One-Sample Hypothesis Testing Practice Quiz (38 questions)

All questions and answers

1. Which statement qualifies as a statistical hypothesis?

A claim about the numerical value of a population parameter
A summary of the numerical values observed in a sample
A qualitative judgment about an individual observation
A procedure for selecting observations from a population

A claim about the numerical value of a population parameter

Explanation

A statistical hypothesis makes a claim about a population parameter’s numerical value. A sample summary describes observed data, a sampling procedure describes how data are collected, and an individual judgment does not assert a population parameter value.

2. A researcher tests whether the population mean waiting time equals 12 minutes. Which statement is an appropriate null hypothesis?

The population mean waiting time equals 12 minutes
The sample mean waiting time equals 12 minutes
The population mean waiting time is below 12 minutes
The population mean waiting time differs from 12 minutes

The population mean waiting time equals 12 minutes

Explanation

The null hypothesis concerns a population parameter and commonly asserts that it equals a hypothesized value. The sample mean is a sample statistic, while “differs from” and “below” express alternative hypotheses.

3. When should a researcher accept the alternative hypothesis in a hypothesis test?

When the researcher first states it as the preferred claim
When the null hypothesis is formulated about a parameter
When the test fails to find convincing evidence against the null
When sample data provide convincing evidence for it

When sample data provide convincing evidence for it

Explanation

The alternative is accepted only when the sample data provide convincing evidence for it, which supports rejecting the null. A preferred claim or merely formulating the null does not provide that evidence, and failing to reject the null is not evidence supporting the alternative.

4. A test does not reject the null hypothesis that a population parameter equals a specified value. Which conclusion is justified?

There is insufficient evidence to support the alternative hypothesis
There is convincing evidence supporting the alternative hypothesis
The population parameter has been established as exactly equal to the specified value
The null hypothesis has been proven true

There is insufficient evidence to support the alternative hypothesis

Explanation

Failing to reject the null means the evidence is insufficient to support the alternative; it does not establish that the null is true. “Proven true” and “established as exactly equal” overstate what non-rejection shows, while claiming support for the alternative reverses the conclusion.

5. A test rejects a null hypothesis that is in fact true. What kind of error occurred, and what probability represents its risk?

A Type II error, with probability β set in advance
A Type I error, with probability β estimated after testing
A Type I error, with probability α set in advance
A Type II error, with probability α estimated after testing

A Type I error, with probability α set in advance

Explanation

Rejecting a true null hypothesis is a Type I error, whose probability is α, the significance level set in advance by the researcher. A Type II error is failing to reject a false null, and β is its probability.

6. A disease test uses a null hypothesis of no disease. A patient without the disease receives a positive result; which error does this represent?

A Type I error, or false negative
A Type II error, or false positive
A Type II error, or false negative
A Type I error, or false positive

A Type I error, or false positive

Explanation

With “no disease” as the null, a positive result for a person who is disease-free is a false positive, corresponding to rejection of a true null and thus a Type I error. A false negative is the opposite mistake: failing to detect disease when it is present.

7. A test statistic falls inside the rejection region determined by the critical-value method. Which decision procedure is being used?

The p-value method
A sampling-distribution estimation method
A confidence-interval method
The critical-value method

The critical-value method

Explanation

The critical-value method decides by checking whether the test statistic lies in a rejection region. The p-value method instead compares the p-value with α; a confidence interval is not the specified decision procedure here; estimating a sampling distribution does not define either method.

8. Assuming the null hypothesis is true, what does a p-value measure?

The probability that the null hypothesis is true
The probability of a result at least as extreme as observed
The probability of a result less extreme than observed
The preset probability of rejecting a true null hypothesis

The probability of a result at least as extreme as observed

Explanation

A p-value is the conditional probability, assuming H₀ is true, of obtaining a test statistic equal to or more extreme than the observed one. The probability that H₀ is true is not what it measures; using only less extreme outcomes reverses the comparison; the preset Type I error level is α.

9. A hypothesis test produces a p-value of 0.08 with significance level α=0.05\alpha=0.05. What decision follows the p-value rule?

Reject H₀
Change α to match the p-value
Do not reject H₀
Conclude that H₀ is proven true

Do not reject H₀

Explanation

Because 0.08 is greater than 0.05, the rule is to not reject H₀. Rejecting for a p-value above α reverses the rule; comparing with 1−α uses the wrong threshold; and failure to reject does not prove H₀ true.

