Heat Engine Fundamentals Practice Quiz (21 questions)

All questions and answers

1. Which description best explains how a heat engine produces mechanical work?

It converts combustion heat into electrical energy through a generator.
It converts all combustion heat into mechanical work through a working fluid.
It converts combustion heat into mechanical work without a working fluid.
It converts part of combustion heat into mechanical work through a working fluid.

It converts part of combustion heat into mechanical work through a working fluid.

Explanation

A heat engine converts part of the heat released by fuel combustion into mechanical work through a working fluid. Direct electrical generation omits the stated output, and the other errors omit the working fluid or incorrectly claim complete heat conversion.

2. What happens to the working fluid's composition over an engine cycle?

Its thermodynamic state changes while its composition remains fixed.
It consists entirely of combustion products throughout the cycle.
It remains air with a constant composition throughout the cycle.
Its proportions of air, fuel, residual gases, and combustion products vary.

Its proportions of air, fuel, residual gases, and combustion products vary.

Explanation

The working fluid changes in both thermodynamic state and composition, with air, fuel, residual gases, and combustion products present in varying proportions. Treating it as unchanged air, pure products, or fixed-composition fluid misses those compositional changes.

3. Which set names the three functional groups into which engine elements are organized?

Engine group, auxiliary systems, and moving mechanism
Engine group, auxiliary systems, and gas passages
Engine group, auxiliary systems, and surveillance and control equipment
Engine group, cylinder structure, and surveillance and control equipment

Engine group, auxiliary systems, and surveillance and control equipment

Explanation

The three functional groups are the engine group, auxiliary systems, and surveillance and control equipment. Cylinder structure, moving mechanism, and gas passages are engine features or components, not substitutes for those groups.

4. A mechanic is sorting parts by functional group. Which description identifies what belongs to the engine group?

Fuel, cooling, and lubrication systems that support engine operation
The fixed structure without the mechanism transmitting mechanical work
Equipment that measures and regulates the engine's operating regime
The fixed structure and the moving mechanism that transmits mechanical work

The fixed structure and the moving mechanism that transmits mechanical work

Explanation

The engine group includes both the fixed structure and the moving mechanism that transmits mechanical work. Fuel, cooling, and lubrication systems are auxiliary systems, while measurement and regulation belong to surveillance and control.

5. During an inspection, a technician finds a housing that supports the crankshaft region. Which fixed engine part is it?

The cylinder block
The upper crankcase
The lower crankcase or oil pan
The cylinder head

The upper crankcase

Explanation

The upper crankcase supports the crankshaft region. The cylinder block contains and supports the cylinders, the lower crankcase or oil pan closes the bottom and stores oil, and the cylinder head closes the cylinder's upper part.

6. In an engine, cylinder pressure pushes a piston and the crankshaft turns. Which sequence describes how the moving mechanism transmits this force to produce rotation?

Piston, connecting rod, piston pin, crankshaft, crank throw
Flywheel, crankshaft, crank throw, connecting rod, piston
Piston, piston pin, connecting rod, crank throw, crankshaft
Piston, piston pin, crankshaft, connecting rod, crank throw

Piston, piston pin, connecting rod, crank throw, crankshaft

Explanation

Cylinder-pressure force passes from the piston through the piston pin and connecting rod to the crank throw, which turns the crankshaft. The other sequences misplace a component in this force path or begin with the flywheel.

7. After force has been transmitted to the crankshaft, what does the crankshaft do with that force?

Transmits it between the piston and the crank throw
Seals the cylinder and controls oil around the piston
Converts it into rotary motion and delivers torque to the flywheel
Stores lubricating oil and supports the lower crankcase

Converts it into rotary motion and delivers torque to the flywheel

Explanation

The crankshaft converts transmitted forces into rotary motion and delivers torque to the flywheel. Force transmission between piston and crank throw is the connecting rod's role; sealing and oil control belong to the piston rings, while oil storage is associated with the oil pan.

