Study guide: VCE Physics Motion Fields and Waves

Course Outline

  1. Motion and Newtonian Mechanics
  2. Work Energy and Momentum
  3. Gravitational Fields and Orbits
  4. Electric Fields and Charged Particles
  5. Magnetic Forces Motors and Accelerators
  6. Induction Electricity and Transmission
  7. Wave Properties, Interference, Diffraction and Standing Waves
  8. Refraction and Electromagnetic Light
  9. Photons, Spectra and Matter Waves
  10. Special Relativity
  11. Experimental Investigation Skills
  12. Constants, Conversions and Prefixes

1. Motion and Newtonian Mechanics

Key Concepts & Definitions

  • Displacement: The change in position and is measured in metres.
  • Velocity: The rate of change of displacement and is measured in metres per second.
  • Acceleration: The rate of change of velocity and is measured in metres per second squared.
  • Inertia: An object's tendency to resist changes in motion.

★ Must-know

📌 A net force causes an object to accelerate.

📐 Formula - For constant acceleration, v=u+atv=u+at, where uu is initial velocity, vv is final velocity, aa is acceleration and tt is time.

📌 Newton's first law states that an object remains at rest or at constant velocity unless acted on by a net force.

📐 Formula - Newton's second law is ∑F=ma\sum F=ma.

📐 Formula - For projectile motion with negligible air resistance, horizontal velocity is vx=ucos⁡θv_x=u\cos\theta and horizontal displacement is x=ucos⁡θ tx=u\cos\theta\,t.

📐 Formula - For projectile motion with negligible air resistance, vertical velocity is vy=usin⁡θ−gtv_y=u\sin\theta-gt and vertical displacement is Δy=usin⁡θ t−12gt2\Delta y=u\sin\theta\,t-\frac12gt^2.

📐 Formula - Centripetal acceleration and force are ac=v2ra_c=\frac{v^2}{r} and Fc=mv2rF_c=\frac{mv^2}{r}, and circular speed is v=2πrTv=\frac{2\pi r}{T}.

📌 In circular motion, constant speed does not mean constant velocity because the direction changes, and centripetal force is the net inward force rather than an additional force.

Further detail

📐 Formula - For constant acceleration, Δx=ut+12at2\Delta x=ut+\frac12at^2.

📐 Formula - For constant acceleration, v2=u2+2aΔxv^2=u^2+2a\Delta x.

📐 Formula - For constant acceleration, Δx=(u+v)t2\Delta x=\frac{(u+v)t}{2}.

  • The gradient of a displacement–time graph gives velocity, and the gradient of a velocity–time graph gives acceleration.

2. Work Energy and Momentum

★ Must-know

📐 Formula - Work done by a force is W=FΔxcos⁡θW=F\Delta x\cos\theta.

📐 Formula - Kinetic energy, gravitational potential energy and elastic potential energy are Ek=12mv2E_k=\frac12mv^2, Eg=mgΔhE_g=mg\Delta h and Es=12kx2E_s=\frac12kx^2, respectively.

📐 Formula - Momentum is p=mvp=mv, and impulse is J=FΔt=ΔpJ=F\Delta t=\Delta p.

📐 Formula - For an isolated two-object system, conservation of momentum gives m1u1+m2u2=m1v1+m2v2m_1u_1+m_2u_2=m_1v_1+m_2v_2.

📌 An elastic collision conserves both momentum and kinetic energy, whereas an inelastic collision conserves momentum but not kinetic energy.

Further detail

📐 Formula - Power is P=WtP=\frac{W}{t} and, for a force acting along the motion, P=FvP=Fv.

📐 Formula - Hooke's law is F=−kxF=-kx.

  • Work transfers energy, energy is conserved in an isolated system, and the area under a force–displacement graph represents work.

  • The area under a force–compression graph represents elastic potential energy, and negative work transfers energy away from the object or system being considered.

  • In a perfectly inelastic collision, the objects stick together.

Memory Hook

Elastic collisions conserve kinetic energy; inelastic collisions do not.

3. Gravitational Fields and Orbits

★ Must-know

📐 Formula - The gravitational force between masses is Fg=GMmr2F_g=\frac{GMm}{r^2}, and gravitational field strength is g=GMr2g=\frac{GM}{r^2}.