10. A researcher has stated the hypotheses, checked assumptions, and calculated the test statistic. What should the researcher do next in the hypothesis-testing process?

Find critical values or a p-value
State a new pair of hypotheses
Check assumptions again as the next formal step
Write the contextual conclusion

Find critical values or a p-value

Explanation

After finding the test statistic, the process calls for finding critical values or a p-value, followed by a conclusion in context. Writing the conclusion skips the decision evidence; restating hypotheses or repeating the assumptions check does not follow the listed sequence.

11. A sample of n=25n=25 has mean Xˉ=52\bar X=52, and a population has known standard deviation σ=10\sigma=10. To test H0:μ=50H_0:\mu=50, what test statistic should be calculated?

ZSTAT=0.20Z_{STAT}=0.20
ZSTAT=−1.00Z_{STAT}=-1.00
ZSTAT=2.50Z_{STAT}=2.50
ZSTAT=1.00Z_{STAT}=1.00

$$Z_{STAT}=1.00$$

Explanation

Use ZSTAT=Xˉ−μ0σ/nZ_{STAT}=\frac{\bar X-\mu_0}{\sigma/\sqrt n}: the numerator is 52−50=2 and the standard error is 10/√25=2, giving 1.00. The value 0.20 omits the square root adjustment, −1.00 reverses the numerator, and 2.50 does not use the correct standard error.

12. For a bolt-diameter test, the test statistic is ZSTAT=−2.0Z_{STAT}=-2.0 and the two-tailed critical values at α=0.05\alpha=0.05 are −1.96 and 1.96. What is the decision?

Do not reject H₀ because −2.0 is above −1.96
Reject H₀ because −2.0 is below −1.96
Do not reject H₀ because −2.0 lies between the critical values
Reject H₀ because −2.0 is above 1.96

Reject H₀ because −2.0 is below −1.96

Explanation

For the stated two-tailed test, values below −1.96 or above 1.96 are in the rejection region, and −2.0 is below −1.96. The negative sign does not place it outside that region; the upper critical value is not the relevant boundary for this value; and −2.0 is not between the critical values.

13. A researcher tests a null hypothesis at significance level α=0.05\alpha=0.05 and obtains a p-value of 0.03. What decision should the researcher make?

Fail to reject the null hypothesis
Prove the alternative hypothesis
Increase the significance level
Reject the null hypothesis

Reject the null hypothesis

Explanation

Because the p-value is below α\alpha, the decision rule is to reject the null hypothesis. Rejection provides evidence against the null; it does not prove the alternative hypothesis.

14. A hypothesis test produces a high p-value. What is the most appropriate interpretation?

The sample is not sufficiently inconsistent with the null hypothesis, but the null is not proven true
The alternative hypothesis is supported because the p-value is high
The null hypothesis has been proven true because the test did not reject it
The sample strongly contradicts the null hypothesis, so the alternative is established

The sample is not sufficiently inconsistent with the null hypothesis, but the null is not proven true

Explanation

A high p-value indicates that the sample is not sufficiently inconsistent with the null hypothesis, but it does not establish that the null is true. Treating non-rejection as proof overstates what the test shows.

15. A small-sample mean test has unknown population standard deviation, with xˉ=52\bar{x}=52, μ0=50\mu_0=50, s=4s=4, and n=16n=16. What is the test statistic?

tstat=2.00t_{\text{stat}}=2.00
tstat=−2.00t_{\text{stat}}=-2.00
tstat=8.00t_{\text{stat}}=8.00
tstat=0.50t_{\text{stat}}=0.50

$$t_{\text{stat}}=2.00$$

Explanation

Use tstat=xˉ−μ0s/nt_{\text{stat}}=\frac{\bar{x}-\mu_0}{s/\sqrt{n}}: the numerator is 52−50=252-50=2 and the standard error is 4/16=14/\sqrt{16}=1, giving tstat=2.00t_{\text{stat}}=2.00. The value 0.50 results from omitting the square root in the standard error.

16. A one-sample t-test uses a sample of 18 observations at significance level α=0.05\alpha=0.05. Which distribution settings should be used to determine its critical value or p-value?

