to this purpose?

A pie chart
A list of category counts
A bar chart
A semicircular chart interpreted with a 360° total

A pie chart

Explanation

A pie chart makes a category's share of the whole easy to see through its sector, so one-quarter corresponds to one-quarter of the disk. Bar charts are useful for comparing effectifs, while a semicircular chart uses 180° for the total.

38. A time interval is written as [6h45;7h[[6\text{h}45;7\text{h}[. Which statement correctly identifies whether the boundary times belong to the interval?

Both 6h45 and 7h are excluded
6h45 is included, and 7h is excluded
Both 6h45 and 7h are included
6h45 is excluded, and 7h is included

6h45 is included, and 7h is excluded

Explanation

In an interval written with a closed left bracket and an open right bracket, the left endpoint is included and the right endpoint is excluded. Treating the right endpoint as included reverses the meaning of the open bracket.

39. A student spins a covered spinner and cannot know which sector it will land on before the spin. What kind of experiment is this?

A random experiment
An impossible experiment
A certain experiment
A repeated experiment

A random experiment

Explanation

A random experiment has a result that cannot be predicted before it takes place. A certain experiment has a guaranteed result, an impossible experiment cannot occur, and repetition does not define unpredictability.

40. For a standard six-sided die, which classification applies to rolling a number less than 7?

A random experiment
An impossible event
An event with probability one-half
A certain event

A certain event

Explanation

Every result on a six-sided die is less than 7, so the event must occur and is certain. An impossible event cannot occur; having multiple favorable outcomes does not make this event uncertain, and the event is not a half-chance.

41. Which statement correctly describes the possible forms and range of a probability?

It lies from 0 to 100 and can be written as a decimal, fraction, or percentage.
It lies from 0 to 1 and can be written as a fraction or percentage, but not a decimal.
It lies from 0 to 1 and can be written only as a decimal.
It lies from 0 to 1 and can be written as a decimal, fraction, or percentage.

It lies from 0 to 1 and can be written as a decimal, fraction, or percentage.

Explanation

A probability is between 0 and 1, inclusive, and may be expressed as a decimal, fraction, or percentage. The range 0 to 100 confuses probability values with percentage notation, while the other statements incorrectly exclude valid forms.

42. A fair six-sided die is rolled once. Using equally likely outcomes, what is the probability of rolling an even number?

12\frac{1}{2}
11
16\frac{1}{6}
33

$$\frac{1}{2}$$

Explanation

There are three even outcomes, 2, 4, and 6, out of six equally likely outcomes, so P(E)=36=12P(E)=\frac{3}{6}=\frac{1}{2}. The value 16\frac{1}{6} counts a single outcome, 1 treats every outcome as favorable, and 3 omits the total-outcomes denominator.

43. A workshop makes 12 candles using 3 kilograms of wax. If wax use is proportional to the number of candles, how much wax is needed for 20 candles?

3 kilograms
7 kilograms
5 kilograms
8 kilograms

5 kilograms

Explanation

Proportional quantities share a constant multiplier: the rate is 3÷12=0.253\div12=0.25 kilogram per candle, so 20 candles need 20×0.25=520\times0.25=5 kilograms. The value 7 adds eight candles to the wax amount, 3 keeps the original quantity, and 8 reverses the rate.

44. Which fraction expresses a percentage by definition?

A proportion written as a quotient with denominator 100
A proportion written as a quotient with denominator 1,000
A proportion written as a quotient with denominator 10
A proportion written as a quotient with numerator 100

A proportion written as a quotient with denominator 100

Explanation

A percentage is a proportion expressed as a quotient with denominator 100. Denominators 10 and 1,000 use different scales, while a numerator of 100 does not match the definition.

45. A jacket costs $80, and a discount is 15% of its price. What is the discount amount?

$65
$68
$1,200
$12

$12

Explanation

To find 15% of $80, multiply by 15100\frac{15}{100}: 80×15100=1280\times\frac{15}{100}=12, so the discount is $12. The values $65 and $68 result from subtracting the percentage number or subtracting the discount from the price; $1,200 uses 15 without dividing by 100.