  • A gravitational field points towards the mass creating it, and its strength decreases with the square of distance from that mass.

📐 Formula - For a circular satellite orbit, gravity supplies centripetal force, so GMmr2=mv2r\frac{GMm}{r^2}=\frac{mv^2}{r} and orbital speed is v=GMrv=\sqrt{\frac{GM}{r}}.

Further detail

  • In gravitational equations, rr is measured from the centre of the attracting body; near Earth's surface, use g=9.8 m s−2g=9.8\text{ m s}^{-2}.

📐 Formula - Near a uniform gravitational field, gravitational potential energy change is Eg=mgΔhE_g=mg\Delta h.

📐 Formula - The period of a circular orbit is T=2πrvT=\frac{2\pi r}{v}.

  • A satellite's orbital radius is measured from Earth's centre, and its altitude equals orbital radius minus Earth's radius.

  • A geostationary satellite has a one-day orbital period, is above the equator and orbits in Earth's direction of rotation.

Memory Hook

Gravity supplies centripetal force → a satellite follows a circular orbit.

4. Electric Fields and Charged Particles

Key Concepts & Definitions

  • Electric field direction: The direction of the force on a positive test charge.

★ Must-know

📐 Formula - Electric field strength is E=FqE=\frac{F}{q}; for a uniform field between plates it is E=VdE=\frac{V}{d}, and for a point charge it is E=k∣Q∣r2E=\frac{k|Q|}{r^2}.

📐 Formula - Coulomb's law gives the force magnitude between two point charges as F=k∣q1q2∣r2F=\frac{k|q_1q_2|}{r^2}.

📌 Like charges repel and unlike charges attract; electric fields are vectors, so their directions must be combined rather than only their magnitudes.

Further detail

📐 Formula - The electric force on a charge in a field is F=qEF=qE.

  • Positive charges create fields directed away from them, while negative charges create fields directed towards them.

  • Between two like charges, their electric fields can oppose one another and cancel at a point.

📐 Formula - The kinetic energy gained by a charge moving through a potential difference is ΔEk=qV\Delta E_k=qV; for a particle accelerated from rest, qV=12mv2qV=\frac12mv^2.

Memory Hook

Electric fields can change a particle’s energy; magnetic fields alone change its direction.

5. Magnetic Forces Motors and Accelerators

★ Must-know

📐 Formula - The magnetic force magnitude on a moving charge is F=∣q∣vBsin⁡θF=|q|vB\sin\theta, or F=∣q∣vBF=|q|vB when motion is perpendicular to the field.

  • Magnetic force is perpendicular to a moving charge's velocity and the magnetic field; if velocity is parallel to the field, the force is zero.

📐 Formula - A charged particle moving in a magnetic field follows a circular path of radius r=mv∣q∣Br=\frac{mv}{|q|B} when magnetic force supplies the centripetal force.

  • In an electric motor, a current-carrying coil in a magnetic field experiences forces on opposite sides that create a turning effect, and a split-ring commutator reverses current every half-turn to maintain rotation in the same direction.

📌 In a particle accelerator, an electric field increases charged particles' kinetic energy, whereas a magnetic field changes their direction and alone does not increase their kinetic energy.

Further detail

📐 Formula - The force magnitude on a current-carrying conductor is F=nIlBsin⁡θF=nIlB\sin\theta, or F=nIlBF=nIlB when the conductor is perpendicular to the field.

  • A magnetic force perpendicular to a particle's motion changes its direction but not its speed.

📌 When using a hand rule to find magnetic force direction, reverse the result for a negative charge.

  • A charged particle's circular path radius increases with mass or speed and decreases with charge magnitude or magnetic field strength.

  • Motor torque depends on current, magnetic field, coil turns and coil geometry.

6. Induction Electricity and Transmission

★ Must-know

📐 Formula - Faraday's law gives induced emf as ε=−NΔΦBΔt\varepsilon=-N\frac{\Delta\Phi_B}{\Delta t}.

📌 An induced emf occurs when magnetic flux changes; increasing the rate of flux change or the number of turns increases the induced emf.

