β Must-know
π Rejecting Hβ provides evidence supporting Hβ, whereas failing to reject Hβ means there is insufficient evidence to support Hβ and does not establish that Hβ is true.
Further detail
Rejecting Hβ supports Hβ; failing to reject Hβ does not prove Hβ.
β Must-know
π A critical-value method decides by checking whether the test statistic falls in a rejection region, whereas a p-value method compares the p-value with Ξ±.
π When the p-value is greater than Ξ±, do not reject Hβ; when the p-value is less than Ξ±, reject Hβ.
Further detail
For a two-tailed test, the p-value is twice the corresponding one-tailed p-value.
The sampling distribution under Hβ is used to judge whether an observed sample statistic is sufficiently far from the hypothesized value to reject Hβ.
State, check, calculate, compare, conclude.
β Must-know
π Formula - For a one-sample z-test of a population mean with known population standard deviation, the test statistic is .
Further detail
π If the population standard deviation Ο is unknown in the stated z-test, it is estimated with the sample standard deviation s.
For z-tests, critical values are obtained from a z-table or the last row of a t-table, using the significance level Ξ±.
The listed z-test critical values are: at Ξ± = 10%, lower-tailed β1.28 and upper-tailed 1.28; at Ξ± = 5%, lower-tailed β1.645 and upper-tailed 1.645, or two-tailed Β±1.96; at Ξ± = 1%, lower-tailed β2.33 and upper-tailed 2.33, or two-tailed Β±2.58.
π The conditions for inference with a z-test for a mean are the same as those for a z-interval for the mean.
In the bolt example, a random sample of 100 bolts has mean diameter 29.84 mm, the claimed population mean is 30 mm, and the assumed population standard deviation is 0.8 mm.
For the bolt example, the hypotheses are Hβ: ΞΌ = 30 mm and Hβ: ΞΌ β 30 mm, with Ξ± = 0.05 because no direction is specified.
β Must-know
π When the p-value is lower than the significance level Ξ±, reject the null hypothesis; when it is higher, fail to reject the null hypothesis.
π A high p-value means the sample is not sufficiently inconsistent with the null hypothesis, but it does not prove that the null hypothesis is true.
Further detail
For a two-tailed z-test with test statistic β2.0, the p-value is P(Z < β2.0) + P(Z > 2.0) = 0.0228 + 0.0228 = 0.0456.
For the bolt-diameter test of Hβ: ΞΌ = 30 mm, a p-value of 0.0456 is below Ξ± = 0.05, so the null hypothesis is rejected.
A low p-value challenges Hβ; a high p-value does not.
β Must-know
π Formula - When the population standard deviation is unknown and the sample is small, the mean-test statistic is .
π For a one-sample t-test, critical values or p-values are determined from the t-distribution using degrees of freedom and significance level Ξ±.
Further detail
In the hotel-room example, a sample of 25 hotels had a mean nightly cost of $172.50 and a standard deviation of $15.40; testing Hβ: ΞΌ = $168 against Hβ: ΞΌ > $168 gave with 24 degrees of freedom.
For the hotel-room test at Ξ± = 0.05, the critical t-value with 24 degrees of freedom is 1.711, so the statistic 1.46 does not fall in the rejection region.
For the hotel-room test, the p-value is between 5% and 10%; statistical software gives 7.85%, which exceeds Ξ± = 0.05, so the null hypothesis is not rejected.
An incomplete t-table may only bound a t-test p-value between two significance levels, while software can provide an exact p-value.
β Must-know
π Formula - For a one-sample proportion z-test, the test statistic is .
π The normal approximation for a proportion test is used when both and ; if both quantities are below 15, the method is not discussed.
Further detail
In the mailing-list example, 25 of 500 clients responded, giving a sample proportion of 5%; testing Hβ: p = 8% against Hβ: p < 8% gives .
For the mailing-list test, the p-value is 0.0068, which is below Ξ± = 0.05, so the null hypothesis is rejected in favor of a response rate below 8%.
π After rejecting a null hypothesis, a confidence interval based on the sample statistic can help indicate plausible values of the population parameter; using the same significance level, the null-hypothesis value is expected to lie outside the interval.
π For comparing two independent samples, the target parameter is for a difference in means with quantitative data, and for a difference in proportions with qualitative data.
Means compare quantitative data; proportions compare qualitative data.
For a z-test at significance levels 10%, 5%, and 1%, the lower-tailed critical values are β1.28, β1.645, and β2.33, and the upper-tailed values are 1.28, 1.645, and 2.33.
