VCE Physics Motion Fields and Waves Practice Quiz (41 questions)

All questions and answers

1. A cart’s velocity changes from 2 m/s east to 6 m/s east while a net force acts on it. What does the net force cause?

A displacement eastward
An acceleration eastward
A mass increase
A constant velocity eastward

An acceleration eastward

Explanation

A net force causes acceleration, which is a change in velocity. Constant velocity describes motion without acceleration, and displacement or mass increase is not the stated effect of net force.

2. A cyclist moving at 4 m/s accelerates at 3 m/s² for 2 s. What is the cyclist’s final velocity?

6 m/s
24 m/s
10 m/s
−2 m/s

10 m/s

Explanation

For constant acceleration, v=u+atv=u+at, so v=4+(3)(2)=10v=4+(3)(2)=10 m/s. The value 6 omits the initial velocity, −2 reverses the change, and 24 incorrectly multiplies all three quantities.

3. A spacecraft is coasting at constant velocity in deep space, with negligible external forces. What does Newton’s first law predict?

It moves at constant acceleration
It continues at constant velocity
It accelerates in its direction of travel
It gradually slows to rest

It continues at constant velocity

Explanation

Newton’s first law says an object remains at rest or continues at constant velocity unless acted on by a net force. The forward-force and slowing-to-rest choices incorrectly treat motion as requiring a continuing force, while constant acceleration would change its velocity.

4. A 5 kg trolley experiences a net force of 20 N. What is its acceleration?

4 m/s²
100 m/s²
20 m/s²
0.25 m/s²

4 m/s²

Explanation

Newton’s second law gives a=∑F/ma=\sum F/m, so a=20/5=4a=20/5=4 m/s². The value 0.25 inverts the ratio, 20 treats force as acceleration, and 100 multiplies force by mass.

5. A worker pushes a crate 5 m with a 40 N force directed 60° to the displacement. How much work does the force do?

173 J
100 J
0 J
200 J

100 J

Explanation

Work is W=FΔxcos⁡θW=F\Delta x\cos\theta, giving W=(40)(5)cos⁡60∘=100W=(40)(5)\cos 60^\circ=100 J. The 200 J choice ignores the angle, 173 J uses the sine component, and zero would apply to a force perpendicular to the displacement.

6. A 2 kg ball moves at 3 m/s. What is its kinetic energy?

9 J
3 J
6 J
18 J

9 J

Explanation

Kinetic energy is Ek=12mv2E_k=\frac12mv^2, so Ek=12(2)(32)=9E_k=\frac12(2)(3^2)=9 J. The 18 J choice omits the one-half factor, 6 J uses mass times speed, and 3 J does not apply the kinetic-energy formula.

7. A 3 kg object moves at 4 m/s. What is its momentum?

12 kg·m/s
24 kg·m/s
48 kg·m/s
0.75 kg·m/s

12 kg·m/s

Explanation

Momentum is p=mvp=mv, so p=(3)(4)=12p=(3)(4)=12 kg·m/s. The value 0.75 inverts the relationship, 24 is the kinetic energy in joules, and 48 incorrectly squares the velocity.

8. After a collision, two carts have the same total momentum as before, but their total kinetic energy is lower. How is the collision classified?

A non-isolated collision
A perfectly inelastic collision
An inelastic collision
An elastic collision

An inelastic collision

Explanation

An inelastic collision conserves momentum but not kinetic energy, matching the stated changes. An elastic collision also conserves kinetic energy, while a perfectly inelastic collision specifically involves the objects sticking together.

9. A probe of mass mm is at distance rr from the centre of a planet of mass MM. Which expression gives the gravitational force on the probe?

GmMr2\frac{Gm}{Mr^2}
GMmr\frac{GMm}{r}
GMr2\frac{GM}{r^2}
GMmr2\frac{GMm}{r^2}

$$\frac{GMm}{r^2}$$

Explanation

The gravitational force between two masses is Fg=GMmr2F_g=\frac{GMm}{r^2}. The expression without mm is field strength, while the other distractors misstate the distance dependence or mass factors.