The t-distribution with df=19df=19 at α=0.05\alpha=0.05
The z-distribution with df=17df=17 at α=0.05\alpha=0.05
The t-distribution with df=18df=18 at α=0.05\alpha=0.05
The t-distribution with df=17df=17 at α=0.05\alpha=0.05

The t-distribution with $$df=17$$ at $$\alpha=0.05$$

Explanation

A one-sample t-test uses the t-distribution, with degrees of freedom df=n−1=18−1=17df=n-1=18-1=17, and the specified significance level. Using 18 degrees of freedom confuses the sample size with the degrees-of-freedom rule.

17. A sample of n=100n=100 has p^=0.30\hat{p}=0.30, and the null hypothesis specifies p0=0.25p_0=0.25. Which expression gives the one-sample proportion test statistic?

0.30−0.250.25(1−0.25)\frac{0.30-0.25}{\sqrt{0.25(1-0.25)}}
0.30−0.250.25/100\frac{0.30-0.25}{\sqrt{0.25/100}}
0.30−0.250.25(1−0.25)/100\frac{0.30-0.25}{\sqrt{0.25(1-0.25)/100}}
0.30−0.250.30(1−0.30)/100\frac{0.30-0.25}{\sqrt{0.30(1-0.30)/100}}

$$\frac{0.30-0.25}{\sqrt{0.25(1-0.25)/100}}$$

Explanation

A one-sample proportion z-test uses the null value in its standard error: Zstat=p^−p0p0(1−p0)/nZ_{\text{stat}}=\frac{\hat{p}-p_0}{\sqrt{p_0(1-p_0)/n}}. Using p^\hat{p} in the denominator substitutes the interval-style estimate, while omitting factors changes the required standard error.

18. A researcher tests a population proportion under p0=0.20p_0=0.20 with a sample size of n=100n=100. Which assessment applies the stated normal-approximation condition?

Use the approximation because the expected successes are at least 15.
Do not use the approximation because the sample proportion is unavailable.
Use the approximation because both expected counts are at least 15.
Do not use the approximation because both expected counts must exceed 20.

Use the approximation because both expected counts are at least 15.

Explanation

The condition requires both np0np_0 and n(1−p0)n(1-p_0) to be at least 15; here they are 20 and 80. Checking only successes ignores the second condition, and the stated threshold is 15 rather than 20.

19. A two-sided hypothesis test at significance level α=0.05\alpha=0.05 rejects H0:θ=12H_0: \theta=12. Which result is expected from a corresponding 95% confidence interval based on the same sample?

The interval excludes 12 and gives plausible values for the population parameter.
The interval excludes 12 and gives plausible values for the sample statistic.
The interval includes 12 and gives plausible values for the sample statistic.
The interval includes 12 and gives plausible values for the population parameter.

The interval excludes 12 and gives plausible values for the population parameter.

Explanation

When a null hypothesis is rejected, a confidence interval using the same significance level is expected to exclude the null value and indicate plausible population-parameter values. Including 12 conflicts with that rejection, while the interval concerns the population parameter rather than the sample statistic.

20. A researcher compares the average completion times of two independent groups, with completion time recorded numerically. Which target parameter should be used?

p1p_1
p1−p2p_1-p_2
μ1−μ2\mu_1-\mu_2
μ1\mu_1

$$\mu_1-\mu_2$$

Explanation

A difference in means for quantitative data is represented by μ1−μ2\mu_1-\mu_2. The proportion difference p1−p2p_1-p_2 applies to qualitative data, while μ1\mu_1 and p1p_1 describe single-group parameters rather than a difference.

21. A z-test uses a 5% significance level and has an upper-tailed alternative. Which critical value defines the rejection region?

z>2.33z>2.33
∣z∣>1.96|z|>1.96
z<−1.645z<-1.645
z>1.645z>1.645

$$z>1.645$$

Explanation

For an upper-tailed z-test at the 5% significance level, the critical value is 1.645, so the rejection region is z>1.645z>1.645. The cutoff z<−1.645z<-1.645 is lower-tailed, ∣z∣>1.96|z|>1.96 is two-tailed at 5%, and z>2.33z>2.33 is the 1% upper-tail cutoff.

22. A researcher constructs a 95% confidence interval for a population mean using the standard normal critical value. Which pair of critical values applies?