For a two-tailed z-test, the critical values at significance levels 10%, 5%, and 1% are Β±1.645, Β±1.96, and Β±2.58, respectively; the same critical values are used for confidence intervals.
β Must-know
π Large-sample inference about ΞΌβ β ΞΌβ requires independently and randomly selected samples from the two target populations, with nβ β₯ 30 and nβ β₯ 30.
π Formula - The large-sample confidence interval for ΞΌβ β ΞΌβ is .
π Formula - For a large-sample test of ΞΌβ β ΞΌβ, the test statistic is , using sample standard deviations to estimate the population standard deviations.
Further detail
For each pair of independent samples, calculate the difference between the two sample means; the sampling distribution of these differences is centered on the population mean difference ΞΌβ β ΞΌβ.
For the NYSE and NASDAQ samples (nβ = 121, nβ = 125; means 3.27 and 2.53; standard deviations 1.30 and 1.16), the 95% confidence interval for the mean dividend-yield difference, NYSE minus NASDAQ, is 0.43 to 1.05.
π A confidence interval for ΞΌβ β ΞΌβ that is entirely positive indicates a higher population mean for Population 1, whereas an interval containing zero does not establish a significant difference between the population means.
β Must-know
π Small-sample inference about ΞΌβ β ΞΌβ requires independent random samples, approximately normal distributions in both populations, and equal population variances.
π Formula - The small-sample confidence interval for ΞΌβ β ΞΌβ is , with nβ + nβ β 2 degrees of freedom.
π Formula - The small-sample test statistic for ΞΌβ β ΞΌβ is , with nβ + nβ β 2 degrees of freedom.
Further detail
π Formula - The pooled variance for two independent samples with equal population variances is .
π A confidence interval for ΞΌβ β ΞΌβ that contains zero does not establish a significant difference between the population means because the difference could be positive, negative, or zero.
β Must-know
π Large-sample inference about pβ β pβ requires independent random samples and, in each sample, at least 15 expected successes and 15 expected failures, checked using nβpΜβ, nβqΜβ, nβpΜβ, and nβqΜβ.
π Formula - The large-sample confidence interval for pβ β pβ has the form .
π Formula - For testing equality of two population proportions, the pooled estimate is and the test statistic is .
π For a two-proportion test, the null hypothesis states that the population proportions are equal, while the alternative may state that they differ, that population 1 is smaller, or that population 1 is larger.
Further detail
For each pair of independent samples, calculate the difference between the sample proportions; the sampling distribution of these differences is centered on the population proportion difference pβ β pβ.
For 63 of 78 employees rating Method 1 fair and 49 of 82 rating Method 2 fair, the 99% confidence interval for the difference in population proportions is 0.029 to 0.391.
In the employee fairness test, the sample proportions are 63/78 = 0.808 and 49/82 = 0.598, and the pooled estimate is 112/160 = 0.70.
β Must-know
π Formula - The chi-squared statistic is , where the expected count in cell is , with row total , column total , and sample size .
π For a test of independence, the null hypothesis states that the variables are independent in the population, while the alternative states that they are not independent.
π The chi-squared independence test requires counts from a random sample and sufficiently large expected counts, with at least 80% of expected counts at least 5.
Further detail
π Formula - For a contingency table with R rows and C columns, the degrees of freedom are .
β Must-know
π Formula - A cell's standardized residual is , where is the observed count and is the expected count.
Further detail
π Standardized residuals greater than +2 or less than -2 are considered extreme.
Two-Sample Target Parameters
| Comparison | Parameter | Data type |
|---|---|---|
| Difference in means | Quantitative | |
| Difference in proportions | Qualitative |
Take a 38-question practice quiz on One-Sample Hypothesis Testing, with every answer explained.
1. Which statement qualifies as a statistical hypothesis?
2. A researcher tests whether the population mean waiting time equals 12 minutes. Which statement is an appropriate null hypothesis?
Memorize the key concepts of One-Sample Hypothesis Testing with 87 flashcards.
What does a statistical hypothesis claim about a population parameter?
Its numerical value.
What does the null hypothesis, denoted Hβ, usually represent?
The status quo or a claim about a population parameter.
When is the alternative hypothesis, denoted Hβ or Hβ, accepted?
When sample data provide convincing evidence for it.
Upload your class notes and Revizly writes a study guide, a quiz and flashcards in about a minute.
Study guide maker