10. A spacecraft moves from distance rr to distance 2r2r from a planet’s centre. How does the planet’s gravitational field at the spacecraft change?

It points away from the planet and becomes one-quarter as strong.
It points toward the planet and becomes one-quarter as strong.
It points toward the planet and remains equally strong.
It points toward the planet and becomes half as strong.

It points toward the planet and becomes one-quarter as strong.

Explanation

A gravitational field points toward its attracting mass and decreases with the square of distance, so doubling the distance reduces its strength to one-quarter. Half strength reflects inverse-distance scaling; unchanged strength ignores the distance effect, and an outward direction reverses the field direction.

11. A satellite moves in a circular orbit around a planet of mass MM at orbital radius rr. Which expression gives its orbital speed when gravity supplies the centripetal force?

GMr2\sqrt{\frac{GM}{r^2}}
GMr\sqrt{\frac{GM}{r}}
GMr\frac{GM}{r}
GMr\sqrt{GMr}

$$\sqrt{\frac{GM}{r}}$$

Explanation

Equating gravitational and centripetal forces and solving gives v=GMrv=\sqrt{\frac{GM}{r}}. The other expressions fail to solve the force relation correctly or place the radius incorrectly.

12. At a point between two positive charges, the electric field produced by the left charge points right while the field produced by the right charge points left. How should the net field be determined?

Reverse both directions because positive charges attract.
Subtract the opposing field vectors, allowing them to cancel if equal.
Add the field magnitudes because both charges are positive.
Keep only the field from the nearer charge because cancellation is impossible.

Subtract the opposing field vectors, allowing them to cancel if equal.

Explanation

Electric fields are vectors, so opposing contributions must be combined with their directions; equal opposing fields produce zero net field. Adding magnitudes ignores direction, attraction misstates the behavior of like charges, and opposing fields can cancel.

13. A particle with charge magnitude 2.0×10−6 C2.0\times10^{-6}\,\text{C} moves at 3.0×104 m/s3.0\times10^4\,\text{m/s} perpendicular to a 0.50 T0.50\,\text{T} magnetic field. What is the magnetic force magnitude?

0 N0\,\text{N}
3.0×10−2 N3.0\times10^{-2}\,\text{N}
1.5×10−2 N1.5\times10^{-2}\,\text{N}
6.0×10−2 N6.0\times10^{-2}\,\text{N}

$$3.0\times10^{-2}\,\text{N}$$

Explanation

For perpendicular motion, F=∣q∣vB=(2.0×10−6)(3.0×104)(0.50)=3.0×10−2 NF=|q|vB=(2.0\times10^{-6})(3.0\times10^4)(0.50)=3.0\times10^{-2}\,\text{N}. The smaller value reflects an extra factor of two, the larger value doubles the result, and zero incorrectly treats perpendicular motion as parallel.

14. A charged particle travels parallel to a uniform magnetic field. What magnetic force acts on it?

A force acts perpendicular to its direction of travel.
A force acts along its direction of travel.
A force acts opposite to the magnetic field.
No magnetic force acts on it.

No magnetic force acts on it.

Explanation

The magnetic force is zero when velocity is parallel to the field; when present, it is perpendicular to both velocity and field. Perpendicular-motion reasoning, a force along the field, and the assumption that motion alone guarantees a force each misapply this rule.

15. A particle moves perpendicular to a magnetic field. If its speed doubles while its mass, charge magnitude, and field strength remain unchanged, how does its circular-path radius change?

It remains unchanged.
It is halved.
It becomes four times as large.
It doubles.

It doubles.

