β Must-know
π In an external-combustion engine, fuel burns outside the engine working space and heat crosses a boundary to reach the working fluid; in an internal-combustion engine, fuel burns inside the working space and releases heat directly into the working fluid, which includes combustion products.
Further detail
Combustion is a high-temperature chemical oxidation process involving fuel and air.
The cylinder working space is bounded by the cylinder head, cylinder liner, and piston crown, and the working-fluid pressure acts on the piston crown during expansion to produce mechanical work.
Combustion releases heat β the working fluid expands β mechanical work is produced.
β Must-know
Engine elements form three functional groups:
The engine group contains the fixed structure and the moving mechanism that transmits mechanical work.
The main fixed parts are:
Further detail
The cylinder head closes the upper part of the cylinder, while the intake and exhaust manifolds guide gases into and out of the cylinder.
The cylinder block contains and supports the cylinders, the upper crankcase supports the crankshaft region, and the lower crankcase or oil pan closes the bottom and stores lubricating oil.
β Must-know
The moving mechanism converts reciprocating piston motion into crankshaft rotation by transmitting cylinder-pressure force through the piston, piston pin, connecting rod, and crank throw to the crankshaft.
The crankshaft converts transmitted forces into rotary motion and delivers torque to the flywheel.
Further detail
Piston rings seal the cylinder and control oil, while the piston pin connects the piston to the connecting rod.
The connecting rod transmits force between the piston and crank throw; its small end follows piston motion while its big end moves around the crankshaft axis.
β Must-know
π Formula - The compression ratio is the dimensionless ratio of maximum cylinder volume at BDC to minimum clearance volume at TDC: .
π Formula - For bore and stroke , the swept volume of one cylinder is ; when and are in millimetres, .
π Formula - Total engine displacement equals the swept volume of one cylinder multiplied by the cylinder count: .
Further detail
π Formula - Total cylinder volume is the sum of clearance and swept volumes: .
TDC is the minimum-volume extreme; BDC is the maximum-volume extreme.
β Must-know
The fuel system meters and delivers the required fuel quantity, and the cooling system limits component temperature.
Engine surveillance instruments measure:
Further detail
The lubrication system reduces friction and removes heat from moving components, while the valve timing system controls intake and exhaust events.
The ignition system initiates combustion in spark-ignition engines, and supercharging, when fitted, increases inducted air mass.
Engine power can be determined from engine torque and engine speed.
Control equipment uses measured information to regulate engine operation.
β Must-know
Further detail
Fixed parts form and support the engine structure, while bore, stroke, and cylinder volumes define its basic geometry.
Auxiliary systems support engine operation, while surveillance and control equipment monitors and regulates the operating regime.
β Must-know
π Spark-ignition engines start combustion with an electric spark between spark-plug electrodes and use an idealized Otto cycle with constant-volume heat addition; compression-ignition engines inject fuel into highly compressed, hot air for self-ignition and use an idealized Diesel cycle with constant-pressure heat addition.
Further detail
Gasoline or petrol is a mixture of light hydrocarbons, whereas diesel oil or gas oil is a mixture of heavy hydrocarbons.
Engine applications include:
A spark ignites the Otto mixture; compressed-air heat self-ignites Diesel fuel.
β Must-know
π A four-stroke engine completes one operating cycle in four piston strokes and two crankshaft revolutions, spanning 720Β°CA, whereas a two-stroke engine completes it in two piston strokes and one crankshaft revolution, spanning 360Β°CA.
Further detail
Four-stroke: intake, compression, combustion, expansion, exhaust.
β Must-know
π Formula - For crankshaft speed in rpm and strokes per cycle, cycle frequency is cycles per second, and cycle period is seconds per cycle.
π Formula - Crankshaft angular speed and time for a crank-angle interval are related by rad/s and s, where is in rpm and is in degrees crank angle.
π Formula - Mean piston speed is m/s when stroke is in metres and speed is in rpm, or m/s when is in millimetres.
Further detail
Crank angle is measured in degrees crank angle (Β°CA); one crankshaft revolution is 360Β°CA and a four-stroke cycle spans 720Β°CA.
Approximate mean piston-speed ranges are 4β6.5 m/s for low-speed engines, 6.5β10 m/s for medium-speed engines, and 10β17 m/s for high-speed engines.
β Must-know
A pβΞ± diagram plots cylinder pressure against crank angle and marks EVC, IVC, EVO, and IVO valve events, spark discharge or injection onset (s), maximum cylinder pressure (y), and the end of heat release (t).
Cylinder volume is minimum at TDC and maximum at BDC, increasing as the piston moves from TDC to BDC and decreasing as it moves from BDC to TDC.
For well-phased combustion, approximately one third of the combustion duration occurs before TDC and two thirds after TDC, increasing the high-pressure area of the pressure diagram and the mechanical work produced during the cycle.
Further detail
The geometric cylinder-volume pattern repeats every crankshaft revolution, and the VβΞ± diagram represents this variation through the cycle.
Intake and exhaust valves may be open simultaneously during valve overlap, and valve opening and closing need not occur exactly at TDC or BDC.
Take a 21-question practice quiz on Heat Engine Fundamentals, with every answer explained.
1. Which description best explains how a heat engine produces mechanical work?
2. What happens to the working fluid's composition over an engine cycle?
Memorize the key concepts of Heat Engine Fundamentals with 78 flashcards.
What does a heat engine convert part of combustion heat into?
Mechanical work.
Where does fuel burn in an external-combustion engine?
Outside the engine working space.
How does heat reach the working fluid in an external-combustion engine?
It crosses a boundary to reach the working fluid.
Upload your class notes and Revizly writes a study guide, a quiz and flashcards in about a minute.
Study guide maker