📌 A generator converts mechanical energy into electrical energy as a rotating coil changes magnetic flux and induces emf; an alternator uses slip rings and produces AC, whereas a simple DC generator uses a split-ring commutator.

📐 Formula - Ohm's law is V=IRV=IR, and electrical power is P=VI=I2RP=VI=I^2R.

📐 Formula - The total resistance of series resistors is RT=R1+R2R_T=R_1+R_2, while for parallel resistors 1RT=1R1+1R2\frac1{R_T}=\frac1{R_1}+\frac1{R_2}.

📐 Formula - Transmission-line voltage drop and power loss are Vdrop=IlineRlineV_{\rm drop}=I_{\rm line}R_{\rm line} and Ploss=Iline2RlineP_{\rm loss}=I_{\rm line}^2R_{\rm line}.

Further detail

📐 Formula - Magnetic flux is ΦB=B⊥A\Phi_B=B_\perp A.

📌 Lenz's law states that induced current produces a magnetic effect that opposes the change in flux.

📐 Formula - AC frequency and period are related by f=1Tf=\frac1T; sinusoidal RMS voltage and current are VRMS=Vpeak2V_{\rm RMS}=\frac{V_{\rm peak}}{\sqrt2} and IRMS=Ipeak2I_{\rm RMS}=\frac{I_{\rm peak}}{\sqrt2}.

📐 Formula - For a sinusoidal wave, peak-to-peak voltage is Vpp=2VpeakV_{\rm pp}=2V_{\rm peak}.

  • Doubling rotation frequency doubles peak emf and halves the period when other factors remain constant.

📐 Formula - For an ideal transformer, V1V2=N1N2=I2I1\frac{V_1}{V_2}=\frac{N_1}{N_2}=\frac{I_2}{I_1}.

📌 Step-up transformers increase voltage and reduce current for the same power, lowering resistive transmission losses; ideal transformers conserve power.

  • A photovoltaic cell converts light energy into electrical energy as light produces mobile charge carriers in its semiconductor, and an inverter can convert its DC output into AC.

Memory Hook

Higher transmission voltage → lower current → smaller resistive losses.

7. Wave Properties, Interference, Diffraction and Standing Waves

Key Concepts & Definitions

  • Transverse wave: A wave with vibrations perpendicular to its direction of travel.
  • Longitudinal wave: A wave with vibrations parallel to its direction of travel.
  • Amplitude: The maximum displacement from equilibrium.
  • Wavelength: The distance between consecutive points in phase.
  • Frequency: The number of cycles per second.
  • Period: The time taken for one complete cycle.

★ Must-know

📐 Formula - Wave speed, frequency and wavelength satisfy v=fλv=f\lambda, and frequency and period satisfy f=1Tf=\frac1T.

  • Wave behaviours include:

    • reflection: bouncing off a boundary
    • refraction: changing speed and direction on entering another medium
    • diffraction: spreading around an obstacle or through a gap
    • interference: overlapping waves combining by superposition
  • Constructive interference occurs when the path difference is nλn\lambda, where nn is an integer.

  • Destructive interference occurs when the path difference is (n+12)λ(n+\frac12)\lambda, where nn is an integer.

📐 Formula - In Young's double-slit experiment, fringe spacing is Δx=λLd\Delta x=\frac{\lambda L}{d}, where λ\lambda is wavelength, LL is slit-to-screen distance and dd is slit separation.

  • Standing waves form by interference between waves travelling in opposite directions; nodes have zero displacement, antinodes have maximum displacement, and adjacent nodes are separated by λ/2\lambda/2.

Further detail

  • The central bright fringe has zero path difference, while the first dark fringe has a path difference of λ/2\lambda/2.

  • Fringe spacing increases with wavelength and screen distance, and decreases with slit separation.

📌 Diffraction is significant when the gap size is comparable to the wavelength.

Memory Hook

Transverse vibrations are perpendicular to travel; longitudinal vibrations are parallel.

8. Refraction and Electromagnetic Light

★ Must-know

📐 Formula - Snell's law relates refraction at a boundary by n1sin⁡θ1=n2sin⁡θ2n_1\sin\theta_1=n_2\sin\theta_2.

  • Entering a higher refractive-index medium decreases light speed and wavelength while frequency remains constant; entering a lower-index medium increases speed and wavelength while frequency remains constant.