±1.645\pm1.645
±2.58\pm2.58
1.6451.645
±1.96\pm1.96

$$\pm1.96$$

Explanation

A 95% confidence interval uses the two-tailed 5% critical values, ±1.96\pm1.96; the corresponding two-tailed critical values are also used for confidence intervals. The pair ±1.645\pm1.645 corresponds to 10%, 1.6451.645 is a one-tailed cutoff, and ±2.58\pm2.58 corresponds to 1%.

23. An analyst draws independent random samples from two populations, with sample sizes n1=28n_1=28 and n2=42n_2=42. Are the stated conditions for large-sample inference about μ1−μ2\mu_1-\mu_2 met?

No; the samples must be paired
Yes; independent random sampling is sufficient
Yes; one sample size is at least 30
No; both sample sizes must be at least 30

No; both sample sizes must be at least 30

Explanation

Large-sample inference requires independent random samples and both sample sizes to be at least 30. A single large sample does not meet the size condition, and paired samples do not satisfy the required independent-sample design.

24. For two independent large samples, an analyst estimates a confidence interval for the difference in population means. Which standard error belongs in the interval?

s1n1+s2n2\sqrt{\frac{s_1}{n_1}+\frac{s_2}{n_2}}
s12n1+s22n2\sqrt{\frac{s_1^2}{n_1}+\frac{s_2^2}{n_2}}
sp1n1+1n2s_p\sqrt{\frac{1}{n_1}+\frac{1}{n_2}}
s12+s22\sqrt{s_1^2+s_2^2}

$$\sqrt{\frac{s_1^2}{n_1}+\frac{s_2^2}{n_2}}$$

Explanation

The large-sample interval uses the standard error s12n1+s22n2\sqrt{\frac{s_1^2}{n_1}+\frac{s_2^2}{n_2}}, estimating each population variance with its corresponding sample variance. The pooled standard error is associated with the small-sample equal-variance procedure.

25. A large-sample test compares two population means against a hypothesized difference of zero. Which expression gives the test statistic using the sample standard deviations?

xˉ1−xˉ2sp1n1+1n2\frac{\bar{x}_1-\bar{x}_2}{s_p\sqrt{\frac{1}{n_1}+\frac{1}{n_2}}}
(xˉ1−xˉ2)−0s12n1+s22n2\frac{(\bar{x}_1-\bar{x}_2)-0}{\sqrt{\frac{s_1^2}{n_1}+\frac{s_2^2}{n_2}}}
(xˉ1−xˉ2)−0s1n1+s2n2\frac{(\bar{x}_1-\bar{x}_2)-0}{\sqrt{\frac{s_1}{n_1}+\frac{s_2}{n_2}}}
xˉ1−xˉ2s12+s22\frac{\bar{x}_1-\bar{x}_2}{\sqrt{s_1^2+s_2^2}}

$$\frac{(\bar{x}_1-\bar{x}_2)-0}{\sqrt{\frac{s_1^2}{n_1}+\frac{s_2^2}{n_2}}}$$

Explanation

The large-sample statistic subtracts the hypothesized mean difference from the observed difference, then divides by the standard error formed from the two sample variances and sample sizes. The pooled standard error belongs to the small-sample equal-variance method.

26. A researcher plans small-sample inference for the difference between two population means. The samples are independent and random, and both populations are approximately normal, but their variances are not assumed equal. Are the small-sample conditions met?

No; both sample sizes must be at least 30
No; equal population variances are also required
Yes; normality makes equal variances unnecessary
No; the observations must be paired

No; equal population variances are also required

Explanation

Small-sample inference requires independent random samples, approximately normal populations, and equal population variances. Approximate normality does not replace the equal-variance condition, while the large-sample size threshold is not the stated small-sample requirement.

27. A researcher constructs a small-sample confidence interval for μ1−μ2\mu_1-\mu_2 from independent samples with equal population variances. Which multiplier and standard error should be used?

tα/2, n1+n2−2sp1n1+1n2t_{\alpha/2,\,n_1+n_2-2}s_p\sqrt{\frac{1}{n_1}+\frac{1}{n_2}}
zα/2s12n1+s22n2z_{\alpha/2}\sqrt{\frac{s_1^2}{n_1}+\frac{s_2^2}{n_2}}
tα/2, n1+n2−2s12n1+s22n2t_{\alpha/2,\,n_1+n_2-2}\sqrt{\frac{s_1^2}{n_1}+\frac{s_2^2}{n_2}}
tα/2, n1+n2sp1n1+1n2t_{\alpha/2,\,n_1+n_2}s_p\sqrt{\frac{1}{n_1}+\frac{1}{n_2}}

$$t_{\alpha/2,\,n_1+n_2-2}s_p\sqrt{\frac{1}{n_1}+\frac{1}{n_2}}$$

Explanation

The small-sample interval uses a t critical value with n1+n2−2n_1+n_2-2 degrees of freedom and the pooled-standard-deviation standard error. A z critical value is used in the large-sample method, while separate variance estimates do not reflect the pooled equal-variance procedure.