46. A bakery divides 40 rolls between two teams in the ratio 3:5. How many rolls does the team represented by 3 parts receive?

25 rolls
3 rolls
15 rolls
8 rolls

15 rolls

Explanation

The ratio has 3+5=83+5=8 total parts, so each part is 40÷8=540\div8=5 rolls and the 3-part team receives 3×5=153\times5=15 rolls. The 25-roll answer gives the larger share to that team, 3 confuses parts with rolls, and 8 is the total number of parts.

47. A rule assigns each input number exactly one output number. What is this kind of rule called?

A table of values
A correspondence with multiple outputs
A constant value
A function

A function

Explanation

A function assigns one unique image to each input, or antecedent. A correspondence with multiple outputs violates uniqueness, a constant value is an output rather than the rule, and a table is one way to represent a function.

48. Which set consists entirely of ways to represent a function?

A graph, a calculation program, an equation solver, or a calculator
A value table, input-output pairs, a graph, or an equation solution
An expression, a calculator, a graph, or a list of inputs
An expression, a value table, a graph, or a calculation program

An expression, a value table, a graph, or a calculation program

Explanation

A function can be represented by a literal expression, a table of values, a graph, or a calculation program. A calculator and an equation solver may help work with a function but are not among these four representation forms.

49. For f(x)=3x−4f(x)=3x-4, which method finds the input whose image is 11?

Solve 3x+4=113x+4=11 for xx
Solve 3x−4=113x-4=11 for xx
Substitute 1111 for xx and evaluate
Set x=11x=11 and calculate f(x)f(x)

Solve $$3x-4=11$$ for $$x$$

Explanation

To find an antecedent of 11, solve the equation f(x)=11f(x)=11, giving 3x−4=113x-4=11. Substituting 11 finds its image, setting x=11x=11 treats the target as an input, and changing subtraction to addition changes the function.

50. A function's graph intersects the horizontal line y=6y=6 at three points. What does this imply about the number 6?

It has exactly one antecedent under the function
It has three images under the function
It has three antecedents under the function
It has two antecedents under the function

It has three antecedents under the function

Explanation

Each intersection at y=6y=6 represents an input whose image is 6, so 6 has three antecedents. The unique-image property applies to each input, not to the number of inputs that can share an image.

51. How many seconds are in one hour?

1,800 seconds
60 seconds
1,440 seconds
3,600 seconds

3,600 seconds

Explanation

One hour is 60 minutes, and each minute is 60 seconds, so an hour contains 60×60=3,60060\times60=3{,}600 seconds. Sixty is the seconds-per-minute conversion, while 1,800 and 1,440 result from using inappropriate conversion factors.

52. A timer records 7 hours. What is this duration in seconds?

420 seconds
168 seconds
7,000 seconds
25,200 seconds

25,200 seconds

Explanation

Convert hours to minutes and then minutes to seconds: 7×60×60=25,2007\times60\times60=25{,}200 seconds. The value 420 is the number of minutes, while the other choices use an unrelated or incomplete conversion.

53. A duration of 725 seconds is expressed in complete minutes and remaining seconds. What is the result?

12 minutes 5 seconds
12 minutes 0 seconds
13 minutes 0 seconds
5 minutes 12 seconds

12 minutes 5 seconds

Explanation

Euclidean division gives 725=12×60+5725=12\times60+5, so the duration is 12 complete minutes and 5 seconds remaining. Omitting the remainder loses 5 seconds, reversing the quotient and remainder misreads their units, and rounding changes the duration.

54. A recording lasts 3.4 hours. What is its duration in hours, minutes, and seconds?

3 hours 24 minutes 0 seconds
3 hours 40 minutes 0 seconds
3 hours 24 minutes 24 seconds
3 hours 4 minutes 0 seconds

3 hours 24 minutes 0 seconds

Explanation

Keep the 3 whole hours and convert the decimal part: 0.4×60=240.4\times60=24 minutes, with no fractional minute left to convert to seconds. Treating 0.4 as four minutes, multiplying by 100, or converting the already-whole 24 minutes again gives an incorrect duration.