Explanation

The radius is r=mv∣q∣Br=\frac{mv}{|q|B}, so it is directly proportional to speed when the other quantities are fixed. Halving the radius reverses that relationship, an unchanged radius omits the speed dependence, and quadrupling it applies an unsupported squared dependence.

16. A motor coil is rotating, and its current reverses every half-turn. What does the split-ring commutator accomplish?

It increases the magnetic field to keep the coil turning.
It maintains alternating current without reversing the coil current.
It increases the coil's electrical energy at each half-turn.
It reverses the coil current to keep rotation in the same direction.

It reverses the coil current to keep rotation in the same direction.

Explanation

A split-ring commutator reverses current every half-turn so the turning effect continues to drive rotation in the same direction. Slip rings do not provide this motor current-reversal function, and neither increasing the field nor adding electrical energy describes the commutator's role.

17. A coil has 120120 turns, and the magnetic flux through each turn changes by 0.030 Wb0.030\,\text{Wb} in 0.20 s0.20\,\text{s}. What is the magnitude of the induced emf?

36 V36\,\text{V}
0.0060 V0.0060\,\text{V}
18 V18\,\text{V}
0.15 V0.15\,\text{V}

$$18\,\text{V}$$

Explanation

Faraday's law gives the magnitude ∣ε∣=NΔΦBΔt=120×0.0300.20=18 V|\varepsilon|=N\frac{\Delta\Phi_B}{\Delta t}=120\times\frac{0.030}{0.20}=18\,\text{V}. The smaller values omit the turns or mishandle the time interval, while 36 V36\,\text{V} doubles the flux change.

18. Two coils experience the same change in magnetic flux. Coil X has twice as many turns as coil Y, and the flux changes in the same time in both. Which comparison is correct?

Coil X has half the induced emf of coil Y.
Neither coil has an induced emf.
Coil X has twice the induced emf of coil Y.
Both coils have the same induced emf.

Coil X has twice the induced emf of coil Y.

Explanation

Induced emf increases with the number of turns for a given rate of flux change, so twice as many turns gives twice the emf. The equal and half-sized comparisons disregard or reverse this dependence, while a changing flux does induce emf.

19. A rotating-coil generator uses slip rings and produces alternating current. Which type of generator is it?

An alternator.
A simple DC generator.
A transformer.
An electric motor.

An alternator.

Explanation

An alternator uses slip rings and produces AC as a rotating coil changes magnetic flux and induces emf. A simple DC generator uses a split-ring commutator, a motor converts electrical energy to mechanical motion, and a transformer is not a rotating-coil generator.

20. A transmission line carries 10 A10\,\text{A} through a resistance of 2.0 Ω2.0\,\Omega. What power is lost in the line?

200 W200\,\text{W}
20 W20\,\text{W}
400 W400\,\text{W}
40 W40\,\text{W}

$$200\,\text{W}$$

Explanation

The line loss is Ploss=Iline2Rline=(10)2(2.0)=200 WP_{\rm loss}=I_{\rm line}^2R_{\rm line}=(10)^2(2.0)=200\,\text{W}. 20 W20\,\text{W} is the voltage drop in volts, 40 W40\,\text{W} omits squaring the current, and 400 W400\,\text{W} incorrectly squares the resistance.

21. A wave travels at 18 m s−118\,\text{m s}^{-1} with a frequency of 6 Hz6\,\text{Hz}. What is its wavelength?

13 m\frac{1}{3}\,\text{m}
18 m18\,\text{m}
108 m108\,\text{m}
3 m3\,\text{m}

$$3\,\text{m}$$

Explanation

Using v=fλv=f\lambda gives λ=vf=186=3 m\lambda=\frac{v}{f}=\frac{18}{6}=3\,\text{m}. The value 108 m108\,\text{m} comes from multiplying, 13 m\frac{1}{3}\,\text{m} reverses the ratio, and 18 m18\,\text{m} does not use the given frequency correctly.