8. A piston reaches its upper extreme position, and the cylinder volume is at its smallest. Which position is this?

Top Dead Centre, at the clearance volume
The stroke, at the clearance volume
Bottom Dead Centre, at the total cylinder volume
Bottom Dead Centre, at the clearance volume

Top Dead Centre, at the clearance volume

Explanation

At Top Dead Centre, the piston is at its upper extreme and cylinder volume equals the minimum clearance volume. Bottom Dead Centre is the lower, maximum-volume position, while stroke names the travel between the two positions.

9. A piston is at its lower extreme, where the cylinder contains its maximum volume. Which geometric position has it reached?

Bottom Dead Centre, at the clearance volume
The stroke, at the total cylinder volume
Bottom Dead Centre, at the total cylinder volume
Top Dead Centre, at the clearance volume

Bottom Dead Centre, at the total cylinder volume

Explanation

At Bottom Dead Centre, the piston is at its lower extreme and cylinder volume equals the maximum total cylinder volume. TDC is the minimum-volume position, and stroke is the distance traveled between the endpoints.

10. A cylinder has bore D=80 mmD = 80\,\mathrm{mm} and stroke S=100 mmS = 100\,\mathrm{mm}. Using VS[L]=(πD2/4)S×10−6V_S[\mathrm{L}] = (\pi D^2/4)S \times 10^{-6}, what is its swept volume to three significant figures?

502.7 L
0.00628 L
0.503 L
0.0251 L

0.503 L

Explanation

The swept volume is π(80)24(100)×10−6≈0.503 L\frac{\pi(80)^2}{4}(100) \times 10^{-6} \approx 0.503\,\mathrm{L}. Omitting the unit conversion gives a value in cubic millimetres, while the other distractors misuse the bore or cylinder geometry.

11. An engine test bench needs separate instruments to record engine speed and temperature. Which instruments should be used, respectively?

Torque meter and pressure transducer
Thermocouple and tachometer
Tachometer and thermocouple
Pressure transducer and torque meter

Tachometer and thermocouple

Explanation

A tachometer measures engine speed, and a thermocouple measures temperature. A torque meter measures torque, a pressure transducer measures pressure, and the reversed thermocouple–tachometer pairing assigns each requested measurement to the wrong instrument.

12. In a running engine, combustion heats the working fluid and cylinder pressure pushes the piston. What mechanical change ultimately produces crankshaft rotation?

Fixed parts convert piston reciprocation into rotation
Moving parts convert piston reciprocation into rotation
The working fluid converts crankshaft rotation into piston reciprocation
Cylinder pressure converts crankshaft rotation into piston reciprocation

Moving parts convert piston reciprocation into rotation

Explanation

Moving parts transmit the piston’s reciprocating motion and convert it into crankshaft rotation. The other choices reverse the motion pathway, assign the conversion to fixed structure, or treat heat or pressure as the mechanical conversion itself.

13. An engineer distinguishes the engine’s supporting framework from measurements that describe its cylinder geometry. Which classification is correct?

Fixed parts support the structure; bore, stroke, and cylinder volumes define geometry
Moving parts support the structure; torque, speed, and pressure define geometry
Bore, stroke, and cylinder volumes support the structure; fixed parts define geometry
Auxiliary systems support the structure; temperature and fuel quantity define geometry

Fixed parts support the structure; bore, stroke, and cylinder volumes define geometry

Explanation

Fixed parts form and support the engine structure, whereas bore, stroke, and cylinder volumes describe its basic geometry. The alternatives confuse fixed with moving parts, reverse structure and geometry, or substitute operating measurements and auxiliary systems for geometric dimensions.

14. In a laboratory test, a spark plug’s electrodes produce an electric spark to start combustion, and the idealized cycle models heat addition at constant volume. Which engine family does this describe?

Diesel-cycle engine
Compression-ignition engine
Spark-ignition engine
Dual-fuel engine

Spark-ignition engine

Explanation

An electric spark between spark-plug electrodes and constant-volume heat addition identify the spark-ignition family and its idealized Otto cycle. Compression ignition relies on fuel self-igniting in hot compressed air, while the idealized Diesel cycle uses constant-pressure heat addition; dual-fuel describes a fuel-use classification.