📌 Total internal reflection occurs when light travels from higher to lower refractive index and its incidence angle exceeds the critical angle, given by sin⁡θc=n2n1\sin\theta_c=\frac{n_2}{n_1} for n1>n2n_1>n_2.

  • Light is a transverse electromagnetic wave whose electric and magnetic fields oscillate perpendicular to each other and to the direction of propagation; polarisation demonstrates its transverse nature.

Further detail

📐 Formula - Refractive index is n=cvn=\frac{c}{v}, and across a boundary n1v1=n2v2n_1v_1=n_2v_2.

📌 Refraction angles are measured from the normal, not from the surface.

  • Different wavelengths refract by different amounts; in glass violet generally refracts more than red, allowing white light to separate into component colours.

  • Interference and diffraction provide evidence for the wave behaviour of light.

9. Photons, Spectra and Matter Waves

★ Must-know

📐 Formula - Photon energy is given by E=hf=hcλE=hf=\frac{hc}{\lambda}, and photon momentum by p=hλp=\frac{h}{\lambda}.

📐 Formula - The maximum photoelectron kinetic energy is Ek(max⁡)=hf−ϕE_{k(\max)}=hf-\phi, where hh is Planck's constant, ff is light frequency and ϕ\phi is the work function.

📌 Increasing light intensity increases photocurrent by producing more electrons per second, whereas increasing frequency increases the maximum kinetic energy of emitted electrons.

  • Electrons absorb energy to move to higher discrete energy levels and emit a photon when moving to a lower level; the photon energy equals the magnitude of the energy difference, ΔE=hf=hcλ\Delta E=hf=\frac{hc}{\lambda}.

  • Every moving particle has a de Broglie wavelength λ=hp\lambda=\frac{h}{p}; greater momentum means a shorter wavelength.

Further detail

📌 Light below the threshold frequency causes no photoelectric emission, and increasing its intensity still produces no emission.

  • On a graph of maximum photoelectron kinetic energy against frequency, the gradient is hh, the frequency-axis intercept is the threshold frequency, and the vertical intercept is −ϕ-\phi; stopping potential relates to maximum electron kinetic energy.

  • The photoelectric effect demonstrates particle-like light, electron diffraction demonstrates wave-like electrons, and double-slit interference demonstrates wave-like light; single-particle experiments build an interference pattern over time.

📐 Formula - For an emitted photon, Ephoton=Einitial−EfinalE_{\rm photon}=E_{\rm initial}-E_{\rm final}, using the magnitude of the energy difference.

📐 Formula - For non-relativistic particles, momentum is p=mvp=mv and kinetic energy is Ek=12mv2E_k=\frac12mv^2.

  • Increasing electron energy increases its momentum and decreases its de Broglie wavelength, while electron diffraction demonstrates the wave-like behaviour of matter.

Memory Hook

A larger energy gap gives a higher photon frequency and shorter wavelength.

10. Special Relativity

Key Concepts & Definitions

  • Proper time: Measured in the frame where both events occur at the same location and is the shortest measured time interval between the events.
  • Proper length: Measured in the object's rest frame and is the longest measured length.

★ Must-know

  • The laws of physics are the same in all inertial frames, and the speed of light in a vacuum is constant for all inertial observers; an inertial frame is not accelerating, so constant-velocity motion is inertial but turning at constant speed is not.

📐 Formula - Time dilation relates observed and proper time by t=γt0t=\gamma t_0.

📐 Formula - Length contraction relates measured and proper length by L=L0γL=\frac{L_0}{\gamma}.

Further detail

📐 Formula - The Lorentz factor is γ=11−v2c2\gamma=\frac1{\sqrt{1-\frac{v^2}{c^2}}}.

📐 Formula - Rest energy is E0=mc2E_0=mc^2, total energy is Etotal=γmc2E_{\rm total}=\gamma mc^2, relativistic kinetic energy is Ek=(γ−1)mc2E_k=(\gamma-1)mc^2, and relativistic momentum is p=γmvp=\gamma mv.

  • From Earth's frame, moving muons have a longer observed lifetime, allowing more to reach Earth's surface than expected from their rest-frame lifetime alone.