28. For a small-sample test of μ1−μ2\mu_1-\mu_2, the hypothesized difference is Δ0\Delta_0. Which expression is the correct test statistic?

(xˉ1−xˉ2)−Δ0sp21n1+1n2\frac{(\bar{x}_1-\bar{x}_2)-\Delta_0}{s_p^2\sqrt{\frac{1}{n_1}+\frac{1}{n_2}}}
xˉ1−xˉ2sp1n1+1n2\frac{\bar{x}_1-\bar{x}_2}{s_p\sqrt{\frac{1}{n_1}+\frac{1}{n_2}}}
(xˉ1−xˉ2)−Δ0s12n1+s22n2\frac{(\bar{x}_1-\bar{x}_2)-\Delta_0}{\sqrt{\frac{s_1^2}{n_1}+\frac{s_2^2}{n_2}}}
(xˉ1−xˉ2)−Δ0sp1n1+1n2\frac{(\bar{x}_1-\bar{x}_2)-\Delta_0}{s_p\sqrt{\frac{1}{n_1}+\frac{1}{n_2}}}

$$\frac{(\bar{x}_1-\bar{x}_2)-\Delta_0}{s_p\sqrt{\frac{1}{n_1}+\frac{1}{n_2}}}$$

Explanation

The small-sample test statistic compares the observed mean difference with the hypothesized difference and scales it by the pooled-standard-deviation standard error; its degrees of freedom are n1+n2−2n_1+n_2-2. Separate variance estimates correspond to the large-sample z procedure, and the denominator uses sps_p rather than sp2s_p^2.

29. A researcher compares two proportions using independent random samples. The sample-based expected success and failure counts are 18 and 22 in the first sample, and 16 and 24 in the second. Are the large-sample conditions for inference about the difference in proportions met?

No; the combined expected successes must reach 50
No; the samples need at least 30 observations each
Yes; each sample has at least 15 expected successes and failures
Yes; the condition applies to successes but not failures

Yes; each sample has at least 15 expected successes and failures

Explanation

The condition requires independent random samples and at least 15 expected successes and 15 expected failures in each sample; all four counts meet that threshold. Requiring 30 per sample confuses this rule with a large-sample condition for comparing means, while checking only combined counts or successes omits required checks.

30. A researcher constructs a large-sample confidence interval for the difference between two population proportions. Which expression gives the interval's general form?

The estimated difference plus a z critical value times its standard error
The estimated difference plus or minus a t critical value times its standard error
The estimated difference plus or minus a z critical value times its standard error
The estimated difference plus or minus a pooled standard error alone

The estimated difference plus or minus a z critical value times its standard error

Explanation

The large-sample interval is the estimated difference, p^1−p^2\hat{p}_1-\hat{p}_2, plus or minus zα/2z_{\alpha/2} times its standard error. A pooled standard error belongs to the equality test, a t critical value is not the stated form, and omitting the minus side fails to form an interval.

31. A confidence interval for the population difference p1−p2p_1-p_2 is from 0.029 to 0.391, where population 1 rates Method 1 as fair and population 2 rates Method 2 as fair. What conclusion follows?

Method 2 has a significantly higher fair-rating proportion
The two fair-rating proportions are equal
The interval does not establish a difference in proportions
Method 1 has a significantly higher fair-rating proportion

Method 1 has a significantly higher fair-rating proportion

Explanation

Because the entire interval for p1−p2p_1-p_2 is positive, the population proportion rating Method 1 fair is significantly higher. Saying Method 2 is higher reverses the difference's direction, and claiming no established difference or equality misreads an interval that excludes zero.

32. A study is designed to detect whether population 1 has a higher proportion than population 2. Which hypotheses express the appropriate one-sided test?