22. A pulse moves to the right along a rope while each point on the rope moves up and down. How is this wave classified?

A mechanical wave
A transverse wave
A standing wave
A longitudinal wave

A transverse wave

Explanation

The rope’s vibration is perpendicular to the pulse’s direction of travel, which defines a transverse wave. A longitudinal wave vibrates parallel to travel, while “mechanical” describes a wave requiring a medium and “standing” describes a wave pattern.

23. A water wave passes through a narrow opening and then spreads into the region beyond it. Which wave behavior does this illustrate?

Interference
Diffraction
Refraction
Reflection

Diffraction

Explanation

Diffraction is the spreading of a wave as it passes through a gap or around an obstacle. Refraction involves a change in speed and direction at a medium boundary, reflection is bouncing from a boundary, and interference is the superposition of overlapping waves.

24. Two coherent waves of wavelength 8 cm8\,\text{cm} arrive at a point with a path difference of 12 cm12\,\text{cm}. What type of interference occurs there?

Constructive interference
Complete reflection
No interference
Destructive interference

Destructive interference

Explanation

The path difference is 12/8=1.512/8=1.5 wavelengths, or (1+12)λ\left(1+\frac12\right)\lambda, so the waves interfere destructively. Constructive interference requires an integer multiple of the wavelength; a quarter-wavelength condition and reflection do not describe this path-difference rule.

25. A ray travels from a medium with refractive index 1.21.2 into one with refractive index 1.51.5 at an incidence angle of 30∘30^\circ. Using Snell’s law, what is the sine of the refracted angle?

0.800.80
0.500.50
0.400.40
0.6250.625

$$0.40$$

Explanation

Snell’s law gives sin⁡θ2=n1n2sin⁡θ1=1.21.5×0.5=0.40\sin\theta_2=\frac{n_1}{n_2}\sin\theta_1=\frac{1.2}{1.5}\times0.5=0.40. The value 0.6250.625 reverses the index ratio, 0.500.50 omits its effect, and 0.800.80 results from using the cosine instead of the sine.

26. Light enters a glass layer with a higher refractive index than the material it came from. What happens to its speed, wavelength, and frequency in the glass?

Speed and wavelength decrease; frequency stays constant
Speed and frequency decrease; wavelength stays constant
Speed decreases; wavelength increases and frequency stays constant
Speed and wavelength increase; frequency stays constant

Speed and wavelength decrease; frequency stays constant

Explanation

On entering a higher-index medium, light slows and its wavelength decreases, while its frequency remains constant across the boundary. The alternatives either change frequency, apply the lower-index behavior, or give the wrong wavelength change.

27. A ray travels from a medium with refractive index 1.61.6 toward one with refractive index 1.21.2. Its incidence angle is greater than the critical angle. What occurs at the boundary?

Total internal reflection only when traveling from lower to higher index
Refraction at the critical angle
Total internal reflection
Refraction into the lower-index medium

Total internal reflection

Explanation

Total internal reflection occurs when light travels from higher to lower refractive index and its incidence angle exceeds the critical angle. Refraction into the second medium misses that threshold, and the reverse index direction does not meet the condition.

28. An experiment shows that light can be polarised. What does this observation demonstrate about light?

Light’s electric and magnetic fields oscillate along its direction of travel
Polarisation changes light’s frequency
Light is a transverse electromagnetic wave
Light is a longitudinal electromagnetic wave

Light is a transverse electromagnetic wave

Explanation

Polarisation demonstrates that light is transverse; its electric and magnetic fields oscillate perpendicular to the direction of propagation and to each other. Longitudinal vibration, fields aligned with travel, and a frequency change do not explain polarisation.