55. Which unit is the base unit of mass in the metric units listed?

The milligram, written mg
The gram, written g
The kilogram, written kg
The litre, written l

The gram, written g

Explanation

The gram is the unit of mass, and kilogram and milligram are respectively a multiple and a submultiple of it. The litre measures capacity, not mass.

56. Which unit is the base unit of capacity in the metric units listed?

The millilitre, written ml
The litre, written l
The kilolitre, written kl
The gram, written g

The litre, written l

Explanation

The litre is the unit of capacity, with kilolitre and millilitre as a multiple and a submultiple. The gram is a unit of mass.

57. A designer needs to describe the surface area of a square whose sides are each 1 m; what does 1 m² represent?

The length of one side of a square
The perimeter of a square with 1 m sides
The volume of a cube with 1 m edges
The area of a square with 1 m sides

The area of a square with 1 m sides

Explanation

A square metre measures area, and 1 m² is the surface area of a square with 1 m sides. Perimeter and side length are lengths, while cubic metres measure volume.

58. A land surveyor converts an area of 3 dam² into square metres; what value should be recorded?

30 m²
300 m²
0.03 m²
30,000 m²

300 m²

Explanation

Square units scale by the square of the length conversion, so 1 dam² = 100 m² and 3 dam² = 300 m². Using a factor of 10 mistakes a length conversion for an area conversion.

59. A rectangular sign is 8 cm long and 5 cm wide; what is its area?

64 cm²
20 cm²
13 cm²
40 cm²

40 cm²

Explanation

A rectangle’s area is length times width, so 8×5=408\times5=40 cm². Adding gives a sum of lengths, while halving the product applies the triangle formula.

60. What does 1 m³ represent?

The area of a cube’s face with 1 m edges
The perimeter of a square with 1 m sides
The volume of a cube with 1 m edges
The area of a square with 1 m sides

The volume of a cube with 1 m edges

Explanation

Volume measures the space occupied by a solid, and 1 m³ is the volume of a cube with 1 m edges. A square metre measures a surface, not the space inside a solid.

61. A cyclist travels at a constant speed of 12 km/h for 2.5 hours. What distance does the cyclist travel?

4.8 km
14.5 km
24 km
30 km

30 km

Explanation

For uniform motion, distance is speed multiplied by time: d=v×t=12×2.5=30d=v\times t=12\times2.5=30 km. Dividing speed by time gives 4.8, while adding the values gives 14.5.

62. A device uses 75 watts of power for 4 hours. How much energy does it consume?

300 Wh
79 Wh
18.75 Wh
300 W

300 Wh

Explanation

Energy consumed is power multiplied by time, so E=P×t=75×4=300E=P\times t=75\times4=300 Wh. Dividing gives 18.75, and watts are the power unit rather than the resulting energy unit.

63. A train travels 180 km in 3 hours. What is its average speed?

177 km/h
1/60 km/h
540 km/h
60 km/h

60 km/h

Explanation

Average speed is distance divided by travel time: v=dt=1803=60v=\frac{d}{t}=\frac{180}{3}=60 km/h. Multiplying gives 540, while inverting the quotient gives 1/60 rather than the speed.

64. A material has a mass of 12 kg and a volume of 0.004 m³. What is its mass density?

0.004 kg/m³
3,000 kg/m³
0.00033 kg/m³
0.048 kg/m³

3,000 kg/m³

Explanation

Mass density is mass divided by volume: ρ=mV=120.004=3,000\rho=\frac{m}{V}=\frac{12}{0.004}=3{,}000 kg/m³. Multiplication gives 0.048, and inverting the ratio gives approximately 0.00033.

65. A triangle is transformed by a rotation, and its image is compared with the original. Which set of properties is preserved by the rotation?