H0:p1=p2H_0:p_1=p_2; Ha:p1≠p2H_a:p_1\ne p_2
H0:p1=p2H_0:p_1=p_2; Ha:p1>p2H_a:p_1>p_2
H0:p1=p2H_0:p_1=p_2; Ha:p1<p2H_a:p_1<p_2
H0:p1>p2H_0:p_1>p_2; Ha:p1=p2H_a:p_1=p_2

$$H_0:p_1=p_2$$; $$H_a:p_1>p_2$$

Explanation

The null hypothesis for comparing two proportions states equality, and the directional alternative here is that population 1's proportion is larger. A not-equal alternative tests differences in either direction, an inequality in the null is misplaced, and a less-than alternative points the opposite way.

33. A researcher records each person's preferred transport mode and residential zone, then asks whether the variables are related in the population. Which procedure addresses this question?

A two-sample test of population means
A chi-squared test of independence
A chi-squared goodness-of-fit test
A one-proportion z test

A chi-squared test of independence

Explanation

A chi-squared test of independence assesses whether two categorical variables are independent in the population. A means test concerns quantitative outcomes, a one-proportion test concerns a single proportion, and goodness-of-fit compares one categorical distribution with a specified pattern.

34. In a contingency table, a cell has row total 40, column total 30, and overall sample size 200. What expected count should be used for that cell when calculating the chi-squared statistic?

The observed count in that cell
6
12
1.33

6

Explanation

The expected count is row total times column total divided by sample size: E=40×30200=6E=\frac{40\times30}{200}=6. Multiplying without dividing gives 1200, dividing the margins gives an unrelated ratio, and substituting the observed count does not calculate the null-expected count.

35. A public-health study tests whether vaccination status and infection status are associated in a population. Which hypotheses match a chi-squared test of independence?

The null says the variables are independent; the alternative says they are not independent
The null says the variables are associated; the alternative says they are independent
The null says the group means are equal; the alternative says they differ
The null says the variables are independent; the alternative also says they are independent

The null says the variables are independent; the alternative says they are not independent

Explanation

For an independence test, the null hypothesis is population independence and the alternative is non-independence, or association. Reversing these confuses the roles of null and alternative; statements about means concern a different kind of test, and independence cannot be the alternative in this test.

36. A random-sample contingency table has 10 expected counts, and 8 of them are at least 5. Does it satisfy the expected-count condition for a chi-squared independence test?

No; at least 9 of the expected counts must be at least 5
Yes; 80% of the observed counts are at least 5
No; every expected count must be at least 5
Yes; 80% of the expected counts are at least 5

Yes; 80% of the expected counts are at least 5

Explanation

The requirement is that at least 80% of expected counts are 5 or greater, and 8 of 10 meets it exactly; the counts also come from a random sample. Requiring every count or 9 of 10 is stricter than the stated rule, while the condition concerns expected rather than observed counts.

37. A cell has an observed count of 45 and an expected count of 25 under independence. What is its standardized residual?

4
20
-4
0.8

4

Explanation

The standardized residual is (O−E)/E(O-E)/\sqrt{E}, so (45−25)/25=20/5=4(45-25)/\sqrt{25}=20/5=4. Using the expected count directly gives 0.8, while reversing the difference gives -4.

38. Under a test of independence, a cell has a negative standardized residual. What does this indicate about its observed count relative to its expected count?

The expected count was smaller than the observed count
The observed and expected counts were equal
More observations were observed than expected
Fewer observations were observed than expected

Fewer observations were observed than expected

Explanation

A negative standardized residual indicates a deficit: the observed count is below the count expected under independence. Interpreting it as an excess reverses the sign meaning; the sign does not by itself compare expected counts across cells or imply equality.

Study with flashcards

Lock in the answers with 87 flashcards on One-Sample Hypothesis Testing.

What does a statistical hypothesis claim about a population parameter?

Its numerical value.

What does the null hypothesis, denoted H₀, usually represent?

The status quo or a claim about a population parameter.

When is the alternative hypothesis, denoted Hₐ or H₁, accepted?

When sample data provide convincing evidence for it.

See the flashcards →

Read the study guide

Go over the full study guide for One-Sample Hypothesis Testing.

Read the study guide →

Related classes

Make your own practice quizzes

Upload your class notes and Revizly writes a practice quiz with explained answers in about a minute.

Quiz maker