29. Light of frequency ff shines on a metal with work function ϕ\phi, where hf>ϕhf>\phi. What is the maximum kinetic energy of the emitted photoelectrons?

hf+ϕhf+\phi
hf−ϕhf-\phi
ϕ−hf\phi-hf
hλ−ϕ\frac{h}{\lambda}-\phi

$$hf-\phi$$

Explanation

The photoelectric equation gives the maximum kinetic energy as the incident photon energy minus the work function. Adding the work function uses the wrong energy balance, substituting momentum confuses momentum with energy, and reversing the subtraction gives the wrong sign.

30. A technician increases the intensity of light on a metal while keeping its frequency fixed above the threshold. What change is expected in the emitted electrons?

A greater photocurrent and greater maximum kinetic energy
A greater maximum kinetic energy, with unchanged photocurrent
No photocurrent unless the frequency also increases
A greater photocurrent, with unchanged maximum kinetic energy

A greater photocurrent, with unchanged maximum kinetic energy

Explanation

At fixed frequency, greater intensity produces more electrons per second and therefore a larger photocurrent, while maximum kinetic energy depends on frequency. The other responses confuse intensity with frequency, incorrectly assign more energy to each electron, or misapply the threshold condition.

31. An electron in an atom moves from a higher energy level to a lower one with an energy difference of magnitude ΔE\Delta E. What does the atom do?

Emits a photon with energy equal to the lower-level energy
Emits a photon with energy ΔE\Delta E
Absorbs a photon with energy ΔE\Delta E
Emits a photon whose wavelength equals ΔE\Delta E

Emits a photon with energy $$\Delta E$$

Explanation

A transition to a lower level emits a photon, and its energy equals the magnitude of the energy difference. Absorption accompanies an upward transition; the photon energy is not just the lower-level energy, and an energy difference is not a wavelength.

32. Two moving particles have momenta pp and 3p3p. How do their de Broglie wavelengths compare?

The particle with momentum 3p3p has one-third the wavelength
The particle with momentum 3p3p has one-ninth the wavelength
The particle with momentum 3p3p has three times the wavelength
Both particles have the same wavelength

The particle with momentum $$3p$$ has one-third the wavelength

Explanation

Because λ=hp\lambda=\frac{h}{p}, tripling momentum reduces the de Broglie wavelength to one-third. A directly proportional relation gives the inverse trend, equating momentum with wavelength omits the relation, and a squared dependence introduces an unsupported power.

33. A spacecraft moves at constant speed in a straight line relative to an inertial observer, then turns while maintaining the same speed. During which part of its motion is the spacecraft's frame inertial?

During neither part, because the spacecraft is moving
During both the straight-line motion and the turn
During the turn, because its speed stays constant
During the straight-line, constant-velocity motion

During the straight-line, constant-velocity motion

Explanation

An inertial frame is not accelerating: constant-velocity motion is inertial, but turning changes velocity and is accelerated motion even at constant speed. The alternatives respectively mistake constant speed for constant velocity, overlook the turn, or incorrectly treat all motion as acceleration.

34. A clock measures a proper time interval t0=4 st_0=4\,\text{s} between two events, and an observer measures the interval with Lorentz factor γ=1.5\gamma=1.5. What interval does the observer measure?

5.5 s5.5\,\text{s}
9 s9\,\text{s}
6 s6\,\text{s}
83 s\frac{8}{3}\,\text{s}

$$6\,\text{s}$$

Explanation

Time dilation gives t=γt0t=\gamma t_0, so t=1.5×4 s=6 st=1.5\times4\,\text{s}=6\,\text{s}. Dividing reverses the relation, adding mixes a factor with a time interval, and squaring the factor applies an extra dilation.

35. A rod has proper length L0=12 mL_0=12\,\text{m} and moves relative to an observer for whom γ=2\gamma=2. What length does that observer measure along the direction of motion?

6 m6\,\text{m}
24 m24\,\text{m}
10 m10\,\text{m}
3 m3\,\text{m}

$$6\,\text{m}$$

Explanation

Length contraction gives L=L0γ=12 m2=6 mL=\frac{L_0}{\gamma}=\frac{12\,\text{m}}{2}=6\,\text{m}. Multiplication predicts expansion, subtraction does not follow the contraction formula, and dividing by γ2\gamma^2 applies an extra factor.