Lengths, angles, and areas, but not alignment or perimeters
Alignment, lengths, angle measures, perimeters, and areas
Alignment and angles, but not lengths, perimeters, or areas
Lengths and perimeters, but not alignment, angles, or areas

Alignment, lengths, angle measures, perimeters, and areas

Explanation

A rotation is an isometry and preserves alignment, lengths, angle measures, perimeters, and areas. A non-unit homothety does not preserve lengths, while the other choices incorrectly omit properties preserved by rotations.

66. A positive-factor homothety uses the ratio k=0.6k=0.6. What kind of transformation does it produce?

An enlargement
A reflection
An isometry
A reduction

A reduction

Explanation

A positive homothety factor less than one produces a reduction; here, 0<0.6<10<0.6<1. An enlargement requires a factor greater than one, and an isometry preserves lengths rather than scaling them.

67. A rectangular box is enlarged by a homothety with ratio k=2k=2. If its original volume is 5 cm³, what is the image volume?

20 cm³
10 cm³
0.625 cm³
40 cm³

40 cm³

Explanation

A homothety multiplies volume by k3k^3, so the image volume is 23×5=402^3\times5=40 cm³. The values 10 and 20 come from applying the length or area factor instead of the volume factor.

68. A plan shows a wall as 4 cm long, while the corresponding real wall is 8 m long. What is the scale, expressed as plan length divided by real length in the same unit?

196
200
1/2
1/200

1/200

Explanation

The scale is plan length divided by corresponding real length, with both lengths in the same unit. Since 8 m is 800 cm, the scale is 4800=1200\frac{4}{800}=\frac{1}{200}; using 8 without conversion gives 1/2.

69. A globe is marked with two kinds of imaginary lines: one set consists of circles parallel to the equator, and the other set consists of semicircles joining the poles. What are these sets called, respectively?

Parallels and hemispheres
Meridians and parallels
Parallels and meridians
Full circles and meridians

Parallels and meridians

Explanation

Parallels are circles parallel to the equator, while meridians are semicircles connecting the North and South Poles. Reversing the terms confuses their shapes; hemispheres are regions rather than lines, and meridians are semicircles rather than full circles.

70. A map labels a location with the coordinates 35° north and 140° east. Which coordinate identifies its parallel, and which identifies its meridian?

Latitude is 35° north; longitude is 140° east
Latitude is 140° east; latitude also identifies the meridian
Latitude is 140° east; longitude is 35° north
Latitude is 35° north; longitude also identifies the parallel

Latitude is 35° north; longitude is 140° east

Explanation

Latitude identifies the parallel and is stated first; longitude identifies the meridian. Reversing them assigns each coordinate to the wrong line, while the other errors confuse which line latitude or longitude identifies.

71. Which description correctly identifies the Earth's polar axis and the model's mean radius?

The axis passes through the North and South Poles; the mean radius is 6,371 km
The axis passes through the poles; the mean radius is 6,371 km along the axis
The axis passes through the North and South Poles; the mean radius is 6,371 m
The axis follows the equator; the mean radius is 6,371 km

The axis passes through the North and South Poles; the mean radius is 6,371 km

Explanation

The Earth is modeled as a sphere with a mean radius of 6,371 km and rotates about the polar axis through the North and South Poles. The equator is a circle, the radius is not the axis itself, and 6,371 meters has the wrong unit.

72. A solid has faces that are all polygons. How is it classified?

A rectangular prism
A polygon
A curved solid
A polyhedron

A polyhedron

Explanation

A polyhedron is a solid whose faces are all polygons. A curved solid does not meet that face condition, a rectangular prism is a particular kind of polyhedron, and a polygon is a flat figure.

73. An artist draws a rectangular prism in cavalier perspective. Which treatment follows the drawing rules?

Draw the front face at true size and reduce the rear face, keep parallel equal-length edges equal, and dash hidden edges
Draw the front and rear faces at true size, keep parallel equal-length edges equal, use solid lines for hidden edges, and dash visible edges
Draw the front and rear faces at true size, keep parallel equal-length edges equal, dash hidden edges, and use solid lines for visible edges
Draw the front and rear faces at true size, shorten some parallel equal-length edges, dash hidden edges, and use solid lines for visible edges

Draw the front and rear faces at true size, keep parallel equal-length edges equal, dash hidden edges, and use solid lines for visible edges

Explanation

Cavalier perspective keeps the front and rear faces at true size and preserves parallelism and equal lengths; hidden edges are dashed and visible edges are solid. Solid hidden edges reverse the line convention, a reduced rear face violates the face-size rule, and shortened parallel edges violate length preservation.