  • Precise GPS timing must account for satellite motion and gravitational effects, so relativistic corrections are necessary for accurate GPS operation.

Memory Hook

Proper time is shortest; proper length is longest.

11. Experimental Investigation Skills

Key Concepts & Definitions

  • Experimental variables: An independent variable is deliberately changed, a dependent variable is measured, and a controlled variable is kept constant.

★ Must-know

📌 Accuracy is closeness to the true value, precision is closeness of repeated measurements, repeatability is consistency under the same conditions, and reproducibility is consistency when conditions or investigators change.

📌 Random error causes scatter in results, systematic error shifts results consistently, and a human mistake is an error in carrying out or recording a procedure rather than measurement uncertainty.

  • An evaluation states whether results support the hypothesis, quotes a specific trend or value, identifies a limitation or error source, explains its effect on results, and suggests a practical improvement.

Further detail

  • Validity is whether a method tests what it is intended to test, resolution is the smallest change an instrument can measure, and uncertainty is an estimate of doubt in a measurement.

📌 Graphs place the independent variable on the horizontal axis and dependent variable on the vertical axis, label axes with quantities and units, use an appropriate scale, plot all data accurately, add uncertainty bars when required, and use a best-fit line or smooth curve.

  • Graph gradient is the change in vertical quantity divided by the change in horizontal quantity, and the area under a graph can represent a physical quantity depending on the axes.

Memory Hook

Evaluate in order: support, evidence, limitation, effect, improvement.

12. Constants, Conversions and Prefixes

★ Must-know

  • The formula-sheet constants are g=9.8 m s−2g=9.8\text{ m s}^{-2}, c=3.0×108 m s−1c=3.0\times10^8\text{ m s}^{-1}, h=6.63×10−34 J sh=6.63\times10^{-34}\text{ J s}, h=4.14×10−15 eV sh=4.14\times10^{-15}\text{ eV s}, G=6.67×10−11G=6.67\times10^{-11}, ME=5.98×1024 kgM_E=5.98\times10^{24}\text{ kg}, RE=6.37×106 mR_E=6.37\times10^6\text{ m}, me=9.1×10−31 kgm_e=9.1\times10^{-31}\text{ kg}, e=1.6×10−19 Ce=1.6\times10^{-19}\text{ C}, and k=8.99×109k=8.99\times10^9.

Further detail

  • Convert km/h to m/s by dividing by 3.6; convert mm, cm and nm to m by multiplying by 10−310^{-3}, 10−210^{-2} and 10−910^{-9} respectively.

  • Convert keV to eV by multiplying by 10310^3, eV to J by multiplying by 1.6×10−191.6\times10^{-19}, and tonnes to kg by multiplying by 10310^3.

  • The prefixes kilo, mega and giga represent 10310^3, 10610^6 and 10910^9, while milli, micro, nano and pico represent 10−310^{-3}, 10−610^{-6}, 10−910^{-9} and 10−1210^{-12} respectively.

Synthesis Tables

Photoelectric effect: changes and outcomes

ChangeOutcome
Increase intensityGreater photocurrent; more electrons emitted per second
Increase frequencyGreater maximum kinetic energy of emitted electrons
Frequency below thresholdNo photoelectric emission
Increase intensity below thresholdStill no photoelectric emission

Test yourself

Take a 41-question practice quiz on VCE Physics Motion Fields and Waves, with every answer explained.

1. A cart’s velocity changes from 2 m/s east to 6 m/s east while a net force acts on it. What does the net force cause?

2. A cyclist moving at 4 m/s accelerates at 3 m/s² for 2 s. What is the cyclist’s final velocity?

Take the quiz →

Study with flashcards

Memorize the key concepts of VCE Physics Motion Fields and Waves with 94 flashcards.

What does a net force cause an object to do?

Accelerate.

For constant acceleration, what equation relates final velocity, initial velocity, acceleration, and time?

v=u+atv=u+at

What formula gives work done by a force?

W=FΔxcos⁡θW=F\Delta x\cos\theta

See the flashcards →

Related classes

Make your own study guides

Upload your class notes and Revizly writes a study guide, a quiz and flashcards in about a minute.

Study guide maker