36. A student changes the temperature of water and measures how quickly sugar dissolves, while keeping the amount of sugar and water constant. Which variable is the dependent variable?

The volume of water used
The time taken for the sugar to dissolve
The amount of sugar used
The temperature of the water

The time taken for the sugar to dissolve

Explanation

The dependent variable is the quantity measured, which here is the dissolving time. Temperature is the independent variable, while the sugar amount and water volume are controlled variables.

37. Two laboratories measure the same quantity. Each laboratory obtains closely grouped repeated readings, but their average readings differ from one another. Which description best fits the readings within each laboratory?

They show high accuracy relative to the true value
They show high validity for the intended measurement
They show high precision within each laboratory
They show high reproducibility between the laboratories

They show high precision within each laboratory

Explanation

Precision describes how close repeated measurements are to one another, so tightly grouped readings within each laboratory indicate high precision. Reproducibility concerns consistency when investigators or conditions change; accuracy requires closeness to the true value, and validity concerns whether the method tests its intended target.

38. A balance adds the same extra amount to every mass reading, shifting all results in one direction. What kind of error does this indicate?

Measurement uncertainty
A random error
A human mistake
A systematic error

A systematic error

Explanation

A systematic error shifts results consistently in one direction, as with a balance that adds the same extra amount. Random error produces scatter, a human mistake arises from carrying out or recording a procedure incorrectly, and uncertainty estimates doubt in a measurement.

39. A student’s results show a steady rise in temperature as heating time increases. Which evaluation step should follow the statement that the results support the hypothesis?

Quote a specific trend or measured value
Repeat whether the hypothesis was supported
Suggest a practical improvement
Identify a limitation or source of error

Quote a specific trend or measured value

Explanation

An evaluation should support its judgment about the hypothesis by quoting a specific trend or value. Identifying an error source, explaining its effect, and suggesting an improvement are further evaluation steps, not substitutes for citing evidence.

40. A cyclist travels at 72 km/h72\text{ km/h}. What is this speed in metres per second?

72,000 m/s72{,}000\text{ m/s}
20 m/s20\text{ m/s}
259.2 m/s259.2\text{ m/s}
7.2 m/s7.2\text{ m/s}

$$20\text{ m/s}$$

Explanation

To convert kilometres per hour to metres per second, divide by 3.6: 72÷3.6=20 m/s72\div3.6=20\text{ m/s}. Multiplying by 3.6 reverses the conversion, while the other values result from unsuitable factors.

41. A sensor records a wavelength of 5 nm5\text{ nm}. Which value expresses the same wavelength in metres?

5×10−6 m5\times10^{-6}\text{ m}
5×10−9 m5\times10^{-9}\text{ m}
5×10−12 m5\times10^{-12}\text{ m}
5×10−3 m5\times10^{-3}\text{ m}

$$5\times10^{-9}\text{ m}$$

Explanation

The nano prefix represents 10−910^{-9}, so 5 nm=5×10−9 m5\text{ nm}=5\times10^{-9}\text{ m}. The alternatives use the powers for milli, micro, and pico, respectively.

Study with flashcards

Lock in the answers with 94 flashcards on VCE Physics Motion Fields and Waves.

What does a net force cause an object to do?

Accelerate.

For constant acceleration, what equation relates final velocity, initial velocity, acceleration, and time?

v=u+atv=u+at

What formula gives work done by a force?

W=FΔxcos⁡θW=F\Delta x\cos\theta

See the flashcards →

Read the study guide

Go over the full study guide for VCE Physics Motion Fields and Waves.

Read the study guide →

Related classes

Make your own practice quizzes

Upload your class notes and Revizly writes a practice quiz with explained answers in about a minute.

Quiz maker