74. A student cuts out connected polygons and folds them to assemble a solid. What is this flat arrangement called?

A polyhedron
A unique face pattern
A net
A cavalier perspective

A net

Explanation

A net lays a solid's faces flat, joined along shared edges, so folding them recreates the solid. A polyhedron is the solid itself, cavalier perspective is a drawing method, and a solid can have different nets.

75. A box has 6 faces, 8 vertices, and 12 edges, and every face is an identical square. Which classification best fits it?

A polyhedron without a more specific classification
A cube, characterized by one side length
A rectangular prism, characterized by length, width, and height
A right prism with rectangular lateral faces and polygonal bases

A cube, characterized by one side length

Explanation

A cube has six identical square faces, eight vertices, and twelve edges, and is characterized by one side length. A general rectangular prism need not have square faces; the other choices either ignore the defining square faces or omit the more specific cube classification.

76. Which description identifies a cylinder of revolution?

One disk base, a vertex, and a curved lateral face
Two parallel, congruent disk bases and a curved lateral surface
Two parallel, congruent circular boundaries and a flat lateral face
One disk base, no vertex, and a curved lateral surface

Two parallel, congruent disk bases and a curved lateral surface

Explanation

A cylinder of revolution has two parallel, congruent disk bases and a curved lateral surface. The one-base-and-vertex description confuses it with a cone; circular boundaries are not disk bases; the one-base description omits a cylinder’s second base.

77. Which set of parts makes up a cone of revolution?

A disk base, a flat lateral face, and a vertex
Two disk bases, a curved lateral surface, and no vertex
A disk base, a second disk base, and a vertex
A disk base, a curved lateral face, and a vertex

A disk base, a curved lateral face, and a vertex

Explanation

A cone of revolution consists of a disk base, a curved lateral face, and a vertex. Two bases describe a cylinder; a second base is not part of a cone; and the lateral face is curved, not flat.

78. For a sphere centered at O with radius 5 cm, point P is 3 cm from O and point Q is 5 cm from O. Which classification is correct?

P lies on the sphere, while Q lies in the ball but not on the sphere
Q lies on the sphere, while P lies outside the ball
Q lies on the sphere, while P lies in the ball but not on the sphere
Both P and Q lie on the sphere because both are within 5 cm

Q lies on the sphere, while P lies in the ball but not on the sphere

Explanation

A sphere contains points at distance exactly equal to the radius, whereas a ball contains points at distance less than or equal to it. Treating the sphere as the ball includes P on the sphere; counting any point within 5 cm as on the sphere does too; excluding the boundary from the ball misclassifies Q.

79. Point M lies on the perpendicular bisector of segment AB. If MA is 7 cm, how long is MB?

7 cm
A length that cannot be determined
14 cm
3.5 cm

7 cm

Explanation

Every point on the perpendicular bisector of AB is equidistant from A and B, so MB equals MA, or 7 cm. The segment length is not the distance from M; perpendicularity does not make the distances unequal; and no doubling is required.

80. A circle has center O and radius 6 cm. Point X is 6 cm from O, while point Y is 4 cm from O. Which point lies on the circle?

Neither point X nor point Y
Both points X and Y
Point X only
Point Y only

Point X only

Explanation

A point lies on a circle when its distance from the center equals the radius, so X lies on it and Y does not. Including interior points confuses the circle with its disk; treating 4 cm as the required distance ignores the radius; measuring from the circumference uses the wrong reference.

81. A circular lid has a radius of 8 cm. What is its diameter?

10 cm
4 cm
16 cm
8 cm

16 cm

Explanation

The diameter is twice the radius, so d=2×8=16d = 2 \times 8 = 16 cm. Using 8 cm leaves the radius unchanged; dividing by two reverses the relationship; adding a fixed value does not apply the diameter rule.