15. An engineer classifies an engine by whether its cylinders are in-line or arranged in a V, and by whether it powers a truck or a locomotive. Which two classification criteria are being used?

Cylinder arrangement and engine application
Cylinder-axis position and number of fuels
Cylinder arrangement and fuel state
Combustion-chamber compartments and engine application

Cylinder arrangement and engine application

Explanation

In-line and V describe the arrangement of cylinders, while truck and locomotive describe engine application. Cylinder-axis position concerns whether an axis is vertical, tilted, or horizontal; fuel type and chamber compartments are separate criteria.

16. A piston engine completes each operating cycle in four piston strokes. How many crankshaft revolutions and crank-angle degrees does one cycle span?

Two revolutions and 720°CA
Four revolutions and 720°CA
One revolution and 360°CA
Two revolutions and 360°CA

Two revolutions and 720°CA

Explanation

A four-stroke cycle takes four piston strokes, which span two crankshaft revolutions, or 720°CA. One revolution and 360°CA describe a two-stroke cycle; counting one revolution per stroke doubles the required revolutions.

17. During a four-stroke cycle, a student labels combustion as a separate piston stroke between compression and expansion. Which description corrects this classification?

Combustion begins near the end of compression and continues into expansion
Combustion takes place during exhaust as burned gases leave the cylinder
Combustion occurs as a separate stroke after compression and before expansion
Combustion begins at the start of compression and ends before the piston reaches TDC

Combustion begins near the end of compression and continues into expansion

Explanation

Combustion begins near the end of compression and continues across the transition into expansion; it is a physical process, not a separate piston stroke. Treating it as an independent stroke miscounts the cycle, while the other descriptions place combustion in the wrong phases.

18. A four-stroke engine runs at 2400 rpm. What is its cycle frequency?

20 cycles per second
80 cycles per second
40 cycles per second
0.05 cycles per second

20 cycles per second

Explanation

For a four-stroke engine, τ=4\tau=4, so νC=240030×4=20\nu_C=\frac{2400}{30\times4}=20 cycles per second. Using τ=2\tau=2 gives 40, omitting 30 gives 600 divided by 4, and 0.05 is the cycle period in seconds.

19. When interpreting a p–α diagram, what does the marker y identify?

Spark discharge or injection onset
Intake-valve opening
Maximum cylinder pressure
End of heat release

Maximum cylinder pressure

Explanation

The marker y denotes maximum cylinder pressure on the pressure-versus-crank-angle diagram. The end of heat release is marked t, spark or injection onset is marked s, and IVO denotes intake-valve opening.

20. As a piston moves from BDC toward TDC during a compression stroke, how does cylinder volume change?

It increases from minimum toward maximum
It remains at its maximum value
It decreases from maximum toward minimum
It remains at its minimum value

It decreases from maximum toward minimum

Explanation

Cylinder volume decreases as the piston moves from BDC to TDC, reaching its minimum at TDC. The increasing-volume choice reverses the motion relationship, while the constant-volume choices mistake a moving piston for a stationary one.

21. A combustion process is well phased around TDC. Approximately what fraction of its duration occurs after TDC?

About one half
About three quarters
About one third
About two thirds

About two thirds

Explanation

Well-phased combustion has approximately one third of its duration before TDC and two thirds after TDC, helping increase the high-pressure area and mechanical work. One third reverses the stated proportions, while one half assumes an equal split.

Study with flashcards

Lock in the answers with 78 flashcards on Heat Engine Fundamentals.

What does a heat engine convert part of combustion heat into?

Mechanical work.

Where does fuel burn in an external-combustion engine?

Outside the engine working space.

How does heat reach the working fluid in an external-combustion engine?

It crosses a boundary to reach the working fluid.

See the flashcards →

Read the study guide

Go over the full study guide for Heat Engine Fundamentals.

Read the study guide →

Related classes

Make your own practice quizzes

Upload your class notes and Revizly writes a practice quiz with explained answers in about a minute.

Quiz maker