82. A disk has center O and radius 5 cm. Point A is 5 cm from O, and point B is 2 cm from O. Which points belong to the disk?

Neither A nor B
Both A and B
Point A only
Point B only

Both A and B

Explanation

A disk contains every point whose distance from its center is less than or equal to the radius, so both A and B belong. Requiring distance exactly 5 cm confuses the disk with the circle; excluding A omits the boundary; including points beyond the radius would go outside the disk.

83. Two rays share endpoint P and form an angle. What is P called?

A side
An exterior point
The interior
The vertex

The vertex

Explanation

The common origin of the two rays is the angle’s vertex; a side is one of the rays, and the interior is the region between them.

84. An angle measures 124°. Which category describes it?

Straight angle
Right angle
Obtuse angle
Acute angle

Obtuse angle

Explanation

An obtuse angle measures more than 90° and less than 180°, so 124° is obtuse. Acute angles are below 90°, right angles are 90°, and straight angles are 180°.

85. One angle measures 37°, and a second angle is complementary to it. What is the second angle’s measure?

53°
37°
90°
143°

53°

Explanation

Complementary angles sum to 90°, so the second angle measures 90°−37°=53°90° - 37° = 53°. The 143° result uses the supplementary total, while 37° repeats the given angle.

86. Two parallel lines are crossed by a transversal. If one alternate interior angle measures 68°, what is the measure of its alternate interior partner?

68°
22°
112°
180°

68°

Explanation

Alternate interior angles formed by a transversal across parallel lines have equal measures, so the partner is 68°. The 112° result comes from incorrectly making the pair supplementary.

87. In an isosceles triangle, two sides meet at vertex P and have equal lengths. What follows about the angles opposite those equal sides?

They have equal measures
They sum to 180° individually
They are both right angles
They have different measures

They have equal measures

Explanation

In an isosceles triangle, the angles opposite the equal sides are the equal base angles. The principal vertex angle need not equal them, and the triangle need not be equilateral.

88. A triangle has three sides of equal length. Which description also correctly applies to it?

It is equilateral, with three 90° angles
It is equilateral, with three 60° angles
It is scalene, with three 60° angles
It is isosceles, with one 90° angle

It is equilateral, with three 60° angles

Explanation

An equilateral triangle has three equal sides and three equal angles, each 60°. A right angle is not implied by equal sides, and a scalene triangle has no equal sides.

89. Two angles of a triangle measure 48° and 67°. What is the third angle’s measure?

25°
132°
65°
115°

65°

Explanation

A triangle’s angles sum to 180°, so the third angle is 180°−48°−67°=65°180° - 48° - 67° = 65°. The 115° result adds the known angles rather than finding the remaining angle.

90. Which description defines a polygon?

A figure whose sides all have equal lengths
A figure made of several straight sides
A figure with exactly four sides
A figure enclosed by curved boundaries

A figure made of several straight sides

Explanation

A polygon is a figure with several straight sides. Curved boundaries do not fit the definition, equal lengths describe a regular polygon's side condition, and exactly four sides defines a quadrilateral.

91. A designer makes a polygon whose sides are all equal in length, but its angles are not all equal in measure. How should the polygon be classified?

A polygon with equal angles
Not a regular polygon
A quadrilateral
A regular polygon

Not a regular polygon

Explanation

A regular polygon must have both equal side lengths and equal angle measures, so the unequal angles rule out that classification. Equal sides alone are insufficient, and the description does not establish that it has four sides.

92. A polygon has four sides, four vertices, and four angles. What is it called?

A hexagon
A pentagon
A triangle
A quadrilateral

A quadrilateral

Explanation

A quadrilateral is a polygon with four sides, four vertices, and four angles. A triangle has three sides, a pentagon five, and a hexagon six.

93. A four-sided figure has each pair of opposite sides parallel. Which classification follows from this property?

A square
A rectangle
A rhombus
A parallelogram

A parallelogram

Explanation

A parallelogram is a quadrilateral whose opposite sides are parallel. Equal side lengths characterize a rhombus, while four right angles characterize a rectangle; a square has both properties.

94. In a right triangle, which side is the hypotenuse?

Either side forming the right angle
Any side adjacent to the right angle
The side opposite the right angle
The shorter side forming the right angle

The side opposite the right angle

Explanation

The hypotenuse lies opposite the right angle and is the triangle's longest side. A side forming the right angle is a leg, not the hypotenuse.

95. Triangle ABC is right-angled at A, with BA = 6 cm and AC = 8 cm. Which equation gives the length BC using the Pythagorean theorem?

82=BC2+628^2 = BC^2 + 6^2
BC=6+8BC = 6 + 8
BC2=62+82BC^2 = 6^2 + 8^2
62=BC2+826^2 = BC^2 + 8^2

$$BC^2 = 6^2 + 8^2$$

Explanation

Because the right angle is at A, BC is opposite it and is the hypotenuse, so its square equals the sum of the squares of BA and AC. The other equations incorrectly treat a leg as the hypotenuse or omit squaring the side lengths.

96. In triangle ABC, BC is the longest side and BC2=BA2+AC2BC^2 = BA^2 + AC^2. What conclusion follows?

Triangle ABC is right-angled at B
Triangle ABC is right-angled at A
Triangle ABC is right-angled at C
Triangle ABC has three equal sides

Triangle ABC is right-angled at A

Explanation

The converse states that if the longest side BC satisfies BC2=BA2+AC2BC^2 = BA^2 + AC^2, the triangle is right-angled at A. Calculating a missing side is an application of the theorem, while the right angle is opposite the longest side.

97. In a classical Thales configuration, A, M, B lie in that order on one line, A, N, C lie in that order on another, and MN is parallel to BC. If AM = 4, AB = 10, and MN = 6, what is the length of BC?

2.4
15
10
9

15

Explanation

Thales’ theorem gives ABAM=BCMN\frac{AB}{AM}=\frac{BC}{MN}, so BC=6×104=15BC=6\times\frac{10}{4}=15. The value 2.4 comes from reversing the ratio, while 9 and 10 do not preserve the corresponding side ratios.

98. Points A, M, B lie in that order on one line, and A, N, C lie in that order on another. If AM = 3, AB = 9, AN = 4, and AC = 12, what can be concluded about MN and BC?

MN is parallel to BC
MN is equal in length to BC
MN is perpendicular to BC
MN intersects BC at their midpoint

MN is parallel to BC

Explanation

The ratios are equal: AMAB=39=13\frac{AM}{AB}=\frac{3}{9}=\frac{1}{3} and ANAC=412=13\frac{AN}{AC}=\frac{4}{12}=\frac{1}{3}. With the points aligned in the same order, the converse establishes that MN is parallel to BC; proportional lengths do not imply perpendicularity or equal lengths.

99. In a right triangle, an acute angle has an adjacent side of length 8 and a hypotenuse of length 10. Which ratio gives the cosine of that angle?

810\frac{8}{10}
opposite side10\frac{\text{opposite side}}{10}
opposite side8\frac{\text{opposite side}}{8}
108\frac{10}{8}

$$\frac{8}{10}$$

Explanation

Cosine is adjacent side divided by hypotenuse, so the ratio is 810\frac{8}{10}. The opposite-side ratios correspond to sine or tangent, while 108\frac{10}{8} reverses the cosine ratio.

100. A right triangle has an acute angle whose opposite side is 5 units and whose hypotenuse is 13 units. Which expression gives the sine of the angle?

513\frac{5}{13}
adjacent side13\frac{\text{adjacent side}}{13}
5adjacent side\frac{5}{\text{adjacent side}}
135\frac{13}{5}

$$\frac{5}{13}$$

Explanation

Sine is the opposite side divided by the hypotenuse, giving 513\frac{5}{13}. Using the adjacent side confuses sine with cosine, using the adjacent side as denominator gives the tangent structure, and 135\frac{13}{5} inverts the ratio.

101. For an acute angle in a right triangle, the opposite side is 7 units and the adjacent side is 24 units. Which expression gives the tangent of the angle?

724\frac{7}{24}
7hypotenuse\frac{7}{\text{hypotenuse}}
247\frac{24}{7}
24hypotenuse\frac{24}{\text{hypotenuse}}

$$\frac{7}{24}$$

Explanation

Tangent is opposite side divided by adjacent side, so it is 724\frac{7}{24}. The expressions with the hypotenuse are sine and cosine forms, while 247\frac{24}{7} reverses the tangent ratio.

102. A student knows one acute angle and one side length in a right triangle and wants to find another side. What role can a trigonometric ratio play?

Establish that the triangle has a right angle from side labels
Identify the triangle’s area without using a side measurement
Verify that the three side lengths satisfy a perimeter condition
Relate the known angle and side to calculate the unknown side

Relate the known angle and side to calculate the unknown side

Explanation

Right-triangle trigonometric formulas relate an acute angle and a side to another side length, and can also determine an angle from two side lengths. A perimeter condition or area calculation is not the role described by these ratios, and the situation already specifies a right triangle.

103. A paper figure is folded along line d, and every point of the figure on one side lands on the matching point on the other side. Which transformation describes this correspondence?

Rotation about a center
Central symmetry about a point
Translation by a vector
Axial symmetry about line d

Axial symmetry about line d

Explanation

Axial symmetry maps a figure to one that coincides with it when folded along the axis. A half-turn describes central symmetry, a vector specifies a translation, and a center and angle specify a rotation.

104. Point A lies off line d. Its image A′ under axial symmetry is constructed so that line d is the perpendicular bisector of segment AA′. What happens to a point P that lies on d under the same symmetry?

P maps around d through a right angle
P maps to itself
P maps to a point across d
P maps along d by a fixed vector

P maps to itself

Explanation

A point on the axis of axial symmetry is unchanged by the transformation. A distinct reflected point applies the off-axis construction to a point on the axis; a vector shift and a quarter-turn describe different transformations.

105. A figure is turned through half a full revolution about point O and then coincides with its original position. Which transformation has been applied?

Axial symmetry across a line
Central symmetry about O
Rotation about O through a quarter-turn
Translation by a vector

Central symmetry about O

Explanation

Central symmetry about O maps a figure to one that coincides with it after a half-turn about O. Reflection uses an axis, translation moves without turning, and a quarter-turn is a different rotation angle.

106. A rigid figure is moved from its original position without turning; point A moves to A′. Which information specifies the translation applied to the figure?

The line through A and A′ as a mirror axis
The center of a half-turn
The vector from A to A′
A center and a specified turning angle

The vector from A to A′

Explanation

A translation moves a figure without turning it and is specified by a vector, such as the vector from A to A′. A mirror line defines axial symmetry, while a center and angle or a half-turn define rotations.

107. When 53 is divided by 8 using Euclidean division, which pair gives the quotient q and remainder r?

q = 7 and r = -3
q = 5 and r = 13
q = 6 and r = 5
q = 6 and r = 7

q = 6 and r = 5

Explanation

Euclidean division requires 53 = 8q + r with 0 ≤ r < 8; 53 = 8 × 6 + 5, so q = 6 and r = 5. A remainder of 7 does not fit the equality, 13 is not less than 8, and a negative remainder violates the required bound.

Study with flashcards

Lock in the answers with 95 flashcards on Measurement and Geometric Quantities.

Which digits does decimal numeration use?

The ten digits 0–9.

In 125,436, what is the hundreds digit?

4.

What are the three steps for solving a word problem?

Understand the situation, determine the calculation steps, and show the calculations with a sentence for each step.

See the flashcards →

Read the study guide

Go over the full study guide for Measurement and Geometric Quantities.

Read the study guide →

Related classes

Make your own practice quizzes

Upload your class notes and Revizly writes a practice quiz with explained answers in about a minute.

Quiz maker